Single Zone Call Controller With Stainless Steel Enclosure

This item is not available to purchase online.

This item is not available to purchase online. Please contact our sales team for more information.

SKU: NC941/SS Category: Call Systems Brand: C-Tec

Summary

A single zone call controller c/w a 12V 250mA PSU and link-selectable Mute/Reset button.
Fully compatible with C-TEC’s entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Power On and Alarm ‘CALLING’ LEDs.
Open collector output goes to 12V when the controller’s onboard buzzer sounds.
Mounts on a standard UK 25mm double gang flush or surface back box.
Optional NC941B 0.3A battery battery backup kit also available.

Mains Supply : 230V 50/60Hz (36mA max. current). 50Hz frequency
Internal Power Supply : 12V d.c
Total Output Current Limited To : 250mA
Quiescent Current : 0mA (none)
Max Battery Size And Type : Optional NC941B 12V 0.3Ahr battery back up kit available.
Alarm Current : Determined by the number/type of field devices connected to the call controller/system
Auxiliary Relays : None
Open Collector Outputs :1 x Output terminal (goes +12V steady when the controller’s buzzer sounds). 20mA max
Indicators : Red Alarm LED; Green Supply Present LED
Controls : RESET button (can be disabled if required)
Connections : -Ve (common -Ve terminal for all devices); +Ve (+12V nominal supply for powering emergency call points, overdoor lights, etc.); Signal (the trigger line which activates the NC941)
Expansion Connections :Batt + and Batt – (for connection to an optional remote NC941B battery back up kit)
Call Acknowledgement Functionality : No
Product dimensions (mm) : 147 W x 87 H x 34 D mm. Mounts on a standard 25mm UK double gang back box
Construction & Finish : Plastic
IP Rating :IP41
Weight : 0.460kg
Operating Conditions/Temperature : -5ºC to +40ºC. Max. relative humidity 95% non-condensing

Weight	0.46 kg