Baldwin Boxall OCAFR-BZ OmniCALL Flush Mounting Bezel for OCAFRP Fire Telephone
£34.95 (inc VAT: £41.94)
You may also need
Key features
- Required for flush mounting of OCAFRP
- 170 x 390mm bezel dimensions
- 138 x 358mm cutout size
Downloads
Summary
The OCAFR-BZ bezel is what you reach for when a site calls for the Baldwin Boxall OCAFRP fire telephone to sit flush in the wall rather than proud on the surface. On its own the OCAFRP is a surface-mount unit, so this bezel is the piece that lets you offer a neater, flush-fitted finish on jobs where that matters to the client or architect.
View full overview Show less
Specifying it upfront saves you a second site visit or an awkward retrofit once the fire telephone is already wired in. You simply prepare the correct wall opening to the bezel’s cutout size before first fix, then fit the OCAFRP into it at second fix.
Features
- Flush mounting – converts the OCAFRP fire telephone from a surface-mount unit to a flush-fitted installation
- Matched bezel size – 170 x 390mm dimensions frame the outstation cleanly
- Defined cutout – 138 x 358mm opening tells you exactly what to prepare in the wall or panel before fitting
Specifications
| Product Code | OCAFR-BZ |
|---|---|
| For Use With | OCAFRP fire telephone |
| Finish | Red |
| Bezel Dimensions Mm W X H | 170 x 390 |
| Bezel Cutout Mm W X H | 138 x 358 |
FAQ
No. The OCAFRP is designed as a surface-mount unit as standard, and the bezel is only needed where you’re flush mounting the fire telephone into a wall or panel. The bezel cutout is 138 x 358mm (W x H), so mark out and prepare the wall opening to this size before second fix. The bezel itself measures 170 x 390mm (W x H), which you’ll need to allow for alongside the cutout when planning the install. The catalogue lists this as a red finish bezel, in keeping with the red OCAFRP fire telephone it’s designed for. The datasheet doesn’t confirm retrofit fitting details, so confirm with the manufacturer before planning this on an existing installation.Do I need the OCAFR-BZ for every OCAFRP installation?
What cutout should I prepare before fitting?
What are the overall bezel dimensions?
Does the bezel match the OCAFRP finish?
Can the bezel be retrofitted to an OCAFRP already in service?
Downloads
- OCAFRP datasheet (Adobe PDF)
Additional information
| System | OmniCALL |
|---|---|
| Colour | |
| Device Type |