Vesda PIP-001-2.4-W ASD Sampling Pipe | 25mm OD, 2.4m Length, Pack of 25
£78.39 (inc VAT: £94.07)
You may also need
Key features
- Compatible with VESDA, VESDA-E and FAAST FLEX
- 21mm smooth-bore ID for consistent airflow
- Ultra-low halogen content below 0.00001%
Downloads
Summary
The Vesda PIP-001-2.4-W is an ABS sampling pipe for routing air back to the detector in an aspirating smoke detection (ASD) network, and it is built to work across VESDA, VESDA-E and FAAST FLEX systems rather than being tied to a single brand. That matters when you are quoting a job where the end client’s existing network, or your own stock, spans more than one ASD platform.
View full overview Show less
Standardising on one pipe that fits all three systems means fewer part numbers to hold, fewer compatibility checks on site, and less chance of a mismatched fitting holding up first fix. The white finish also gives you an option that sits discreetly against light ceiling tiles or wall finishes where a red pipe would be too visible.
It delivers this through a 25mm OD, 21mm ID smooth-bore design that keeps airflow consistent through long runs, and ABS solvent cement jointing that is compatible with the full range of ASD fittings. Supplied in 2.4m lengths in packs of 25, it is sized for medium to large installations without excessive wastage.
Where white is not required, the standard PIP-001-2.4 offers the same specification in the usual red finish.
Features
- Multi-brand compatibility - one pipe range works across VESDA, VESDA-E and FAAST FLEX networks, cutting down stock lines
- Smooth-bore design - 21mm ID keeps airflow consistent along the sampling run
- Solvent cement jointing - joins quickly with ABS solvent cement and is compatible with the full range of ASD fittings
- White finish - blends with light ceiling tiles and wall finishes for a discreet pipe run
- Ultra-low halogen content - below 0.00001%, useful where halogen content on site is restricted
- Supplied in 2.4m lengths, packs of 25 - sized for medium to large ASD installations with less offcut waste
Specifications
General
| Ordering Code | PIP-001-2.4-W |
|---|---|
| Colour | White |
| Length | 2.4m |
| Pack Quantity | 25 pieces |
| Outer Diameter | 25mm |
| Inner Diameter | 21mm |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Compatible Systems | VESDA, VESDA-E, FAAST FLEX |
| Halogen Content | Below 0.00001% |
Physical
| Specific Gravity | 1.04 (ASTM D792) |
|---|---|
| Melt Mass Flow Rate | 47 g/10 min at 200°C/21.6 kg; 4.1 g/10 min at 200°C/5.0 kg; 34 g/10 min at 220°C/10.0 kg (ASTM D1238) |
| Molding Shrinkage Flow | 0.0040 to 0.0070 in/in (ASTM D955) |
Mechanical
| Tensile Strength | 6670 psi, yield, 23°C (ASTM D638) |
|---|---|
| Tensile Elongation | 15%, yield, 23°C (ASTM D638) |
| Flexural Modulus | 312000 psi, yield, 23°C (ASTM D638) |
| Flexural Strength | 9230 psi, yield, 23°C (ASTM D790) |
| Hardness | Rockwell Hardness (R-Scale) 108 (ASTM D785) |
| Notched Izod Impact | 5.5 ft.lb/in at 3.20mm; 4.8 ft.lb/in at 6.40mm, 23°C (ASTM D256) |
Thermal
| Deflection Temperature Under Load | 85°C (185°F) at 1.8 MPa, unannealed (ASTM D648) |
|---|---|
| Vicat Softening Temperature | 95°C (203°F) (ASTM D1525) |
Flammability
| Flame Rating | HB at 1.60mm, 2.20mm and 3.20mm thickness (UL 94) |
|---|
Compliance
| Approvals | Tested and certified to EN 54-20 and EN 61386-1; manufactured under BS EN ISO 9001 in accordance with BS5391 |
|---|
FAQ
Yes. The PIP-001-2.4-W is manufactured for use across VESDA, VESDA-E and FAAST FLEX ASD systems and is compatible with the full range of ASD fittings, so it can be used to extend or repair an existing VESDA network. Lengths are jointed using ABS solvent cement, which bonds with the compatible ASD fittings to form a sealed run. Follow the fitting manufacturer’s instructions for cure times before pressurising the network. No. The pipe is printed with a clear instruction not to paint it or obstruct its sampling holes, as this can affect air sampling performance. If appearance is a concern, the white finish is intended to reduce the need for painting. The datasheet gives a deflection temperature under load of 85°C (185°F) and a Vicat softening temperature of 95°C (203°F), so the pipe is suited to typical indoor ambient conditions. For installations near unusually high ambient heat sources, check these figures against the specific site conditions. Each pack contains 25 lengths of 2.4m pipe, giving 60m of pipe per pack, which is useful for estimating material quantities on medium to large ASD pipe runs.Will this pipe work with my existing VESDA installation?
How do I join lengths of this pipe together?
Can I paint this pipe to match the ceiling instead of using the white option?
What temperature range is this pipe rated for?
How much pipe is in one pack?
Downloads
- Datasheet (Adobe PDF)
