Haydon HAY-FIRE-DO Remote LED Fire Detector Indicator | Dual Voltage, Single Gang Compatible
£2.69 (inc VAT: £3.23)
Key features
- Dual voltage operation: 3VDC or 24VDC
- Low current draw of 5mA
- Slim 15mm profile for single gang box
Downloads
Summary
The Haydon HAY-FIRE-DO is a remote LED indicator that tells you, at a glance, which hidden fire detector has triggered an alarm, and it runs on either 3VDC or 24VDC without needing a separate interface to match your panel’s output.
View full overview Show less
That dual voltage flexibility means you can specify one indicator across jobs with different detection circuits, rather than carrying two part numbers or adding conversion gear on site. It saves you a decision at the counter and a complication during commissioning.
Wired to a detector operating circuit, the indicator’s red LED lights to confirm which zone or device has activated, which is especially useful where detectors sit above suspended ceilings or in roof voids out of sight. Its slim 15mm depth and single gang footprint let it sit flush against a standard plastic gang box (box not supplied), keeping the finish neat on a corridor or ceiling-mounted installation.
Features
- Dual voltage input – accepts 3VDC or 24VDC so it suits a range of detector circuit designs without extra conversion kit
- Low current consumption – draws just 5mA, keeping the load on the detector circuit to a minimum
- Slim profile – 15mm depth sits flush and tidy once fitted to a standard single gang box
- Clear FIRE / DETECTOR OPERATED faceplate – makes the activated point obvious to anyone on site, including non-specialist staff
- Lightweight plastic enclosure – easy to handle and fix, at just 0.1kg
- UKCA and CE marked – supports compliant specification across UK and EU projects
Specifications
| Operating Voltage | 3VDC or 24VDC |
|---|---|
| Nominal Current Consumption | 5mA |
| Enclosure Material | Plastic |
| Mounting | Fits standard single gang plastic gang box (box not supplied) |
| Dimensions | W.86 x L.86 x H.15mm |
| Weight | 0.1kg |
| Warranty | 3 years |
| Approvals | UKCA, CE, FCC, RoHS |
FAQ
No, it is designed to fit a standard single gang plastic gang box, which is not supplied with the unit. You will need to source a compatible gang box separately before first fix. Yes, the unit accepts either 3VDC or 24VDC input, so the same part works across both voltage types without needing a different model or an interface module. It is intended as a remote indicator for a detector that is otherwise out of sight, such as one mounted above a suspended ceiling or within a roof void. Wiring it to the detector’s operating circuit lets the LED confirm activation without anyone having to access the hidden detector. The datasheet confirms operating voltage and current consumption but does not detail the specific wiring configuration for this unit. Confirm the correct connection method against the detector manufacturer’s wiring diagram, or check with Haydon’s technical documentation, before installing. Nominal current consumption is 5mA, which is low enough that it should not significantly load a typical detector circuit. Still factor it into your overall loop current budget when commissioning, particularly on circuits already close to their limit.Does the HAY-FIRE-DO come with its own back box?
Can I use this with a 24V fire panel and also with a 3V detector circuit?
Where would I typically fit this indicator?
Is the LED indicator wired in series with the detector or does it need its own power feed?
What current does the indicator draw, and will it affect my detector loop?
Downloads
- Datasheet (Adobe PDF)
Additional information
| Mounting | Flush |
|---|---|
| Device Type | |
| Label | Fire Detector Operated |
| Integrated Buzzer | |
| Environment |