EvacGo Single Relay Output Module with Built-in Isolator
£68.47 (inc VAT: £82.16)
You may also need
Key features
- Loop-powered design
- Built-in short circuit isolator
- Auto addressing capability
Downloads
Summary
The 20-VMMC120-ADV Single Relay Output Module is a loop-powered device designed with a fully digital protocol to provide form C changeover contacts. This module is ideal for controlling equipment for DDA compliance, such as vibrating pillows, ensuring accessibility and safety.
View full overview Show less
The output channel of the module is a normally de-energised relay that is activated by a command from the control panel. It offers a fast and secure response, incorporating a bidirectional short circuit isolator for enhanced reliability.
Connections are facilitated through plug-in terminal blocks that accommodate conductors up to 2.5 mm², allowing for easy installation. The module can be conveniently mounted within an electrical box or enclosure.
Features
- Short circuit isolators in each device to the requirements of EN54-17
- Auto addressing capability by the control panel or manually using a hand held programmer
- Digital checking of double address
- Line quality information
- Bicolour (red/green) LED driven by the control panel
Specifications
- Power Supply : 15-40 Vdc
- Maximum Current Consumption : 6 mA
- Operating Temperature Range : -30°C to +70°C
- Humidity (Non Condensing) : 85% RH
- Relay Switching : 2A / 30 Vdc
- Dimensions H x W x D : 52 x 75 x 28 mm
- Weight : 180 g
- IP Rating : 21C
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 1 kg |
|---|---|
| Device Type |
