Apollo
Showing 101–150 of 189 results
-
Apollo Orbis TimeSaver Sav-Wire Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo Intelligent Test Set
- Seven-inch LCD touch screen display for intuitive operation
- Compatible with XP95, Discovery and CoreProtocol ranges
- Lithium-ion battery powered with USB connectivity
-
Apollo SC2900-001 Conventional Manual Call Point
- Resettable operating element.
- Easy access, front reset mechanism.
- Ergonomic reset key.
- EN54-11 certified.
- 170° viewable LED.
- Suitable for flush or surface mouting.
- Optional hinged cover.
-
Apollo Series 65 12V DC Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Base Mounted UV Flame Detector
- Responds to stationary flames with no flicker
- Sensitive to UV radiation emitted by flames during combustion
- Compact flame detector which fits into Series 65 bases
- Zone-powered
-
Apollo Series 65 Diode Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 Ionisation Smoke Detector
The Apollo Series 65 Ionisation Smoke Detector uses twin compensating chambers and an Americium 241 radioactive source to detect smoke.
-
Apollo Series 65 or XP95 Base Cover
- Protects base when the detector is not in place.
- Aesthetically pleasing.
-
Apollo Series 65 Sav-wire Base
- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
-
Apollo XPERT White Universal Address Card
- Compatible with XPERT 7 & 8
- Includes 128th pip
- High tolerance lead-in
-
Apollo Waterproof Base Cover
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo Weatherproof Multi-Tone Open-Area Sounder Visual Indicator with Isolator (Red)
- Choice of tones on standard device: Apollo, Slow Whoop, and DIN.
- IP66 rated.
- Two Volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
- Individual and group addressing.
- Built in isolator.
-
Apollo XP95 3 Channel Input/Output Unit
- Uses a single address.
- Allows independent monitoring of input channels.
- Allows independent control of output relays.
-
Apollo XP95 Addressable Call Point with Isolator
- EN54-11 Approved (EN54-17 Approved for Isolator version)
- E-Z fit connectors
- Front facing addressing without the need to detach the backbox
- A unique, ergonomically designed key for resetting and front cover removal
- Backward compatibility and retro-fit
- Resettable element
-
Apollo XP95 Addressable Output Unit
- The Output Unit provides a voltage free single pole, changeover relay output.
- It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.
-
Apollo XP95 Sounder VAD Base
- EN54-23 compliant VAD with built-in isolator
- Two adjustable volume ranges 55–91dB(A)
- Unique acoustic and VAD self-test capability
-
Apollo XP95 Ancillary Base Sounder
- For use on an XP95/Discovery systems.
- Sound output of 85dB(A) at 1 metre.
- Current consumption of only 3mA.
- Loop-powered.
- Responds to signals from the associated detector – does not have an address of its own.
-
Apollo XP95 and Discovery Transparent Manual Call Point Hinged Cover
- Prevents Accidental Enable
- Fits XP95 and Discovery Call Points
-
Apollo XP95 Blanking Cap For Base Sounders
- Blanking cap for XP95 sounder or combined sounder & flasher bases.
- Suitable for applications where no detector is required.
- Available in either red or white.
-
Apollo XP95 Dual Channel DIN-Rail Isolator
- Two independent isolators in one DIN-rail housing
- Loop-powered with visual LED fault indication
- Supports up to 20 XP95 detectors between isolators
-
Apollo XP95 DIN-Rail Mains Switching Input / Output Unit
- It can report fault, switch open and switch closed levels
- Three visible LEDs
- Capable of switching up to 8A at 250V AC
- Fits a standard 35mm DIN-Rail
-
Apollo XP95 DIN-Rail Sounder Controller (5 Amperes)
- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronised with loop sounders
- An opto-coupled input is provided to monitor the state of the external power supply
- Features group addressing
- Will accept a load of up to 5A
-
Apollo XP95 High Temperature Heat Detector
- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 I.S MEDC Manual Call Point
- Robust design
- Waterproof
- Reports an alarm in under 0.2 seconds
-
Apollo XP95 I.S. Manual Call Point
- Intrinsically safe for use in hazardous areas
- IP67 rated for indoor and outdoor applications
- Rapid alarm reporting in less than 0.2 seconds
-
Apollo XP95 I.S. Mounting Base
- Universal XPERT card addressing
- One-way fit design
- Only accepts intrinsically safe detectors
-
Apollo XP95 Input/Output Unit With Isolator
The Apollo XP95Â Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
-
Apollo XP95 Intelligent Deep Base
Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.
-
Apollo XP95 Intelligent Heater Base
The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.
-
Apollo XP95 Intelligent Isolator
- Patented short-circuit detection technology
- Automatic restoration when fault cleared
- Compatible with XP95, Discovery and CoreProtocol systems
-
Apollo XP95 Intelligent Isolator Base
This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.
-
Apollo XP95 Intelligent Mounting Base in White or Black
- XPERT Addressing.
- One way fit of detector.
- Locking feature to prevent unauthorised detector removal.
-
Apollo XP95 Intelligent Twin Switch Monitor
- Twin switch montor for Apollo intelligent systems.
- Improved design for ease of wiring meaning faster installation.
- Contains controllable isolator.
- Address range 1 - 254.
- Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems.
-
Apollo XP95 Isolating Base
The XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.
-
Apollo XP95 Loop Powered VAD, White Body, White Flash, Ceiling Category
- Uses high intensity LED.
- EN 54-23 Compliant Category C VAD.
- Flash rate 0.5Hz.
- Fault signal if LED check failed.
-
Apollo XP95 Loop-Powered Visual Indicator Base with Isolator
- Visual indicator flash rate of once per second
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique visual indicator self-test
- Loop-powered
- Built-in Isolator
-
Apollo XP95 Mini Switch Monitor
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo XP95 Multi-tone Open Area Indoor Sounder
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of ‘alert’ and ‘evacuate’ tones.
- Individual & group addressing.
- Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.
-
Apollo XP95 Multisensor Detector
- Sensitive to a wide range of fires
- Well suited for environments such as hotel bedrooms
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 Open-Area Sounder & Beacon, Red Body, Red Lens
- Choice of tones on standard device: Apollo, Slow Whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
-
Apollo XP95 Pre-Addressed XPERT Cards Full Set (1-126)
- Simplifies and speeds up installation and commissioning.
- Uses patented proven technology.
- Address remains the same, no matter how often detectors are replaced.
- Flexibility to create any address.
-
Apollo XP95 Sounder Circuit Controller
- The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.
- Allows sounders to be operated continuously or be pulsed; 1 second on, 1 second off
- May be synchronised with loop sounders
-
Apollo XP95 Spare XPERT Address Card
A universal address card supplied with all bases. Using a coding guide, pips are removed to set the address of the inserted detector.
-
Apollo XP95 Switch Monitor
- Designed to monitor one or more Single Pole Volt Free Contacts and report the status
- 4 Input States
- Two Visable LED's
- Loop Powered
-
Apollo XP95 VAD Base with Isolator
Key Features
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
-
Apollo XP95 Zone Monitor Unit with Isolator
- Fitted with a bi-directional short circuit isolator
- unaffected by loop short circuits