No

• Improved sensitivity to black smoke
• Compensation for build-up of dirt
• Extra confirmation of smoke before an alarm signal is given

• Designed for seamless integration with Orbis systems
• Simplifies installation and enhances detector performance
• Ensures reliability and compatibility with various fire alarms

• Grouped terminals to make wiring easy
• Two fixing centres
• LED alignment mark
• Cable stripping guide
• Detector locking mechanism
• Is used in 'Sav-Wire' systems

• Detector locking mechanism
• One way fit
• Easy to wire
• Contains an earth connector
• Can be used in fire and security systems

• Detector locking mechanism
• Easy to wire
• Contains an earth connector
• Terminal for remote indicator

• Detector locking mechanism
• One way fit
• Easy to wire
• Contains an earth connector

• Allows Series 65 conventional detection to work on Sav-Wire panels
• Detector locking mechanism
• Contains an earth connector
• Easy to wire

• Detector locking mechanism
• Easy to wire
• Contains an earth connector
• Terminal for remote indicator

• Detector locking mechanism
• One way fit
• Easy to wire
• Contains an earth connector

• Choice of tones on standard device: Apollo, Slow Whoop, and DIN.
• IP66 rated.
• Two Volume settings 92dB(A) and 100dB(A).
• Synchronisation of 'alert' and 'evacuate' tones.
• Individual and group addressing.
• Built in isolator.

• EN54-23 compliant VAD with built-in isolator
• Two adjustable volume ranges 55–91dB(A)
• Unique acoustic and VAD self-test capability

• For use on an XP95/Discovery systems.
• Sound output of 85dB(A) at 1 metre.
• Current consumption of only 3mA.
• Loop-powered.
• Responds to signals from the associated detector – does not have an address of its own.

Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.

The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.

• Patented short-circuit detection technology
• Automatic restoration when fault cleared
• Compatible with XP95, Discovery and CoreProtocol systems

This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.

• XPERT Addressing.
• One way fit of detector.
• Locking feature to prevent unauthorised detector removal.

The XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.

• Uses high intensity LED.
• EN 54-23 Compliant Category C VAD.
• Flash rate 0.5Hz.
• Fault signal if LED check failed.

• Visual indicator flash rate of once per second
• Synchronisation of visual indicator flash
• Individual and group addressing
• Unique visual indicator self-test
• Loop-powered
• Built-in Isolator

• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of ‘alert’ and ‘evacuate’ tones.
• Individual & group addressing.
• Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.

• Choice of tones on standard device: Apollo, Slow Whoop and DIN.
• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of 'alert' and 'evacuate' tones.

• EN 54-23 Certified Category O VAD
• 0.5Hz Flash Rate (white)
• Synchronisation of VAD flash
• Individual & group addressing
• Unique VAD self-test
• Loop-powered
• Built-in isolator

• Easily fitted within or on control cabinets.
• Easily fitted to most surfaces.
• Can be used in exposed locations.