Shopping Basket

0 Items

Subtotal £0.00

Eaton

Eaton FX201 Conventional Manual Call Point | Glass Element, Indoor

£9.63 (inc VAT: £11.56)

Low Stock

SKU: FX201 Category: Brand:

Key features

  • IP24 rated for weatherproof wall mounting
  • Non-resettable glass disc element
  • Compact 87 x 87 x 53 mm ABS housing

Downloads

Summary

The Eaton FX201 is a conventional manual call point (MCP) built for sites where the device needs to cope with more than a dry indoor corridor, thanks to its IP24 rating that suits both internal wall surfaces and weatherproof external mounting. That flexibility means you can specify one device across a mixed site rather than sourcing a separate outdoor-rated unit for exposed locations.

View full overview Show less

For you on site, that translates into fewer part numbers to carry and less risk of fitting the wrong variant at an external door or covered walkway. The FX201 achieves this with a rugged ABS red plastic housing and a glass disc operating element, wired into any conventional (non-addressable) fire alarm system via rear cable entry.

Features

  • IP24 weatherproof rating – fit the same call point on sheltered external walls as well as internal corridors
  • Glass disc operation – a visible, tamper-evident break-glass element that signals when the point has been activated
  • Rear cable entry – keeps wiring concealed behind the unit for a tidy finish
  • Compact 87 x 87 x 53 mm footprint – fits standard back boxes without extra depth to account for
  • Lightweight ABS construction – 0.2 kg unit that’s quick to handle and fix during first and second fix
  • Non-resettable design – the glass disc must be replaced after activation, giving a clear physical record that the point was used
  • EN 54 Part 11 certified – meets the European standard for manual call points

Specifications

Catalogue NumberFX201
ColourRed
Construction MaterialABS plastic
Product Length/Depth87 mm
Product Width87 mm
Product Height53 mm
Product Weight0.2 kg
Degree Of Protection (Ip)IP24
Mounting PositionWall (weatherproof), wall surface (internal)
Cable EntryRear
System TypologyConventional (non-addressable)
ResettableNo
Fitted WithGlass disc
Type Of MessagingFire brigade alarm (red)
ApprovalsEN 54 Part 11 (manual call point)

FAQ

Can I fit the FX201 outside?

Yes, it carries an IP24 rating which the manufacturer lists alongside a weatherproof wall mounting position, so it’s suited to sheltered external locations as well as internal wall surfaces. If the location is fully exposed to driving rain, check the IP24 figure against the exposure level expected at that spot before committing.


Is this call point resettable after use?

No. The FX201 uses a glass disc element, so once it has been broken to raise the alarm the disc itself needs replacing rather than the unit being reset in place. Keep spare glass discs in your van stock if you’re maintaining a system with these fitted.


Will the FX201 work with my existing conventional panel?

The FX201 is a conventional (non-addressable) call point, so it will wire into any conventional fire alarm panel that supports standard call point circuits. It isn’t an addressable device, so it won’t report a unique identifier back to the panel, only a zone-level alarm signal.


How does the cable enter the back box?

Cable entry is from the rear of the unit, so plan your containment and back box position accordingly before first fix. There’s no side entry option listed, so make sure cabling routes behind the mounting point rather than in from the side.


What back box do I need for the FX201?

The unit measures 87 mm wide, 87 mm deep and 53 mm high, which fits standard surface or flush mounting back boxes used for call points of this size. Confirm the exact back box depth against your supplier’s range if you’re working to a tight recess.


Downloads

Additional information

Environment

System Type

Hazardous Applications

Marine Applications

Short Circuit Isolator

Device Type

Colour

Operating Element

Mounting

Surface

Cover

Trade
Account
Enquiry?