DPL Wireless Pager Signal Booster Unit
£453.85 (inc VAT: £544.62)
Key features
- Can be powered from existing DC powered equipment on site or from mains supply.
- Supplied with aerial, plug in power adaptor & full instructions.
- Frequency selectable.
- Pager Transmit baud rates selectable.
Downloads
Summary
The best Pocsag Paging Booster on the market today. Collects calls locally & then boosts the calls direct to any Pocsag Pocket Pager which supports pocsag protocol. Full technical backup by our professionally trained staff.
View full overview Show less
Programming
Fully programmable using a standard PC. (Requires programming lead). Programming software free of charge.
- Supplied with stub aerial, plug in power adaptor & full operating instructions.
- Not up to programming the paging transmitter ? Well let us program it for you.
- Programming of transmitter is totally free of charge.
- We can even supply the pocket pagers to go with your transmitter.
- Works with all Pocsag Pocket Pagers.
Frequency & Baud Rate
Choose your preferred transmit frequency as they are all selectable, even the transmit & communication port baud rate can be selected in programming.
Serial 9 Way D Connector
This connection allows you to program the product.
Powering The Transmitter
Two options are available to power the transmitter. Maximum power consumption 300 ma.
- Transmitter supplied with Mains power adaptor, which plugs in to base of product.
- Transmitter can be powered from a 7.5 – 30 volt DC source.
Key Features
- Can be powered from existing DC powered equipment on site or from mains supply.
- Supplied with aerial, plug in power adaptor & full instructions.
- Frequency selectable.
- Pager Transmit baud rates selectable.
- 9 way D serial Communications port for programming.
- Transmit range of up to 1 mile with 1/4 wave aerial. Larger area coverage possible 5 – 8 miles.
- LED indicator to show transmit status.
- Low consumption switch mode power supply.
- Free PC programming software.
- Power the transmitter with standard alarm, telephone or cat5e cable over long cable runs without any power loss or performance.
Specifications
- Transmit Frequency : 454 – 462 MHz ( Selectable frequencies)
- Transmit Baud Rate : 512 – 1200 (Selectable)
- Band : UHF
- Modulation Type : FSK
- Transmitter Power : 10 or 100 or 500mw (Requested when ordering)
- Aerial Connector : BNC
- Radio Standards : EN 300 220-3
- EMC Standards : ETSI – EN 301 489-3
- Transmission Format : Pocsag
- Programming Com Port : Female 9 way D connector. 1200, 2400 or 9600 Baud rate. (Selectable)
- Power Supply : Built in Switch mode power supply
- Power Supply Input : 7.5 – 30 volt DC. (Internal connector block)
- External Power Connector : 7.5 – 30 volt DC (2.5 jack centre +V) (Power adaptor supplied)
- Average Consumption : Standby 50ma – Transmit 50 – 300ma depending on transmit power
- Case Size : W 125mm, L180mm, H 35mm
- RoHS Compliant : Yes
- CE Compliant : Yes
- Warranty Period : 18 months
Downloads
- Datasheet (Adobe PDF)
- Quick Install Guide (Adobe PDF)
Additional information
| Weight | 2 kg |
|---|---|
| Device Type | |
| System Type |