Notifier M701E | Single Output Module | Built-in Short Circuit Isolation, Form C Contacts
£66.56 (inc VAT: £79.87)
Summary
The NOTIFIER M701E Single Output Module is part of the advanced M700E series of Input/Output modules, designed to provide reliable switching control for external devices in fire safety and building automation systems. This module optionally supervises wiring to load devices and switches an external power supply to operate these devices upon command from the control panel.
Featuring built-in short circuit isolation capability, the M701E offers both supervised and unsupervised operating modes. In normal supervised mode, the device switches out load supervision and switches in external power supply through a double pole relay, while monitoring the external power supply and raising fault conditions if voltage falls below threshold. The unsupervised mode provides a single form C set of changeover contacts without supervision.
The module’s versatile mechanical design allows mounting in common wall boxes, on DIN rails, or in dedicated enclosures, with integrated DIN brackets and easily accessible rotary address switches. Enhanced visibility features include enlarged light pipes and tri-colour status LEDs viewable from two sides.
Features
- Built-in short circuit isolators with individual module selection/deselection
- Double pole relay switching with external power supply monitoring
- Form C changeover contacts rated 2A at 30VDC resistive load
- Supervised and unsupervised operating modes
- Multiple mounting options: wall box, DIN rail, or dedicated enclosure
- Integrated DIN rail brackets built into enclosure
- Addressability through rotary switches visible from two sides
- Tri-colour status LED with improved light guide visibility
- Quick connectors for easy installation and maintenance
- Laser engraved labels for lifetime durability
- CLIP and Advanced Protocol support
- IP30 rating (IP44 in surface mounting box)
FAQ
What is the difference between supervised and unsupervised modes?
In supervised mode, the M701E monitors the load wiring and external power supply, switching out load supervision and switching in the external power supply through a double pole relay. It raises fault conditions if the external power supply voltage falls below threshold. In unsupervised mode, the device provides neither load nor power supply supervision and simply switches a single form C set of changeover contacts.
What mounting options are available for the M701E?
The M701E can be mounted in a common wall box, on a DIN rail using integrated brackets built into the enclosure, or in its dedicated enclosure. The rotary address switch remains visible and accessible regardless of the mounting method chosen.
What is the relay contact rating for the M701E?
The M701E features form C changeover contacts rated at 2A at 30VDC for resistive loads in both normal and unsupervised modes.
Can the short circuit isolators be controlled individually?
Yes, while each module has built-in short circuit protection for the communications loop, the isolators can be selected or deselected on an individual module basis to increase application flexibility.
What protocols does the M701E support?
The M701E supports both CLIP and Advanced Protocol communication standards for integration with NOTIFIER fire alarm control panels.
What is the operating voltage range for the M701E?
The M701E operates on 15 to 32VDC with a maximum standby current of 160µA at 24VDC when not communicating.
Specifications
- Operating Voltage Range: 15 to 32VDC
- Maximum Standby Current: 160µA at 24VDC (no communications)
- Relay Specifications: Normal and unsupervised form C ratings 2A at 30VDC, resistive load
- Operating Temperature Range: -20°C to +60°C
- Humidity: 5 to 95% Relative Humidity (non-condensing)
- IP Rating: IP30 (IP44 in M200E–SMB)
- Height: 22 mm
- Length: 82 mm
- Width: 93 mm including terminal block
- Weight: 118 g
- Maximum Wire Gauge For Terminals: 2.5 mm²
- Protocol Support: CLIP and Advanced Protocol
- Mounting Options: Wall box, DIN rail, dedicated enclosure
- Approval: Intertek Approved
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 0.118 kg |
|---|---|
| Device Type | |
| Environment | |
| System Type | |
| Protocol |
