GST DI-9102E DI-9000E Series Addressable Optical Detector | Removable Sensing Chamber
£24.41 (inc VAT: £29.29)
Key features
- Two configurable smoke sensitivity levels
- Chamber contamination checking and reporting
- Local reed switch test activation
Downloads
Summary
The GST DI-9102E is an addressable optical smoke detector for general commercial fire detection, with a removable sensing chamber to make maintenance easier. It uses light scatter detection with a high performance optical chamber, which suits slow-burning and smouldering fires.
View full overview Show less
To keep service visits short, the detector checks its own chamber for contamination and reports it. Drift compensation holds sensitivity steady as conditions change, and a reed switch lets you trigger a local test at the device.
It runs on the GST digital loop protocol and works with the GST200N and GST-IFP4E control panels. It is loop-powered over a 2-wire loop, addressed electronically, and fits the common GST detector base with an output for a remote indicator.
Features
- Removable sensing chamber - the chamber comes out of the detector for servicing
- Two smoke sensitivity levels - configure the response to suit the environment
- Chamber contamination reporting - the detector checks its chamber and reports when it needs attention
- Drift compensation - sensitivity adapts as the environment changes over time
- Dark smoke recognition - the detection algorithm analyses optical smoke signals and recognises dark smoke quickly
- Reed switch test - activate a local test for quick maintenance checks
- Electronic addressing - guards against uncontrolled address changes
- 360 degree alarm LED - visible from any direction, with configurable polling LED support
- Remote indicator output - connect a remote indicator where the detector is out of sight
- Local event storage - the detector holds a log of 14 events
- Approvals - EN 54-7, BS 5839-1 compliant, CPR certified and LPCB marked
Specifications
| Detection Principle | Optical light scatter |
|---|---|
| Compatibility | GST DI-9000E systems; GST200N and GST-IFP4E control panels |
| Alarm Levels | 2 |
| Event Log | 14 events |
| Status Indication | LED |
| Connectivity | 2-wire loop and remote indicator |
| Addressing Method | Electronic |
| Power Supply Type | Loop powered |
| Operating Voltage | 16 to 28V DC (24V DC typical) |
| Quiescent Current | ≤800 μA |
| Alarm Current | ≤1.8 mA |
| Output Quantity | 1 |
| Remote Alarm Output | 2 mA |
| Dimensions | 100 x 44.5 mm (diameter x height) |
| Shipping Weight | Approx. 110 g |
| Colour | White (RAL 9016) |
| Mounting Type | Ceiling mount |
| Body Material | ABS |
| Operating Temperature | -10°C to +50°C |
| Relative Humidity | ≤95% non-condensing |
| Environment | Indoor |
| IP Rating | IP2x |
| Approvals | EN 54-7, BS 5839-1 compliant, CPR, LPCB marked, CE, REACH, RoHS, WEEE |
FAQ
It uses the GST digital loop protocol and is compatible with the GST200N and GST-IFP4E intelligent fire alarm control panels. It is for GST DI-9000E systems. All DI-9000E series detectors fit the common GST detector base. The base also allows a common remote indicator to be connected. It is a general application detector for places such as hotels, restaurants, offices, schools, banks, warehouses, libraries, computer rooms and switch rooms. The optical chamber suits slow burning and smouldering fires. It is for indoor use. The detector has a local reed switch test, so you can activate a test at the device. It also runs self-diagnostic testing and reports chamber contamination to help you plan maintenance. Addressing is electronic, which safeguards against uncontrolled address changes.Which control panels does the DI-9102E work with?
Which base does it fit?
Where is this detector suitable?
How do I test it on site?
How is the address set?
Downloads
- Datasheet (Adobe PDF)
Additional information
| Device Type | |
|---|---|
| Detection Type | |
| System Type | |
| Colour | |
| Environment |

