Shopping Basket

0 Items

Subtotal £0.00

Hochiki

Hochiki CHQ-AB ESP Addressable Beacon | High Intensity LED, Variable Flash Frequency

£28.23

SKU: ee445a1e770e

You may also need

  • Hochiki YBN-R/3 | ESP Sensor Mounting Base | Electronics-Free, Remote LED, Slim 8mm Profile - White

    Hochiki YBN-R/3

    SKU: YBN-R/3(WHT)

    In Stock

    £1.72 (inc VAT: £2.06)
    Add
  • Hochiki YBN-R/3 | ESP Sensor Mounting Base | Electronics-Free, Remote LED, Slim 8mm Profile - Ivory

    Hochiki YBN-R/3

    SKU: YBN-R/3

    In Stock

    £1.72 (inc VAT: £2.06)
    Add

Key features

  • Works with four different base types
  • Up to 127 devices per loop
  • Variable flash frequency on compatible panels

Downloads

Summary

The Hochiki CHQ-AB(BLU) is an addressable loop-powered beacon that fits directly onto the same base range as the Hochiki ESP sensor line, letting you mount it on a standard base, a base sounder, a base sounder beacon or a short-circuit isolator base without sourcing a different beacon for each role. That matters when you’re pricing a mixed-device install: one beacon covers several specification scenarios, cutting the number of part numbers you need to stock and order.

View full overview Show less

The blue lens gives you a clear way to visually separate this beacon’s alert from standard red units on sites running multiple alarm types, without changing how it’s wired, powered or commissioned. The casing matches the ESP sensor range in shape and colour, so it sits flush and consistent alongside detectors on the same ceiling run.

Power and addressing both come from the two-wire loop, and you set the device address on site using the Hand Held Programmer (TCH-B200), the same tool used across the ESP addressable range. The loop supports up to 127 devices in total, giving you headroom on larger layouts.

Features

  • Fits four base types – mount on the standard ESP base, base sounder, sounder beacon or short-circuit isolator base without changing the beacon itself
  • Loop-powered and addressable – draws power and commands from the same two-wire loop, reducing cable runs on site
  • Up to 127 devices per loop – gives you headroom for larger, mixed-device loops without extra wiring infrastructure
  • Variable flash frequency – adjust the flash pattern from a compatible control panel to suit the application
  • High intensity LED with Fresnel lens – produces a strong, highly visible flash for clear visual alerting
  • Blue lens for visual distinction – separates this beacon’s alert from standard red units on mixed-signal sites
  • Matches ESP sensor casing – keeps a consistent look across detectors, sounders and beacons on the same ceiling run
  • Quick on-site addressing – set the device address with the Hand Held Programmer (TCH-B200)
  • VdS approved – certified to VdS standard G206052

Specifications

Ordering CodesIvory case with Red lens CHQ-AB / White case with Red lens CHQ-AB(WHT) / Ivory case with Amber lens CHQ-AB(AMB) / White case with Amber lens CHQ-AB(AMB)WHT / Ivory case with Blue lens CHQ-AB(BLU)
Operating Voltage17-41 VDC
Quiescent Current240 μA typical (300 μA max)
Loop Current (When Polled)22 mA ±20%
Alarm Current4.3 mA typical (5.0 mA max)
Operating Temperature Range-10°C to +50°C
Storage Temperature Range-30°C to +60°C
Maximum Humidity95%RH non-condensing (at 40°C)
Weight88 g
Diameter / Height100 mm / 38 mm (46 mm with base)
Base Fixing Centres48 – 74 mm
ApprovalsVdS (G206052)

FAQ

Which bases can I fit this beacon to?

The CHQ-AB(BLU) fits the Standard ESP Base (YBN-R/3), the Base Sounders (CHQBS or YBO-BS), the Base Sounder Beacon (YBO-BSB) or the Short-Circuit Isolator Base (YBO-R/SCI). This gives you flexibility to combine beacon, sounder and isolator functions on the same footprint without sourcing a different unit for each role.


Do I need a separate power supply for this beacon?

No, the beacon is loop-powered, drawing its operating voltage (17-41 VDC) and alarm current (4.3 mA typical) directly from the fire loop. Check your loop budget against the quiescent current (240 μA typical) when sizing larger installations.


Will the variable flash frequency work with any control panel?

Variable flash frequency depends on the control panel it’s connected to, so confirm compatibility with your specific panel before relying on it. Where the panel doesn’t support the feature, the beacon still operates with its standard flash.


How do I address the beacon once it's installed?

Addressing is done with the Hochiki Hand Held Programmer (TCH-B200), which lets you set the device address on site during commissioning. It’s the same programmer used across the Hochiki ESP addressable range, so one tool covers the loop.


How many of these beacons can I put on one loop?

The loop supports up to 127 addressable devices in total, shared across all detectors, sounders and beacons connected to it, not 127 beacons exclusively. Plan your device count and cable lengths against your panel’s loop specification.


Is this beacon suitable for humid or outdoor locations?

It’s rated to 95%RH non-condensing at 40°C and an operating range of -10°C to +50°C, which suits most indoor commercial environments. For genuinely wet or outdoor locations, check the manufacturer’s full documentation, as this isn’t specified as an outdoor device.


Downloads

Additional information

Weight0.1 kg
Lens Colour

, ,

Colour

,

Device Type

Environment

Hazardous Applications

Marine Applications

Protocol

Short Circuit Isolator

System Type

Trade
Account
Enquiry?