Looking for a Testifire 1000 replacement or spare parts? Detector Testers moved UK orders for the 1000 range to equivalent Testifire XTR2 products from July 2024. Before ordering, separate three questions: which replacement kit you need, which parts keep your existing tester working, and which accessories can be used with XTR2.
Updated 9 November 2026: replacement references, listed spares and XTR2 compatibility information checked against Detector Testers’ product notice, current catalogue and user manual.
Jump to: replacement table | legacy spares | accessory compatibility | buying checklist | current products | FAQs
What happened to the Testifire 1000 range?
Detector Testers’ Testifire 1000 product update set out the change to XTR2 equivalents from 1 July 2024 in the UK and Germany, followed by Benelux and Nordic orders from 1 August 2024. This covers both individual tester packages and kits containing access poles.
Replacing the range does not make an existing tester’s condition or suitability a foregone conclusion. If you are maintaining a Testifire 1000, identify the fault and required part first; Detector Testers still provides a dedicated Testifire 1000 support page. A replacement consumable will not resolve every equipment fault.
Testifire 1000 to XTR2 replacement table
The old-to-new references below are those in Detector Testers’ replacement notice. Choose by the complete package, not just the head unit’s name. Current manufacturer kit pages confirm the pole-kit contents and advertised reach.
| Previous product code | XTR2 replacement | What to check before ordering |
|---|---|---|
| TESTIFIRE1001-001 | TESTIFIRE-XTR2-001 | Tester kit with XTR2 head, battery, charger kit, generator and smoke cartridge. Access poles are separate. |
| TESTIFIRE1000-001 | TESTIFIRE-XTR2-HEAD-001 | Head-only package. Check that you have the required XTR2 power and smoke-generation accessories. |
| TESTIFIRE6001-001 | TESTIFIRE-XTR2-6M-001 | 6 m test/removal kit: XTR2 kit, Solo 100 pole, Solo 200 removal tool and Solo 610 bag. |
| TESTIFIRE9001-001 | TESTIFIRE-XTR2-9M-001 | 9 m test/removal kit: adds three Solo 101 extensions to the Solo 100, removal tool and bag arrangement. |
| URBAN1001-1-001 | TESTIFIRE-XTR2-URBAN-001 | 5 m Urban kit: XTR2 kit, Solo 110, three Solo 111 extensions and Urban backpack/pole bag. |
Reach figures describe the manufacturer’s kit configurations, not the physical length of a single pole. Check the actual site access, pole instructions and working-at-height arrangements. Manufacturer references: standard kit, head only, 6 m kit, 9 m kit and Urban kit.
Are Testifire 1000 spare parts still available?
The replacement notice retained support for TS3 capsules and other accessories/spares. At this review, Detector Testers’ catalogue lists TS3 smoke capsules for the Testifire 1000 and 2000 ranges, plus the SPARE1048-001 inner cup. Its search listing explicitly identifies that cup for both legacy ranges.
These are specific listed examples, not a promise that every component remains stocked indefinitely. Check the part reference and current availability before ordering, particularly for repairs. See the maker’s TS3 capsule information and inner-cup listing, or shop our Testifire TS3 capsules.
Which accessories can you use with XTR2?
| Item | Verified distinction | Buying implication |
|---|---|---|
| Smoke consumables | TS3 is specified for Testifire 1000/2000. XTR2 uses TES3 cartridges. | Match the complete code. Order XTR2 TES3 cartridges for XTR2, rather than assuming old TS3 stock carries over. |
| Battery and charging equipment | The standard XTR2 kit lists TESTIFIRE-BP-001 lithium-ion battery and TESTIFIRE-CHAK-001 charger kit. | Do not assume your old battery batons or charger suit a head-only upgrade. Use the power equipment specified for XTR2. |
| Access poles | The XTR2 user manual specifies Solo access poles and excludes alternative poles. | Existing Solo poles may be reusable in the correct, serviceable configuration. Check the instructions; the manual limits use to three extension poles at once. |
| Cups, membranes and other spares | A legacy Testifire spare listing does not establish XTR2 compatibility. | Match the exact tester and spare reference instead of buying by appearance or the Testifire name alone. |
Check the maker’s TES3 information and the XTR2 user manual available under Product Attachments on its XTR2 kit page. The manual covers power equipment, consumables and pole use; use the instructions for your exact equipment.
XTR2 testing and DT Connect reporting
XTR2 provides smoke and heat testing and works with the DT Connect app. Detector Testers specifies an app connection and explains that full Premium reporting features require a subscription after the free trial; XTR2 remains usable without a subscription, with limited reporting features. Check current trial and plan terms when purchasing rather than relying on an older promotional offer.
For CO testing, distinguish the Testifire 2000 family from the smoke/heat 1000 and XTR2 packages. Detector Testers’ replacement notice specifically retains the 2000 for CO testing; do not treat XTR2 as a like-for-like CO replacement.
Replacement and spare-parts checklist
- Read the existing product code. Identify the 1000 head, complete kit or 2000 equipment before choosing a replacement.
- Decide whether you need a spare or a new tester. Use the manufacturer’s troubleshooting guidance for equipment faults.
- Match the test requirements. Confirm smoke, heat and any CO testing needs.
- Choose the package contents. Compare head-only, standard kit, 6 m, 9 m and Urban options.
- Check accessories individually. Include poles, battery, charger, generator, cartridge and any adaptors.
- Check the app and reporting requirements. Confirm device setup and current DT Connect plan terms before the first job.
- Confirm availability and site access. Check stock/lead time, safe reach and what your engineer needs for the planned work.
Shop legacy capsules or an XTR2 replacement
Keeping a Testifire 1000/2000 in service: choose the correct TS3 pack below. This is a consumable purchase, not a repair assessment.
Moving to XTR2: the standard kit includes the listed power and smoke accessories. The head-only product needs the appropriate supporting equipment; check the contents before ordering.
Testifire XTR2 Connected Smoke & Heat Detector Test Kit
SKU: TESTIFIRE-XTR2-001
View full product details
Testifire XTR2 Connected Smoke & Heat Detector Test Head Only
SKU: TESTIFIRE-XTR2-HEAD-001
View full product detailsTestifire 1000 replacement FAQs
What replaces TESTIFIRE1000-001?
Detector Testers maps it to TESTIFIRE-XTR2-HEAD-001. That is a head-only product. If you also need XTR2 power and smoke accessories, compare it with the standard TESTIFIRE-XTR2-001 kit.
What replaces Testifire 6001 and 9001 kits?
The manufacturer maps TESTIFIRE6001-001 to TESTIFIRE-XTR2-6M-001, and TESTIFIRE9001-001 to TESTIFIRE-XTR2-9M-001. Compare the supplied poles, removal tool and storage equipment before deciding whether you need a complete new kit.
Can I use TS3 smoke capsules in XTR2?
Use the specified TES3 cartridge for XTR2. TS3 capsules are listed for the legacy Testifire 1000 and 2000 ranges; the similar names do not make them the same consumable.
Can I keep my existing Solo poles?
The XTR2 manual specifies the Solo pole range. Check the condition and permitted configuration of your existing poles before reuse, including the limit of three extension poles. Do not substitute an alternative pole system.
Does replacing the 1000 mean replacing every spare immediately?
No blanket conclusion follows from the range change. TS3 capsules and specific legacy spares remain listed, while XTR2 has its own accessory requirements. Identify the exact equipment and part, then confirm suitability and availability.
Does XTR2 need an ongoing subscription?
Detector Testers distinguishes the required app connection from the Premium reporting subscription. After the trial, XTR2 can be used without a subscription with limited reporting features. Check current Premium terms for the reporting functions your business needs.
Unsure which package or spare you need? Contact Huvo with your existing tester code, required testing functions and access height so we can help identify the right buying option.
