Apollo

• Approved for use in the marine environment
• Five response modes for environmental adaptation
• Day/night switching for increased flexibility
• Drift compensation for false alarm reduction
• User programmability for data
• XPERT card addressing for increased security
• Ideal in environments that are dirty or smoky
• Unaffected by wind or atmospheric pressure
• Remote test feature

• Ideal for a wide range of applications.
• Enhanced false alarm management.
• Unaffected by wind or atmospheric pressure.
• Well suited to sensitive environments.
• Five EN54 approved response modes.
• Heat only and optical only options.
• Remote test feature.

• Responds well to slow-burning, smouldering fires
• Suitable for bedrooms and escape routes
• Unaffected by wind or atmospheric pressure
• Remote test feature
• Rejection of transient signals

• It is possible to set individual control of the sounder and visual indicator
• Volume and tone settings can be selected from the control panel
• Electronic bell tone
• IMO 1A tone included

• Up to 20 detectors or their equivalent load, may be installed between isolating bases
• High-brightness LED
• Detects wiring short-circuits
• Minimises disruption from short-circuits

The Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.

The Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.

• Enhanced reliability of smoke detection.
• Reduction in false alarms.
• Simple installation with a new easy-fit base and an isolator located in the head.
• PureLight® technology.
• A sleek and stylish low-profile or flush design.
• Compatible with XP95 & Discovery protocols.
• Comprehensively tested to exceed EN54 standards.
• Extensively tested at Apollo’s state of the art in-house testing facilities.

• Approved for use in marine environments
• Transient rejection for false alarm reduction
• Modern, low-profile design
• Responds well to fast-burning, flaming fires
• Good performance in both black and white smoke
• DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
• FasTest - a maintenance procedure that takes just four seconds to test detectors
• SensAlert - a yellow flashing LED indicates faulty operation
• High humidity tolerance at up to 90% RH
• Wider operating temperature -40°C to +70°C

• IP67 rated (suitable for installation outside)
• Compatible with XP95 or Discovery systems
• EN54-11 approved
• Optional version with isolator available
• E-Z fit connectors

• Approved for use in marine environments
• Transient rejection for false alarm reduction
• Modern, low-profile design
• Responds well to slow-burning fires
• Good performance in both black and white smoke
• DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
• FasTest - a maintenance procedure that takes just four seconds to test detectors
• SensAlert - a yellow flashing LED indicates faulty operation
• High humidity tolerance at up to 90% RH
• Wide operating temperature -40°C to +70°C

• Approved for use in the marine environment
• Five response modes for environmental adaptation
• Day/night switching for increased flexibility
• Drift compensation for false alarm reduction
• User programmability for data
• XPERT card addressing for increased security
• Responds well to fast-burning, flaming fires
• Designed to operate in a variety of environments
• Remote test feature
• Rejection of transient signals

• Wide operating voltage range 9V to 33V
• Multiple temperature variants for different applications
• Dual thermistor network with rate of rise detection

• Can be used for applications where smoke detectors are unsuitable
• Two types available; fixed heat (CS) or rate-of-rise (A1R)

• Intrinsically safe for use in hazardous areas
• IP67 rated for indoor and outdoor applications
• Rapid alarm reporting in less than 0.2 seconds

• Responds well to slow-burning, smouldering fires
• Well suited for bedrooms and escape routes

• Photo-electric detection for smouldering fires
• Two-wire polarity insensitive supply
• Operating range -20°C to +60°C

• Photo-electric detection ideal for slow burning and smouldering fires
• Five EN54 approved response modes for flexible sensitivity settings
• Digital communication compatible with Discovery, XP95 and CoreProtocol systems

• Responds Well to Slow Burining Smouldering Fires
• 360 Degree Visibility of LED's
• Reduces False Alarms
• Quick Simple Installation

• Low profile design
• Utilises digital CoreProtocol communications
• Compatible with Discovery and XP95 systems*
• Integrated switchable isolator as standard

• Standard AlarmSense base
• Detects the removal of a detector head and reports a fault

• Flashing LED option to indicate polling (Discovery systems only)
• ‘Plug and Play’ terminal connections for fast wiring
• Continuity link for wiring test before commissioning
• Reports an alarm in under 0.2 seconds
• Resettable element

• Plug and Play’ terminal connections for fast wiring
• Continuity link for wiring test before commissioning
• Reports an alarm in under 0.2 seconds
• Resettable element

• Resettable operating element.
• Easy access, front reset mechanism.
• Suitable for semi-flush or surface mounting.