Apollo

• For use on an XP95/Discovery systems.
• Sound output of 85dB(A) at 1 metre.
• Current consumption of only 3mA.
• Loop-powered.
• Responds to signals from the associated detector – does not have an address of its own.

• Blanking cap for XP95 sounder or combined sounder & flasher bases.
• Suitable for applications where no detector is required.
• Available in either red or white.

• Two independent isolators in one DIN-rail housing
• Loop-powered with visual LED fault indication
• Supports up to 20 XP95 detectors between isolators

• It can report fault, switch open and switch closed levels
• Three visible LEDs
• Capable of switching up to 8A at 250V AC
• Fits a standard 35mm DIN-Rail

• Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
• May be synchronised with loop sounders
• An opto-coupled input is provided to monitor the state of the external power supply
• Features group addressing
• Will accept a load of up to 5A

• Universal XPERT card addressing
• One-way fit design
• Only accepts intrinsically safe detectors

The Apollo XP95 Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.

Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.

The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.

• Patented short-circuit detection technology
• Automatic restoration when fault cleared
• Compatible with XP95, Discovery and CoreProtocol systems

This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.

• XPERT Addressing.
• One way fit of detector.
• Locking feature to prevent unauthorised detector removal.

• Twin switch montor for Apollo intelligent systems.
• Improved design for ease of wiring meaning faster installation.
• Contains controllable isolator.
• Address range 1 - 254.
• Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems.

The XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.

• Uses high intensity LED.
• EN 54-23 Compliant Category C VAD.
• Flash rate 0.5Hz.
• Fault signal if LED check failed.

• Visual indicator flash rate of once per second
• Synchronisation of visual indicator flash
• Individual and group addressing
• Unique visual indicator self-test
• Loop-powered
• Built-in Isolator

Enter a brief description of your product here. This description will be displayed on product list pages.

• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of ‘alert’ and ‘evacuate’ tones.
• Individual & group addressing.
• Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.

• Choice of tones on standard device: Apollo, Slow Whoop and DIN.
• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of 'alert' and 'evacuate' tones.

• Simplifies and speeds up installation and commissioning.
• Uses patented proven technology.
• Address remains the same, no matter how often detectors are replaced.
• Flexibility to create any address.

• The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.
• Allows sounders to be operated continuously or be pulsed; 1 second on, 1 second off
• May be synchronised with loop sounders

A universal address card supplied with all bases. Using a coding guide, pips are removed to set the address of the inserted detector.

• Designed to monitor one or more Single Pole Volt Free Contacts and report the status
• 4 Input States
• Two Visable LED's
• Loop Powered

• EN 54-23 Certified Category O VAD
• 0.5Hz Flash Rate (white)
• Synchronisation of VAD flash
• Individual & group addressing
• Unique VAD self-test
• Loop-powered
• Built-in isolator