Fyreye Common Base
The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.
Filters
Fyreye Deep Common Base
Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.
Fyreye Diode Base
The Fyreye diode base is used on systems that do need line integrity on head removal. This would include all conventional systems that mix detectors & call points on the same line.
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.
System Type Addressable
Fyreye MKII Diode Base
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
Fyreye MKII Diode Base in Black
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
Fyreye MKII Isolator Base
Enter a brief description of your product here. This description will be displayed on product list pages.
System Type Addressable
Fyreye Relay Base
The Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
System Type Addressable
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
System Type Conventional
Complete the setup
Hand-picked accessories for this item
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
System Type Conventional
Hochiki CDX Conventional Mounting Base
- Integral remote indicator output
- Low profile, only 8 mm
- Rugged design and electronics free
System Type Conventional
Colour White, Black, Ivory
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
System Type Conventional
Colour White, Ivory
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
System Type 2-Wire
Colour White, Ivory
Hochiki DIN Mounting Box Small or Large
- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
System Type Addressable
Size Up to 4 DIN Rail Modules, Up to 6 DIN Rail Modules
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
System Type Addressable
Colour White, Ivory
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
System Type Addressable
Complete the setup
Hand-picked accessories for this item
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
System Type Conventional
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
System Type Conventional
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
Colour White, Ivory
Nittan Evolution Detector Mounting Base
- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
System Type Addressable
Nittan Evolution Detector Mounting Base with SCI Shorting Link
- Includes a shorting link to allow loop continuity testing
- Allows for ease of installation cable testing
- Low profile
System Type Addressable
Nittan Evolution Detector Mounting Base With Short Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
System Type Addressable
Nittan Evolution DIN Rail Mounting Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
System Type Addressable