Nittan Evolution H2 Addressable Heat Detector with Short Circuit Isolator
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
- Evolution FSK protocol
- EEPROM addressed with programmer
Detector
Filters
Nittan Evolution PY Addressable Optical Smoke Detector with Short Circuit Isolator
- Integral -ve short circuit isolator
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector
- Replaces EV-PH from September 2024
- Orange optic LED and PY type Chamber
- 3 sensitivity settings
- Heat category A1R
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector with Short Circuit Isolator
- Orange optic LED and PY type chamber
- 5 sensitivity settings
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
Hochiki ACD-EN Addressable Multi-Sensor | Smoke, Heat & CO Detector
- 24 EN54-approved operational modes combining smoke, heat, CO and COHb detection
- SMART algorithm for reduced false alarms with automatic environmental adaptation
- Up to 10-year CO cell life with full monitoring and end-of-life warnings
Hochiki ESP Addressable Weatherproof Heat Detector
- IP67 rated for external use
- Dual heat detection elements (fixed temperature and rate of rise)
- ESP analogue addressable protocol
ESP FIREbeam XTRA Analogue Addressable Beam Smoke Detector
- 7-70 m standard detection range
- Extensions kits available to enhance detection range up to 160m
- Fully compatible with the Hochiki ESP analogue addressable protocol
Black Infinity ID2 Detector With Optional Integral Sounder
- Black plastic moulding to meet aesthetical requirements
- All available with optional integral sounder
- 4 types of detector available
Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
Twinflex ASD Detector with Optional Sounder in Black
- Twinflex ASD detector in black plastic moulding
- Available as detector only or with integral sounder
- 6 selectable modes of detection
AlarmSense Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
AlarmSense AlarmSense Heat Detector
- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
Apollo Alarmsense Integrating Optical Smoke Detector
- Responds Well to Slow Burining Smouldering Fires
- 360 Degree Visibility of LED's
- Reduces False Alarms
- Quick Simple Installation
Eaton BiWire Ultra 5 in 1 Detector
- DIL-Switch Mode Selection
- Non-Latching Mode for HMO Use
- 15m Optical Range
- 2 Core Wiring
Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional
- Photo-electric detection for smouldering fires
- Two-wire polarity insensitive supply
- Operating range -20°C to +60°C
Apollo Series 65 Conventional Heat Detector
- Wide operating voltage range 9V to 33V
- Multiple temperature variants for different applications
- Dual thermistor network with rate of rise detection
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.
Apollo Discovery 58000-300 Carbon Monoxide Detector
- Early warnign of carbon based smouldering fires.
- Resistance to false alarms in areas with high levels of steam and other airborne particles.
- Ideal for protecting small volume sleeping risk areas.
- Resitance to contamination in dirty and dusty conditions.
- Excellent supplement to fire detection systems to improve detection of smouldering hydrocarbon fires.
Apollo Discovery Heat Detector
- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
Apollo 58000-700 | Discovery Multisensor Detector | Optical Smoke & Heat
- Five EN54 approved response modes for customised fire detection
- Combined optical smoke and thermistor heat sensors with separate outputs
- Wide operating temperature range: -40°C to +70°C
Apollo Discovery Optical Smoke Detector
- Photo-electric detection ideal for slow burning and smouldering fires
- Five EN54 approved response modes for flexible sensitivity settings
- Digital communication compatible with Discovery, XP95 and CoreProtocol systems