CAST Compact Wall Sounder & White VAD
- LPCB certified to EN54-3, 17 & 23
- Provides W-3-3.1 light distribution when wall mounted
- Impressive 96dB(A) sound output
White
Filters
CAST Compact Ceiling Sounder & White VAD
- LPCB certified to EN54-3, 17 & 23
- Provides C-3-8 light distribution when ceiling mounted
- Impressive 96dB(A) sound output
CAST Compact Wall White VAD
- LPCB certified to EN54-17 & 23
- Group addressing for simultaneous operation of multiple devices
- Onboard short-circuit loop isolator
CAST Compact Ceiling White VAD
- LPCB certified to EN54-17 & 23
- Group addressing for simultaneous operation of multiple devices
- Onboard short-circuit loop isolator
Apollo XP95 Sounder VAD Base
- EN54-23 compliant VAD with built-in isolator
- Two adjustable volume ranges 55–91dB(A)
- Unique acoustic and VAD self-test capability
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
Hochiki YBO-BSB2 ESP Addressable Base Sounder Beacon
- Hochiki ESP combined base sounder & VAD beacon.
- Variable Sound Output 50 ~ 98 dB(A) output at 1 metre.
- 'O' Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with White or Ivory case.
Apollo Discovery Base Sounder Visual Indicator
- Simple installation
- Adjustable tone and volume
- Built-in isolator
Hochiki CHQ-WSB2 ESP Addressable Wall Sounder Beacon in Red or White
- Single Loop Address - addressed via the TCH-B200 Hand Held Programmer.
- Variable Sound Output 90 ~ 102 dB(A) (±2 dB(A)) output at 1 metre.
- Sounder and Beacon can operated independently*1.
- ‘O’ Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with Red or White case.
- Weatherproof Kit available.
Hochiki CHQ-WB Addressable Loop Powered Wall Beacon VAD
- Wall mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
Hochiki CHQ-CB Addressable Loop Powered Ceiling VAD
- Ceiling mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
Gent S-Quad Addressable Detector with Voice & VAD Beacon
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
Nexus Pulse EN Certified High Output Sounder & VAD Beacon
- High output of 105 or 110dB (depeding upon version)
- Conforms to EN54-23
- White or Red flash versions available
- Synchronised Flash
Nittan Evolution High Output Beacon
- High output beacon
- IP65 waterproof rating
- Integral short circuit isolator
Nittan Evolution High Output Sounder Beacon
- High output sounder beacon
- IP65 waterproof rating
- Integral short circuit isolator
SmartCell Wireless Dual Smoke & Heat Detector with Sounder & Beacon VAD
- Flexible detection; smoke and/or heat
- Integral sounder (32 tones) & beacon VAD (part 23)
- Unique design
- Inbuilt locking mechanism
SmartCell Wireless Sounder with Beacon VAD
- Quick and easy to install
- 32 sounder tones
- Part 23 ceiling or wall VAD
- Unique design
- Inbuilt locking mechanism
Solista LX - Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs