No

• Low current LED beacon.
• Simple ‘First Fix’ installation.
• Weatherproof to IP65 (deep base units).
• Choice of lens colours.
• Sounder and beacon can be controlled separately.
• Tone and volume can be preset or adjusted off-base - 20dB.
• Separate connections for sounder & beacon.

• Wide voltage range.
• Simple ‘First Fix’ installation.
• 32 tones.
• Tone and volume can be preset or adjusted off-base.
• Weatherproof to IP65 (deep base units).
• Synchronised alarm tones.
• Volume control - 20dB.

• High output 5J xenon beacon
• 10-60V DC or 110/230V AC
• Simple ‘First Fix’ installation

• High efficiency LED beacon consumes less than 5mA.
• Simple ‘First Fix’ installation (no second fix wiring).
• Weatherproof to IP65 (deep base units).
• Synchronised flash.

• For use with XP95 & Discovery systems
• Self-test fault monitoring
• IP65 rated
• Individual and group addressing
• Sycronisation of flashes
• Comes with Isolating Base as standard
• Loop-powered
• Red and clear lens options

• Ceiling mounted Visual Alarm Device
• Conforms to EN54-23
• White or Red flash versions available
• Available with optional Sounder
• Synchronised Flash

• EN54-23 VAD
• White or Red flash versions available
• Synchronised Flash

• EN54-23 VAD
• White or Red flash versions available
• Includes integral sounder

• Utilises market-leading bell design
• Ultra bright strobe in clear lens for maximum light output
• Single point of installation minimises wiring and associated costs

• Low profile (26mm)
• Low Current consumption (100 µA)
• Up to 99 isolators per loop

• System Sensor addressble sensor base with SEMS screw connections and address identification label.

• Addressable base sounder for System Sensor protocol.
• Available with optional short-circuit isolator.

• High output LED technology ensures optimum light output and low power requirements.
• High efficiency piezo disk and horn profile generate powerful sound output.
• Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
• Automatic synchronization of sounder and strobe
• Large cable access
• Rear or surface cable entry
• Loop continuity spring
• Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
• Anti-tamper feature
• In-built isolation options
• Address tag for clear indication
• Single point of installation – saves time, cost & inventory
• Low current draw enables more devices on loop
• Adjustable volume control (on device or from panel)
• Rotary wheels for clear address indication
• Clear lens with red flash

• Slimmest profile in the industry
• 32 user-selectable tones
• EN 54-3 tested and fully approved

• Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
• White flash(C-2.4-8), red flash (C-2.4-7) options available.
• 32 selectable tones.
• Body colour options available – red or white.
• Deep base variants independently certified to IP65.

• Loop powered, no separate power supply run needed
• Synchronised flash rates with other Apollo Protocol devices
• Fault signal raised if LED self-check fails

• Compatible with Soteria, Discovery and XP95 detectors
• Isolated and non-isolated devices supported
• ‘E-Z Fit’ allows for simple mounting of the detector base

• Complies with EN54 Part 3 Type A
• 102dB @ 1m sound output
• 22 Tone patterns (site selectable)
• Flush or surface fixing
• Housed in UL V0 flame retardant ABS
• 4 x 20mm cable entries (2 top, 2 bottom)
• First fix, wire to back box technology
• Flashing Rate 0.5Hz

• Stainless steel wiring contacts
• Square cable clamp termination
• Fixing centres 48 to 74mm

• Electronics-free base design
• Stainless steel wiring contacts
• Takes 2.5 mm² cables

• Features short circuit isolator
• Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
• Available in Red or White

The CSB sounder base has been designed to achieve a higher number of units to be accomodated on the loop.  A maximum of 64 units are now loop powered accross the whole range of Zeta Analogue Addressable panels.

• Low consumption conventional beacon
• Low profile platform design which can be used standalone or with a detector