No

• High output 230V AC siren
• Up to 127 dB
• Available with either 12V trigger
• IP rated for both indoor and outdoor use

• Detector locking mechanism
• One way fit
• Contains an earth connector
• Easy to wire
• Contains no electrical parts
• Terminal for remote indicator

• High output
• 16 selectable alarm tones
• Volume control
• Backwards compatible with Zeta Standard Protocol (link)

• High output of 105 or 110dB (depeding upon version)
• Conforms to EN54-23
• White or Red flash versions available
• Synchronised Flash

• Universal mounting base for Nittan Evolution range.
• Optional deeper version for surface cable.

• Includes a shorting link to allow loop continuity testing
• Allows for ease of installation cable testing
• Low profile

• Low Profile Base design.
• -ve Line Isolator.
• Low quiescent current.
• Self resetting when fault clears.

• Low Profile Base design.
• -ve Line Isolator.
• Low quiescent current.
• Self resetting when fault clears.

• Available as Standalone Sounder Beacon or Sounder Beacon Base
• Evolution FSK Protocol.
• EEPROM Addressed (Programmer)
• 12 Tones DIP Switch Selected (3 Approved Tones)

• Beacon with integral base
• Non addressed

• Available as standalone sounder or sounder base
• 12 tones DIP switch selected (3 approved tones)
• Replaces EV-ABS sounder

• High output beacon
• IP65 waterproof rating
• Integral short circuit isolator

• High output sounder
• IP65 waterproof rating
• Integral short circuit isolator

• High output sounder beacon
• IP65 waterproof rating
• Integral short circuit isolator

• Nittan 4 Terminal Standard Detector Base.
• Low Profile Detector Base.

• Wide range of heat detector classes for various conditions
• Rate-of-rise and static temperature detection capabilities
• Open-web casing for improved air flow and temperature measurement

• Responds well to fast-burning, flaming fires
• Transient rejection algorithms reduce false alarms
• Automatic drift compensation with DirtAlert™

• Facilitates continuity testing for enhanced reliability
• Quick and efficient installation process
• Compatible with Orbis fire detection systems

Rotary Fire Alarm Bell

With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.

• Suitable for internal and external use
• Sound output: 60dB at up to 35m
• Quick and simple to install

Sita Addressable Weatherproof Strobe (no sounder)

• Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
• LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
• Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
• Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
• Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
• Wide input voltage range leads to flexibility in system design.
• Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
• Soft start up means no current peak at start up, thus reducing circuit loading.
• New connection layout creates easier wiring and connection on installation.
• Locking Bases to prevent easy removal of device.

• Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
• LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
• Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
• Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
• Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
• Wide input voltage range leads to flexibility in system design.
• Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
• Soft start up means no current peak at start up, thus reducing circuit loading.
• New connection layout creates easier wiring and connection on installation.
• Locking Bases to prevent easy removal of device.