No

• EN 54-23 Certified Category O VAD
• 0.5Hz Flash Rate (white)
• Synchronisation of VAD flash
• Individual & group addressing
• Unique VAD self-test
• Loop-powered
• Built-in isolator

• Easily fitted within or on control cabinets.
• Easily fitted to most surfaces.
• Can be used in exposed locations.

• 32 User selectable Tones
• IP45 and IP65 Versions
• 3 Colour Options

• Ultra-efficient LEDs.
• Very low current consumption.
• Sleek, low-profile design.
• Compatible with other Excel Sounders and Sounder Beacons and accessories.
• Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.

• IP66 or weathproof rated (Deep Base option only)
• Very low consumption conventional sounder/flasher
• Easy to install
• Choice of 3 volume levels

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

• Manual call point for the Infinity ID2 system
• Indoor or outdoor (IP67) version available
• Visible warning flag confirms activation

• Compatible with all MKII range of detectors
• 3 different types of base available

• Indoor call point compatible with Zeta addressable panels
• Supplied with backbox for surface mount installations (optional flush mount bezel available)
• Very high visibility of the alarm condition

• Sandwich design between base and detector
• 16 selectable international alarm tones
• Individual or group triggering capability

• Indoor MKII addressable sounder compatible with Zeta control panels
• 102dB @ 1m sound output
• Available in Red or White

• Combined sounder and VAD in single unit
• 100dB sound output at 1 metre
• Hard or soft addressable capability

• IP65 weatherproof sounder
• 16 Tone patterns (site selectable)
• Available in red or white

• IP65 weatherproof sounder/beacon
• Flashing rate 0.33Hz - 1.5Hz
• Available in red or white

• Third-party certified to EN54-3 (Sounders)
• Impressive 96dB(A) sound output @ 1m
• 31 selectable primary and secondary tone pairs and two volume levels (high and low)
• Alarm Current at 30Vdc = 5.5mA
• Alarm Current at 18Vdc = 3.8mA
• Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
• Supplied with a BF431QCP quick connect plate and detector spur wires
• IP21C rated

• Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
• Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
• Impressive 96dB(A) sound output @ 1m
• Includes 31 selectable primary tones and an optional secondary tone
• Two volume levels (high and low)
• Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
• Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
• Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
• Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
• Supplied with a BF431QCP quick connect plate and detector spur wires
• IP21C rated

• Impressive 96dB(A) sound output @ 1m.
• Supplied with a BF431QCP quick connect plate and detector spur wires.
• Onboard short-circuit loop isolator.

• The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
• It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
• The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator

• Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
  • Impressive 103dB(A) sound output @ 1m
• Onboard short-circuit loop isolator
• 550µA quiescent current./li>
• 5mA alarm current @24V DC (sounder on max)
• Group addressing facility allows multiple devices to be operated simultaneously
• 7 selectable volume levels and up to 15 selectable tone pairs
• IP21C (Type A) rated.

• Cable termination: 5-2.5mm 2
• Maximum voltage: 30Vd.c
• Current rating: 2 Amps
• IP rating: IP24D
• Material: PC/ABS
• Weight: 160g
• Dimensions: 89x93x59mm
• Colour: Red

• Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
• Rugged design with ATEX classification
• SIL Level 2 approved variant available

• Permanently fitted gong.
• Specifically designed weatherproof back box.
• Slick and modern looking.
• Fully customised pad printed branding.
• Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.

• Complies with EN54 Pt 3 Type B & EN54 Pt 23.
• 107dB +/- 3dB @ 1m sound output.
• 22 Tone patterns (site selectable).
• Suitable for surface mounting only.
• Housed in UL V0 flame retardant ABS.
• 3 x 20mm cable entries (2 top, 1 bottom).
• First fix, wire to back box technology.
• IP65 Rating.
• Flashing rate 0.5Hz