Shopping Basket

0 Items

Subtotal £0.00

GST

GST DI-9102E DI-9000E Series Addressable Optical Detector | Removable Sensing Chamber

£24.41 (inc VAT: £29.29)

Low Stock

SKU: DI-9102E Category: Brand:

Key features

  • Two configurable smoke sensitivity levels
  • Chamber contamination checking and reporting
  • Local reed switch test activation

Downloads

Summary

The GST DI-9102E is an addressable optical smoke detector for general commercial fire detection, with a removable sensing chamber to make maintenance easier. It uses light scatter detection with a high performance optical chamber, which suits slow-burning and smouldering fires.

View full overview Show less

To keep service visits short, the detector checks its own chamber for contamination and reports it. Drift compensation holds sensitivity steady as conditions change, and a reed switch lets you trigger a local test at the device.

It runs on the GST digital loop protocol and works with the GST200N and GST-IFP4E control panels. It is loop-powered over a 2-wire loop, addressed electronically, and fits the common GST detector base with an output for a remote indicator.

Features

  • Removable sensing chamber - the chamber comes out of the detector for servicing
  • Two smoke sensitivity levels - configure the response to suit the environment
  • Chamber contamination reporting - the detector checks its chamber and reports when it needs attention
  • Drift compensation - sensitivity adapts as the environment changes over time
  • Dark smoke recognition - the detection algorithm analyses optical smoke signals and recognises dark smoke quickly
  • Reed switch test - activate a local test for quick maintenance checks
  • Electronic addressing - guards against uncontrolled address changes
  • 360 degree alarm LED - visible from any direction, with configurable polling LED support
  • Remote indicator output - connect a remote indicator where the detector is out of sight
  • Local event storage - the detector holds a log of 14 events
  • Approvals - EN 54-7, BS 5839-1 compliant, CPR certified and LPCB marked

Specifications

Detection PrincipleOptical light scatter
CompatibilityGST DI-9000E systems; GST200N and GST-IFP4E control panels
Alarm Levels2
Event Log14 events
Status IndicationLED
Connectivity2-wire loop and remote indicator
Addressing MethodElectronic
Power Supply TypeLoop powered
Operating Voltage16 to 28V DC (24V DC typical)
Quiescent Current≤800 μA
Alarm Current≤1.8 mA
Output Quantity1
Remote Alarm Output2 mA
Dimensions100 x 44.5 mm (diameter x height)
Shipping WeightApprox. 110 g
ColourWhite (RAL 9016)
Mounting TypeCeiling mount
Body MaterialABS
Operating Temperature-10°C to +50°C
Relative Humidity≤95% non-condensing
EnvironmentIndoor
IP RatingIP2x
ApprovalsEN 54-7, BS 5839-1 compliant, CPR, LPCB marked, CE, REACH, RoHS, WEEE

FAQ

Which control panels does the DI-9102E work with?

It uses the GST digital loop protocol and is compatible with the GST200N and GST-IFP4E intelligent fire alarm control panels. It is for GST DI-9000E systems.


Which base does it fit?

All DI-9000E series detectors fit the common GST detector base. The base also allows a common remote indicator to be connected.


Where is this detector suitable?

It is a general application detector for places such as hotels, restaurants, offices, schools, banks, warehouses, libraries, computer rooms and switch rooms. The optical chamber suits slow burning and smouldering fires. It is for indoor use.


How do I test it on site?

The detector has a local reed switch test, so you can activate a test at the device. It also runs self-diagnostic testing and reports chamber contamination to help you plan maintenance.


How is the address set?

Addressing is electronic, which safeguards against uncontrolled address changes.


Downloads

Additional information

Device Type

Detection Type

System Type

Colour

Environment

Trade
Account
Enquiry?