Kidde Commercial KE-DB3010B | Addressable Detector Base | First-Fix Ready, Twist-Lock Action
£7.64 (inc VAT: £9.17)
Summary
The Kidde Commercial KE-DB3010B is a graphite black first-fix base built for installers who need to get Excellence series detectors on and off the ceiling quickly, without rewiring every time a detector is swapped or replaced. Fit the base early in the containment programme, wire it in, and leave the detector head until final fix - a real time-saver on multi-phase commercial projects.
Isolation bridges built into the base let you carry out loop continuity checks before a single detector head is installed, so cabling faults get caught early rather than at handover. Colour coded, captive-screw terminals and a cable cut-length template reduce wiring errors on site, while keyhole fixing slots and generous cable entry points cut down on second-fix headaches.
Once detectors are in place, the twist-and-lock action gives you audible and visual confirmation of a proper fit, and a selectable locking mechanism protects against unauthorised removal on sites where tampering is a concern. Pair it with any Kidde Excellence series point detector for a straightforward, low-fuss install.
For dust and steam prone areas, the KE-DP3021B detector head fits this base directly.
Features
- Isolation bridges - allow you to test loop continuity before any detector heads are fitted, catching wiring faults early
- Selectable locking mechanism - keeps unauthorised hands off the detector, with release only possible using a dedicated tool
- Dual address tag locations - let you place the label wherever it stays visible, regardless of how the base sits on the ceiling
- Large rear and multiple side cable entries - give you flexible routing options without needing extra fixtures
- Colour coded, captive-screw terminals - speed up correct wiring and reduce the chance of miswiring on site
- Cable cut-length template - built into the base to help you strip cables to the right length first time
- Insert and lock position indicators - combine with audible clip feedback so you know instantly the detector is seated correctly
- Dual contact points per connector - give a more reliable electrical connection between detector and base
FAQ
Which detectors is the KE-DB3010B compatible with?
It’s designed for the Kidde Commercial Excellence series point detectors, including the KE-DP3021B, KE-DP3121B and KE-DP3121B-SNV. Any Excellence series detector head should insert and lock using the same twist action.
Can I test the loop wiring before the detectors are installed?
Yes. The base includes isolation bridges that maintain loop continuity when no detector is fitted, so you can carry out cable testing during first-fix and still keep continuity if a detector is later removed for maintenance.
What cable sizes does the base terminal accept?
The terminals take cable from 1 to 2.5mm diameter (0.8 to 5.2mm², AWG 18 to 10), with 2 cores per cable. Terminals are colour coded and use captive clamping washers to make correct termination straightforward.
How does the anti-tamper locking mechanism work?
A selectable locking mechanism can be activated on the detector to stop it being pulled from the base by hand. Once locked, the detector can only be released using a dedicated tool, which is useful on sites where tampering or accidental removal is a risk.
Is this base suitable for outdoor or exposed locations?
No. The KE-DB3010B is rated for indoor use only, with an operating range of -10°C to +65°C and 10-93% non-condensing humidity, and it is not vandal proof. For exposed or high-risk areas, check with the manufacturer for a suitable alternative.
Does the base support a remote indicator?
Yes, the base includes RI+ and RI- terminals for remote indicator connection, and it’s listed as compatible with the AI673 and PA25/3L conventional remote indicators.
Specifications
General
| Compatibility | Kidde Commercial Excellence series point detectors |
|---|---|
| Connectivity | 2-wire loop, earth & remote indicator |
Electrical
| Cable Specification | 1 to 2.5 mm Ø / 0.8 to 5.2 mm² / AWG 18 to 10 |
|---|---|
| No. Of Cable Cores | 2 |
| Terminals | 7 (A+, A-, B+, B-, Screen, RI+, RI-) |
Physical
| Physical Dimensions | 100 x 17 mm (Ø x H) |
|---|---|
| Net Weight | 55 g |
| Colour | Graphite black (RAL 9011) |
| Mounting Type | Ceiling mount |
| Cable Entries | 5 side, 1 rear |
| Material (Body) | Polycarbonate |
Environmental
| Vandal Proof | No |
|---|---|
| Operating Temperature | -10 to +65°C |
| Storage Temperature | -30 to +75°C |
| Relative Humidity | 10 to 93% noncondensing |
| Environment | Indoor |
Regulatory
| Compliancy | CE, REACH, RoHS 3, WEEE |
|---|---|
| Certification | CE |
Downloads
- Datasheet (Adobe PDF)
Additional information
| System Type | |
|---|---|
| Colour | |
| Mounting | Ceiling |
Related Products
More products from Kidde Commercial
Kidde Commercial KE-DB3010W | Intelligent Addressable Base | Twist-and-Lock Fitting
£2.97 (inc VAT: £3.56)
Kidde Commercial KE-DBA-AUXW | Intelligent Addressable Deep Base | 5 Cable Entries, Dual Tag Locations
£3.16 (inc VAT: £3.79)
Kidde Commercial KE-DP3020W | Addressable Dual Optical Smoke Detector | Dual Wavelength Discrimination, Tri-Colour Status LED, IP20
£25.78 (inc VAT: £30.94)
Kidde Commercial KE-DP3021B | Addressable Dual Optical Heat Detector | Dust & Steam Discrimination
£44.48 (inc VAT: £53.38)