Salamander Wireless Fire Door System | Controller Unit
£211.30 (inc VAT: £253.56)
Summary
The Geofire Salamander Controller (Part No. 3-80-0012) is the central hub of the Salamander wireless fire safety system, providing intelligent management and control of radio-connected fire door closers, holders, and ZleepSafe devices. This innovative controller enables buildings to maintain fire doors in the open position for ease of access and ventilation, whilst ensuring they close automatically and safely in the event of a fire alarm activation.
Designed as a cost-effective, wire-free solution, the Salamander Controller connects seamlessly to existing fire alarm systems via 24Vdc signal or volt-free relay contacts. Operating on the license-exempt 868MHz frequency band, the controller can manage up to 99 door closers or door holders and an unlimited number of ZleepSafe devices, making it suitable for installations of all sizes from single buildings to large multi-site complexes.
The controller features comprehensive fault monitoring with automatic 2-hour status checks of all connected devices, LED indicators for system status, low battery warnings, and signal strength monitoring. With 230Vac mains supply and 6-hour battery backup, the Salamander Controller ensures continuous protection even during power outages. The system complies with BS7273-4 Critical Actuation (Category A) requirements and is CE marked under the Construction Products Regulation, delivering a safe, legal, and fully compliant fire safety solution.
Features
- Central wireless controller for Salamander fire safety system
- Connects to existing fire alarm systems via 24Vdc or volt-free contacts
- Manages up to 99 door closers or door holders per controller
- Supports unlimited number of ZleepSafe devices
- 868MHz radio frequency operation to European standard (license exempt)
- Typical radio range of 40-50m (site specific)
- Range extendable up to 8 times with additional booster units
- 14 available radio channels with automatic ‘quiet’ channel scanning
- Very low duty cycle RF interface for minimal interference
- Automatic 2-hour status check of all connected devices
- Fail-safe release on fire, fault, low battery, or communications failure
- LED display indicates system working, low battery, low signal, and unit number
- 230Vac 50Hz mains supply with 6-hour battery backup
- Fire and fault response interface for system integration
- Wire-free installation saves time, cost, and disruption
- Compatible with existing Salamander installations
- Suitable for Critical Actuation (Category A) to BS7273-4
- CE marked under Construction Products Regulation
- EISI EN 300 220 compliant (license exempt)
- Compact wall-mounted design (196 x 280 x 42mm)
FAQs
How many devices can one Salamander Controller manage?
A single Salamander Controller can manage up to 99 door closers or door holders, plus an unlimited number of ZleepSafe devices. This makes it suitable for installations ranging from small buildings with just a few fire doors to large facilities requiring extensive fire door management across multiple floors or areas.
What is the radio range of the controller and can it be extended?
The typical radio range is 40-50m, though this is site-specific and can vary based on building construction, obstructions, and interference. The range can be extended by up to 8 times using additional Salamander Booster units (Part No. 3-80-0014). The exact specification for your installation can be verified by conducting a site survey.
How does the controller connect to my existing fire alarm system?
The Salamander Controller interfaces with your fire alarm system via either a 24Vdc signal or volt-free relay contacts. When the fire alarm activates, it sends a signal to the controller, which then wirelessly commands all connected door closers and holders to release, allowing the fire doors to close automatically.
What happens if there’s a power cut?
The controller has a built-in 6-hour battery backup that automatically activates during mains power failure. This ensures continuous operation and fire protection even during extended power outages. The system will indicate low battery status via LED indicators, alerting maintenance staff to check the power supply.
How does the controller monitor device health?
The controller performs automatic 2-hour status checks of all connected door closers, door holders, and booster units. This fault monitoring system checks battery levels, signal strength, and device responsiveness. If any issues are detected, the controller’s LED indicators alert maintenance personnel, and the system can be configured to send fault signals to the building management system.
What is the difference between the Controller and the Booster?
The Controller (Part No. 3-80-0012) is the main hub that connects to the fire alarm system and manages all devices. The Booster (Part No. 3-80-0014) is a range extender that receives signals from the controller and retransmits them to devices beyond the controller’s direct range. Boosters are used in large buildings or where signal obstacles exist to ensure reliable coverage throughout the installation.
Does the system require a radio license?
No, the Salamander Controller operates on the 868MHz frequency band, which is license-exempt under European standards (EISI EN 300 220). This eliminates the need for radio licensing fees and associated administrative burden whilst ensuring legal compliance.
How does the controller prevent radio interference?
The controller automatically scans for ‘quiet’ channels among the 14 available radio channels to avoid interference. It uses a very low duty cycle RF interface, meaning transmissions are brief and infrequent, minimizing the potential for interference with other systems. The controller continuously monitors signal quality and can switch channels if interference is detected.
Is the system compliant with BS7273-4?
Yes, the Salamander Controller is suitable for installations complying with Critical Actuation (Category A) as defined by BS7273-4. This is the highest category of fire door control system, ensuring the most reliable and immediate response to fire alarm signals. The system is also CE marked under the Construction Products Regulation.
Can I add more devices to an existing Salamander installation?
Yes, the Salamander Controller is fully compatible with existing Salamander installations. You can add additional door closers, door holders, or ZleepSafe devices to an installed system, up to the maximum of 99 closers/holders per controller. New devices are easily registered with the controller during commissioning.
Specifications
- Part Number: 3-80-0012
- Product Name: Salamander Controller
- Dimensions (H X W X D): 196 x 280 x 42mm
- Weight: 350g
- Housing Material: ABS
- Power Supply: 230Vac 50Hz mains supply with 6-hour battery backup
- Display: LEDs indicate system working, low battery, low signal, unit number
- Controller Interface: 24Vdc signal or volt-free relay contacts for fire and fault response
- Device Capacity: Up to 99 door closers or door holders, unlimited ZleepSafes
- Fault Monitoring: Automatic 2-hour status check of all closers, holders and booster units
- Fail-safe Release: Release on low battery, communications failure, fire, fault or manual
- Radio Frequency: 868MHz to European standard, radio licence exempt
- Radio Range: Typically 40-50m (site specific), extendable up to 8 times with boosters
- RF Interface: 14 available channels with automatic scanning, very low duty cycle
- Compliance: Suitable for Critical Actuation (Category A) BS7273-4
- Standards: EISI EN 300 220 (license exempt), CE marked, Construction Products Regulation
- European Patent: No 1799944
Downloads
- Datasheet (Adobe PDF)
Additional information
| System Type | |
|---|---|
| Device Type | |
| Colour |