Quantec Controller
£310.39 (inc VAT: £372.47)
Summary
The Quantec Controller QT601-2 provides comprehensive power supply and control for Quantec Addressable Call Systems. This essential component monitors all network devices whilst managing the routing and distribution of calls throughout the system.
The controller offers extensive connectivity options including network wiring, standby batteries, laptop connections for system programming, optional paging/DECT equipment, and optional printer or PC connectivity to run Quantec’s QT707S Surveyor data management software. With a library of 40 pre-set and 45 custom place names, the system offers flexibility for various installation requirements.
Installation options include semi-flush mounting using a QT385 bezel or fully-flushed mounting using a BF359/3S stainless steel enclosure. System wiring requires one or more QT603 network splitters and should be configured in a spine and limb arrangement using appropriate cabling.
Features
- Supplies power to and controls a Quantec Addressable Call System
- Monitors all network devices and manages routing and distribution of calls
- Provides connections for network wiring, standby batteries and laptop for system programming
- Compatible with optional paging/DECT equipment
- Optional printer or PC connection for Quantec’s QT707S Surveyor data management software
- Includes library of 40 pre-set and 45 custom place names
- System setup via laptop PC running Quantec’s QT707 programming tools
- Semi-flush mounting option using QT385 bezel
- Fully-flushed mounting using BF359/3S stainless steel enclosure
- Compatible with QT603 network splitters for system wiring
- Spine and limb wiring arrangement using 1.5 to 2.5mm² T&E and 4 to 8 core stranded security cable
- 2 line x 40 character backlit display
- Five open collector outputs for different call types and fault monitoring
- RS232 connections for PC/printer and paging equipment
- Accepts 2 x 12V 7Ah VRLA batteries connected in series
FAQ
What is the Quantec Controller used for?
The Quantec Controller QT601-2 supplies power to and controls a Quantec Addressable Call System. It monitors all network devices and manages the routing and distribution of all calls throughout the system.
What mounting options are available?
The controller can be semi-flush mounted using a QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure, providing flexible installation options to suit different environments.
What software is required for system setup?
System setup requires a laptop PC running Quantec’s QT707 programming tools. The controller also supports connection to a PC running Quantec’s QT707S Surveyor data management software for ongoing system monitoring and management.
What type of wiring is required?
System wiring requires one or more QT603 network splitters and should be configured in a spine and limb arrangement. Spines should use 1.5 to 2.5mm² T&E cable, whilst limbs should use 4 to 8 core stranded security cable.
What battery backup is supported?
The controller supports 2 x 12V 7Ah VRLA batteries connected in series, providing standby power in the event of mains failure.
What outputs are available on the controller?
The controller features five open collector outputs: OP1 for standard calls, OP2 for help request calls, OP3 for emergency calls, OP4 for attack calls, and OP5 as a failsafe fault output. It also provides 24V auxiliary power output with a maximum current of 100mA.
Specifications
- Mains Supply: 230V 50/60Hz
- Mains Rated Current: 350mA maximum
- Internal Power Supply: 27Vdc nominal
- Total Output Current Limited To: 3A @ 230Vac
- Quiescent Current: 100mA @ 24V
- Max Battery Size And Type: 2 x 12V 7Ah VRLA connected in series
- Open Collector Outputs: OP1 (active on standard call); OP2 (active on help req. call); OP3 (active on emergency call); OP4 (active on attack call); OP5 (failsafe fault output). Voltfree single pole c/o. Max. switch curr.
- Other Outputs: 24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA
- PC Connection: CONN1 provides an RS232 connection for use with Quantec Surveyor data management software (via a PC) or a Quantec Printer
- Indicators: 2 line x 40 character backlit display; Power LED (lit when power is present, off when no power present)
- Controls: Accept (A); Scroll Up; Scroll Down; Code Entry Buttons (1, 2, 3 and 4); Escape (E)
- Connections: Plug-on type, largest acceptable conductor size 1mm²
- Expansion Connections: CONN2 provides an RS232 connection for paging equipment
- Product Dimensions (mm): 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid)
- Construction & Finish: Metal base, plastic lid
- IP Rating: IP30
- Weight: 3.5Kg
- Operating Conditions/Temperature: -5°C to +40°C. Max relative humidity: 95%
Downloads
- Datasheet (Adobe PDF)
Additional information
| Device Type | |
|---|---|
| System Type |
