Kidde Commercial KE-DB3010W | Intelligent Addressable Base | Twist-and-Lock Fitting
£2.97 (inc VAT: £3.56)
Summary
The KE-DB3010W is a first-fix base built for fitting Kidde Commercial’s Excellence series intelligent detectors quickly and reliably on new fire detection installations. Mount and wire the base ahead of final device fitting, then insert, remove or replace any Excellence series detector with a simple twist and lock action, without touching the wiring again.
For you, that means fewer second-fix visits and less disruption if a detector needs replacing or servicing later in the system’s life. The included isolation bridges also let you carry out loop continuity testing before any detectors are fitted, so wiring faults get caught early rather than during commissioning.
Colour coded, clearly marked terminals with captive screws help you wire correctly first time, while the large rear cable entry plus five side entries give you flexibility whether you’re running cable through conduit or surface trunking.
Once the base is installed, it’s compatible with Excellence series detectors such as the KE-DP3020W dual optical smoke detector and the KE-DP3021W dual optical heat detector.
Features
- Twist and lock detector fitting - swap or upgrade a detector on site without rewiring the base
- Isolation bridges included - prove loop continuity before any detectors are fitted
- Dual address tag locations - label the device wherever the base ends up facing
- Selectable locking mechanism - stop unauthorised removal, released only with a dedicated tool once activated
- Colour coded, captive screw terminals - wire loop, earth and remote indicator connections correctly first time
- Cable cut-length template in the base - measure and trim cables accurately on site
- Large rear plus five side cable entries - route cabling flexibly without extra fixtures
- Key-hole fixing slots - fit directly to ceiling structures or conduit boxes for faster first fix
- Insert and lock indicators with audible click - confirm a detector is properly seated at a glance and by feel
- Dual contact points per connector - keep a reliable base-to-detector connection over the system’s life
- Remote indicator support - extend visual signalling where the detector itself isn’t visible
FAQ
Which detectors work with the KE-DB3010W?
The base is designed for the Kidde Commercial Excellence series point detectors, including the dual optical smoke and optical/heat detectors, heat detectors, and their isolator, sounder and VAD (visual alarm device) variants. Any Excellence series detector twists and locks into this same base without rewiring.
Can I test the loop before detectors are installed?
Yes. The base includes isolation bridges that maintain loop continuity when no detector is fitted, so you can carry out cable continuity testing during first fix and before devices go in.
What cable sizes and terminals does it support?
The base accepts cable from 1 to 2.5mm diameter (0.8 to 5.2mm² / AWG 18 to 10) across two cores, with seven terminals covering A+, A-, B+, B-, screen, and remote indicator (RI+, RI-) connections.
How do I remove a detector once it's locked in place?
Excellence series detectors have a selectable locking mechanism built in. Once activated, a detector can only be released from the base using a dedicated tool, which helps prevent unauthorised removal on site.
Is a recessed version of this base available?
The KE-DB3010W itself is a surface mount base. Kidde Commercial offers other base accessories for recess and surface installations, so check the specific accessory needed if you’re fitting into a ceiling void or recessed structure.
Can I connect a remote indicator to this base?
Yes, the base has dedicated RI+ and RI- terminals for remote indicator connections, and it’s compatible with conventional remote indicators such as the AI673 (with buzzer) and PA25/3L.
Specifications
General
| Compatibility | Kidde Commercial Excellence series point detectors |
|---|---|
| Connectivity | 2-wire loop, earth & remote indicator |
Electrical
| Cable Specification | 1 to 2.5 mm Ø / 0.8 to 5.2 mm² / AWG 18 to 10 |
|---|---|
| Number Of Cable Cores | 2 |
| Terminals | 7 (A+, A-, B+, B-, Screen, RI+, RI-) |
Physical
| Physical Dimensions | 100 x 17 mm (Ø x H) |
|---|---|
| Net Weight | 55 g |
| Colour | Traffic white (RAL9016) |
| Mounting Type | Ceiling mount |
| Cable Entries | 5 side, 1 rear |
| Material (Body) | Polycarbonate |
Environmental
| Vandal Proof | No |
|---|---|
| Operating Temperature | -10 to +65°C |
| Storage Temperature | -30 to +75°C |
| Relative Humidity | 10 to 93% noncondensing |
| Environment | Indoor |
Regulatory
| Compliancy | CE, REACH, RoHS 3, WEEE |
|---|---|
| Certification | CE |
Downloads
- Datasheet (Adobe PDF)
Additional information
| System Type | |
|---|---|
| Colour |
Related Products
More products from Kidde Commercial
Kidde Commercial KE-DB3010B | Addressable Detector Base | First-Fix Ready, Twist-Lock Action
£7.64 (inc VAT: £9.17)
Kidde Commercial KE-DBA-AUXW | Intelligent Addressable Deep Base | 5 Cable Entries, Dual Tag Locations
£3.16 (inc VAT: £3.79)
Kidde Commercial KE-DP3020W | Addressable Dual Optical Smoke Detector | Dual Wavelength Discrimination, Tri-Colour Status LED, IP20
£25.78 (inc VAT: £30.94)
Kidde Commercial KE-DP3021B | Addressable Dual Optical Heat Detector | Dust & Steam Discrimination
£44.48 (inc VAT: £53.38)