GST DI-9103E DI-9000E Series Addressable Heat Detector | A1R, A2S & BS Programmable
£19.30 (inc VAT: £23.16)
Key features
- Fixed temperature or rate-of-rise alarms
- Semiconductor heat sensor
- Local reed switch test activation
Downloads
Summary
The GST DI-9103E is an addressable heat detector that you can programme to one of three detection categories, so one model covers both rate-of-rise and fixed temperature jobs. It supports heat classes A1R, A2S and BS and measures temperature with a semiconductor heat sensor.
View full overview Show less
That means fewer part numbers to carry and less chance of arriving on site with the wrong class. It suits places where a flaming fire is more likely and would force a sharp rise in temperature.
It runs on the GST digital loop protocol and works with the GST200N and GST-IFP4E control panels. It is loop powered over a 2-wire loop, addressed electronically, and fits the common GST detector base with an output for a remote indicator.
Features
- Three programmable detection categories - set A1R, A2S or BS to suit the area
- Rate-of-rise or fixed temperature - one detector covers both alarm types
- Semiconductor heat sensor - analyses the temperature conditions in the protected area
- Reed switch test - activate a local test for quick maintenance checks
- Self-diagnostic testing - the detector checks itself for reliable operation
- Electronic addressing - guards against uncontrolled address changes
- 360 degree alarm LED - visible from any direction, with configurable polling LED support
- Remote indicator output - connect a remote indicator where the detector is out of sight
Specifications
| Detection Principle | Heat sensitive thermistor |
|---|---|
| Sensitivity | Category A1R, A2S, BS |
| Alarm Temperature | +58°C minimum, +77°C maximum |
| Rate-Of-Rise | Supported |
| Compatibility | GST DI-9000E systems; GST200N and GST-IFP4E control panels |
| Alarm Levels | 3 |
| Status Indication | LED |
| Connectivity | 2-wire loop and remote indicator |
| Addressing Method | Electronic |
| Power Supply Type | Loop powered |
| Operating Voltage | 16 to 28V DC (24V DC typical) |
| Quiescent Current | ≤600 μA |
| Alarm Current | ≤1.5 mA |
| Cable Specification | Greater than 1 mm² |
| Output Quantity | 1 |
| Remote Alarm Output | 2 mA |
| Dimensions | 100 x 53.3 mm (diameter x height) |
| Shipping Weight | 110 g |
| Colour | White (RAL 9016) |
| Mounting Type | Ceiling mount |
| Body Material | ABS |
| Operating Temperature | -10°C to +50°C |
| Application Temperature | -10°C minimum, +65°C maximum |
| Relative Humidity | ≤95% non-condensing |
| Environment | Indoor |
| IP Rating | IP2x |
| Approvals | EN 54-5, BS 5839-1, CPR, LPCB, CE, REACH, RoHS, WEEE |
FAQ
It uses the GST digital loop protocol and is compatible with the GST200N and GST-IFP4E intelligent fire alarm control panels. It is for GST DI-9000E systems. Yes. The detector can give fixed temperature alarms alone or rate-of-rise alarms, depending on the category you programme. The supported classes are A1R, A2S and BS. All DI-9000E series detectors fit the common GST detector base. The base also allows a common remote indicator to be connected. It connects to a 2-wire loop and is loop powered. The specified cable is greater than 1 mm². The detector has a local reed switch test, so you can activate a test at the device. It also runs self-diagnostic testing.Which control panels does the DI-9103E work with?
Can it work as a fixed temperature detector only?
Which base does it fit?
What cable does it need?
How do I test it on site?
Downloads
- Datasheet (Adobe PDF)
Additional information
| Device Type | |
|---|---|
| Detection Type | |
| System Type | |
| Colour | |
| Environment |

