Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call Point
£35.74 (inc VAT: £42.89)
Summary
The ZP880 Series is an intelligent range of addressable manual call points. The ZP886R-S27 is a red, single action indoor MCP. It is delivered complete with resettable element, test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.
This single action MCP is a standard profile, indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual, tricolour LEDs it offers 180°, clear local indication of its operational status, even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access & test key facility.
The front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.
The ZP880 range may be used on compatible Ziton fire systems. They can be deployed seamlessly into existing legacy systems without CIE configuration changes.
For locations where malicious operation or accidental impact from flying objects may occur (for example sports halls), operation can be restricted by the addition of a clear, polycarbonate, front cover (DMN782), which can be further protected by a cover seal (DMN798).
Features
- Reliable single action manual call point for surface and flush mounting
- Dual, tri-colour status indicators offers 180° alarm visibility
- Tamper resistant design with resettable or frangible element
- Unobtrusive front facing test facility
- Standard mounting options facilitates easy retrofitting to existing installations
- Matching back box with rear, top and bottom cable entry
- Screen connection terminal for electrically noisy installations
- Pluggable connector with link through facility for ease of installation and pre-commissioning testing
- An alarm flag on the face of the manual call point allows alarm indication even without alarm LEDs
- Fast, no-tools-required maintenance using the test key
- Up to 127 devices per loop
Specifications
- Status Indication : Dual LEDs showing red for alarm, yellow for isolated or fault, and green for communication.
- Compatibility : Designed for Ziton ZP7 systems with DIP switch addressing.
- Power Requirements : Loop powered with an operating voltage of 16-20 VDC and low current consumption.
- Dimensions : 87 x 87 x 26 mm without the back box and 87 x 87 x 57 mm with the back box.
- Construction : Made of flame-retardant ABS with an IP41 rating, suitable for indoor use.
- Environmental Range : Operates within temperatures of -25°C to +72°C, with 10-95% relative humidity (non-condensing).
- Regulatory Compliance : Meets CE, REACH, RoHS 3, WEEE standards.
- Certification : CPR certified with APPLUS certification marks, adhering to EN54:11 standards.
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 0.165 kg |
|---|---|
| Dimensions | 0.87 × 0.87 × 0.26 cm |
| Environment | |
| Hazardous Applications | |
| Marine Applications | |
| Short Circuit Isolator | |
| System Type |
