Kentec K16100D3 | Battery Enclosure | Sigma Compatible, 38Ah Capacity
- Compatible with Sigma control equipment
- Accommodates 38Ah batteries
- Key lockable with standard 801 key
Kentec
Filters
Kentec K16100M2 | Sigma Battery Enclosure | 7Ah Capacity, 1.2mm Steel
- Designed for 7Ah batteries in Sigma style systems
- Fully welded steel construction with epoxy powder coating
- Key lockable security with standard 801 key
Kentec K1610245 | Syncro AS Battery Enclosure | 65Ah Capacity, 720x300x300mm
- 65Ah battery capacity for extended standby power
- Key lockable steel construction with epoxy powder coating
- 720 x 300 x 300mm dimensions designed for Syncro AS systems
Kentec K1619911 | Syncro AS Battery Enclosure | 24Ah Max Capacity, 500x355x145mm
- 24Ah battery capacity for extended standby power
- Key lockable steel construction with epoxy powder coating
- Syncro AS style to match existing control equipment
Kentec K1620203 | Syncro AS Fire Alarm Battery Enclosure | 18Ah Capacity, 500x355x117mm, Key Lockable
- Compatible with Syncro AS fire alarm control panels
- 18Ah battery capacity with secure key lockable enclosure
- Robust all-steel construction with epoxy powder coating
Kentec K1630313 | Syncro AS Fire Alarm Battery Enclosure | 38Ah Max Capacity, Steel, Key Lockable
- 38Ah maximum battery capacity for extended standby power
- Key lockable steel construction with epoxy powder coating
- Compatible with Syncro AS fire alarm control panels
AMX Graphical Fire Alarm Management
- Monitor multiple alarm networks with TCP/IP support
- Full device level graphics with automatic site map switching
- Compatible with Taktis EN & UL, Syncro AS & Elite RS panels
Complete the setup
Hand-picked accessories for this item
Kentec Syncro AS Lite 1 Loop Addressable Panel
- Single loop analogue addressable panel with multi-protocol support
- Cost-effective solution for smaller standalone installations
- EN54-2 and EN54-4 certified with 3A power supply
Complete the setup
Hand-picked accessories for this item
Kentec Syncro AS Addressable Panel
- Expandable 1-2 loop system with multi-protocol support (Apollo, Argus Vega, Hochiki)
- Network up to 64 panels with optional fault tolerant network card
- EN54-2 and EN54-4 certified with 3A power supply and removable chassis
Complete the setup
Hand-picked accessories for this item
Kentec Sigma XT Extinguishing Control Panel
- Three detection zones with flexible zone combinations
- Built-in extract fan control functionality
- EN12094-1, EN54-2 & EN54-4 approved
Complete the setup
Hand-picked accessories for this item
Kentec Sigma XT+ Extinguishant Coincidence Unit
- Dual extinguishant outputs with main/reserve facility
- EN12094-1, EN54-2 & EN54-4 approved
- Two fully monitored coincidence inputs
Complete the setup
Hand-picked accessories for this item
Kentec Sigma XT+ Multi-Area Extinguishant Control Panel
- Multi-area control - 1 to 4 extinguishant areas
- Dual extinguishant outputs per area with main/reserve configuration
- EN12094-1, EN54-2 & EN54-4 approved
Kentec Sigma SI Extinguishant Status Indicator
- BS EN12094-1 certified when used with Sigma XT control equipment
- High brightness LED indication with detailed panel status
- Countdown timer shows time remaining until release
Kentec Sigma XT Extinguishant Hold Off
- Compatible with all EN approved Kentec extinguishing panels
- Shrouded push button prevents inadvertent operation
- Holds extinguishant release countdown when activated
Kentec Sigma XT Extinguishant Abort Button
- Large red mushroom head pushbutton for high visibility
- Twist to release latching action prevents accidental reset
- Compatible with all Sigma XT+ control panel models
Kentec Sigma XT Extinguishant Extract Key Switch
- Controls extract fan plant for fire protection systems
- Common '901' keyswitch with key trapped in operated position
- Compatible with all Sigma XT and Sigma XT+ models
Kentec Sigma XT Main/Reserve Duty Extinguishant Keyswitch Unit
- Common '901' keyswitch standard across fire systems
- Compatible with Sigma XT and Sigma XT+ models
- Surface or single gang flush mounting options
Kentec Sigma CP-A AlarmSense 2, 4 or 8 Zone Panel
- Apollo AlarmSense 2-wire control panel
- Available in 2, 4 or 8 zone sizes
- Available in Surface or Flush Mounting Options
- Auxillary power supply
Complete the setup
Hand-picked accessories for this item
Kentec Sigma CP Conventional 2, 4 or 8 Zone Panel
- Fully certified to BS EN54-2 and BS EN54-4
- 2, 4 or 8 version zones
- Surface and Flush Mounting Options
Complete the setup
Hand-picked accessories for this item
Conventional Sounder Controller - 230V AC
- Two, four or six way units available
- Apollo, Argus Vega or Hochiki protocols available
- Integral power supply
- Robust steel enclosure matches Syncro control panel styling
- Space for 7Ah batteries
- Power Healthy and Power Fault indicators
Kentec Addressable Matrix Mimic Panel For Syncro AS or Taktis
- Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
- Full colour printing.
- Available in a range of standard enclosures to suit any applications.
- Bespoke sized units can be made upon request.
- Choice of Red, Green or Yellow LED’s.
- Available with or without controls.
Kentec B1828 Replacement 2 Position Controls Enabled Keyswitch
- Kentec 2 position controls enabled keyswitch.
- Replacment for Syncro and Sigma range of panels.
Kentec Battery Box - Sigma CP/Syncro AS Styling
Key Features
- Fully welded, all steel construction
- Tough epoxy powder coated finish
- Key lockable
- Wide range of styles and sizes
- Up to 65Ah batteries can be fitted
- Fully enclosed and robust construction
Kentec Sigma XT Ancillary PCB
- 24V DC powered boxed ancillary board
- Two-wire serial RS485 connection with additional power cores
- Volt-free relay outputs for remote subsystem control