Zeta Alarms

• IP67 weatherproof rating for outdoor installations
• Resettable element mimics breaking glass feel
• EN 54-11 approved addressable manual call point

• Designed to meet EN54 requirement
• Lockable to base to stop unauthorised removal
• Remote LED output
• 8 LEDs for improved, 360° visibility
• Compatible with all Fyreye MkII bases
• Addressed with dip switches or hand-held programmer

• Indoor MKII addressable sounder compatible with Zeta control panels
• 102dB @ 1m sound output
• Available in Red or White

• Rate of rise and fixed heat detection at 57°C
• Twin LEDs for enhanced alarm indication
• DIFT approved, EN54 parts 5 & 7 compliant

• Combined sounder and VAD in single unit
• 100dB sound output at 1 metre
• Hard or soft addressable capability

• IP65 weatherproof sounder
• 16 Tone patterns (site selectable)
• Available in red or white

• IP65 weatherproof sounder/beacon
• Flashing rate 0.33Hz - 1.5Hz
• Available in red or white

• Addressable loop interface for up to 16 conventional detectors per loop
• 13mA zone output capacity for powering connected devices
• 254 selectable addresses via 8-segment DIL switch configuration

• Loop powered (60 devices per loop as maximum)
• Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
• Equipped with short circuit line isolator

• Manual call point for the Infinity ID2 system
• Indoor or outdoor (IP67) version available
• Visible warning flag confirms activation

• Loop powered
• Equipped with short circuit line isolator
• Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer

• This is not a loop powered device and an adequate 24Vdc input (with battery backup) is needed.
• Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
• Equipped with short circuit line isolator

• Compatible with all MKII range of detectors
• 3 different types of base available

• This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
• Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
• Equipped with short circuit line isolator

• Very high visibility of the alarm condition
• High impact resistant ABS glass fiber material Fully patented
• Quick and easy installation

• Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
• Can be installed anywhere on loop

• Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
• Can be installed anywhere on loop

• Modular construction allows a panel to be specified using just the required modules
• Up to 6 loop card modules
• 4.3” colour touch screen display
• Capacity for up to 10 intelligent modules
• Full system redundancy

• EN54-11 approved conventional manual call point
• Surface mounted (includes back box) or flush mounted with optional bezel
• Positive activation that mimics the feel of breaking glass
• Simple key to reset operating element - no broken glass

• Sandwich design between base and detector
• 16 selectable international alarm tones
• Individual or group triggering capability

• Bezel to flush mount Zeta CP3 call point
• Compatable with ZT-CP3. ZT-CP3/AD or ID2-MCP

• Enclosure suitable fir either Flush or Surface mount
• Status LED
• Full duplex operation
• Automatically dials the control panel when ‘off hook’
• Dual purpose, fire telephone or disabled refuge call point
• IP23 suitable for indoor use

Enter a brief description of your product here. This description will be displayed on product list pages.

• Photoelectic sensing technology (ZT-ST5 & ZTST5/10)
• Electronic thermistor sensing technology (ZT-TH5)
• Easy installation and maintenance
• Sealed Battery case of the back available (with 10- year Li Battery model)
• SMD circuit board design - quality and reliability guaranteed
• Low-battery warning
• Test button verifies battery and alarm operation
• Loud alarm signal of exceeding 85 dB in alarm mode
• Five-year limited warranty
• HUSH button, to stop the alarm from sounding
• 10-year Long-life lithium battery (ZT-ST5/10 only)
• The power supply will be cut out automatically when removing the detector from the base