Emergency Systems
Showing 101–150 of 302 results
-
-
VoCALL 5 Emergency Voice Communication Control Panel
- Capability of running outstations or emergency assist alarms.
- Simple cabling enables direct connection to outstations.
- Steel flush mount cover option for challenging environments.
-
Lexicomm ViLX-ACM-8 Assist Call Master Station
- Accepts assist calls
- 4.3” touch-screen
- BS5839-9 compliant
-
Emergency Telephone System Control Panel
- BS5839 part 9 (2011) compliant
- Integral 24Vdc power supply 2 Amp
- LCD Display
- 7 status LEDs
- Fault & alarm relay output
-
Omnicare Control Panel
- Loop wiring.
- One loop for multiple styles of remote unit.
- Combined outstation available featuring a disabled refuge and fire telephone in one housing.
- Full networking and multi-panel facilities.
- All outstations powered from the line, including toilet alarms.
- Advance disabled refuge remote option.
- Robust, reliable and well established system.
-
Lexicomm ViLX-Commander Assist Call Master Station
- Touchscreen panel PC with solid state drive.
- Integrated telephone handset.
- Full status indication.
- Extensive logging of all calls and faults.
- Simple importation of site plans and drawings.
-
SigTEL Disable Refuge System 8 Line Expansion Unit
- Can be connected to an ECU-4 or ECU-8 master controller to increase its line capacity to 12 or 16 lines respectively
- Does not require a separate mains supply or batteries
-
Lexicomm ViLX-EBZ Flush Mount Stainless Steel Bezel for ViLX-ACM-8 and ViLX-EX8
- Brush stainless bezel for Lexicomm assist call master station or expander.
- Provides a professional finish.
-
Lexicon ViLX-BSS-G Green Surface Surround for ViLX-OSB-G
- Green surface surround for Lexicon green type b outstation.
- suitable for surface mount installation.
-
Lexicomm ViLX-LBZ-1 Legacy Bezel
- Flush mount bezel to allow legacy square outstations to be replaced by current model.
-
Hikvision DS-QAZ1325G1T-EY/EU | 25W Network Horn Speaker | PoE, IP67 Anti-Corrosion, Two-Way Audio
- 25W power output with 124 dB maximum sound pressure level
- IP67/IK10 weatherproof rating with anti-corrosion protection
- PoE+ powered with built-in 64GB storage and two-way audio
-
Identi-Leak IL-CONV | Conventional Water Leak Detection Panel | 2-8 Zones, 72Hr Backup
- Available in 2, 4 and 8 zone configurations for scalable protection
- Up to 72 hour battery backup with up to 50m cable or 20 probes per zone
- Mobile communicator compatible for instant remote leak and fault alerts
-
Identi-Leak IL-FC | Fixing Clips for Water Detection Cable | Secure Floor Mounting
- Screw fixing design for secure cable and wiring installation
- Compatible with detection cable, probes and interface wiring
- Supplied in packs of 100 for comprehensive system coverage
-
-
Identi-Leak IL-MINI-2 | 2 Zone Water Leak Detection Panel | 230V, Battery Backup
- Compact 2-zone panel for residential and small commercial applications
- Supports up to 20m cable or 8 probes per zone using combined interface
- Battery backup provides 24/7 protection with fully monitored circuits
-
Identi-Leak IL-SB | Water Leak Sounder Beacon | Blue Visual Indicator, Low Profile
- Combined audible and visual alarm with integrated blue beacon
- Low-profile design for unobtrusive yet effective installation
- Clear "Water Leak" branding ensures immediate identification of alarm type
-
Identi-Leak IL-SS | Water Leak Voice Sounder | Clear Spoken Message
- Low profile design with clearly identifiable blue beacon
- Available with or without beacon for flexible installation requirements
- Easily identifiable with clear "Water Leak" branding on device
-
-
Identi-Leak IL-WDC-KIT Cable Zone Kit | Water Detection | 5m / 10m, Surface Interface & Link
- Complete cable detection zone with interface and terminator included
- Available in 5 m or 10 m cable lengths for flexible coverage
- Surface-mount interface with bright blue LED for leak indication
-
-
Identi-Leak IL-WDP | Water Leak Detection Probe | Point Sensor, 1m/3m
- Effective point detection for solid floors
- Up to 20 probes per zone
- Available in 1 m and 3 m lengths
-
-
Identi-Leak IL-WDP-D | Drip Tray Mounting Kit | Variable Height, Probe Holder
- Compatible with both HS and ID probes for universal application
- Mounts on most air conditioning unit drip trays
- Variable height adjustment for different tray configurations
-
-
-
Identi-Leak IL-WDP-SK | Water Leak Detection Probe Starter Kit | Complete System
- Complete one-zone water leak detection system with pinpoint accuracy
- Includes IL-MINI-2 panel, interface, detection probe and sounder
- Provides everything needed for immediate point detection installation
-
Identi-Leak Remote Indicator
- Bright blue LED provides clear visual indication of leak location
- Works with both cable and probe interfaces for flexible installation
- Flush or surface mount options for discreet placement outside monitored areas
-
Scope MMD1 | Wireless LED Moving Message Display | POCSAG Receiver, Bi-Colour
- Built-in POCSAG receiver with up to 1 mile wireless range
- 80 x 16 pixel bi-colour LED display with four colour options (red, green, amber, mixed)
- Pre-programmed, ready to use with simple wall or ceiling mounting
-
Vimpex Identi-Leak IL-INT | Water Leak Detection Interface | Cable/Probe Connection, Blue LED
- Combined probe and cable interface for flexible detection zone configuration
- Bright blue LED activation for rapid leak location identification
- Flush or surface mounting options for versatile installation requirements
-
Aidalarm Wireless Disabled Toilet Alarm Kit
- BS8300 and DDA compliant wireless system
- Battery or mains powered options available
- Supports up to 8 wireless devices per controller
-
Hoyles 12v Ceiling Pull Switch with LED and 2.5m Cord
- Non-latching momentary switch with re-assurance LED indicator
- 2.5m cord length with voltage free SPCO 5A contacts
- Available in red or orange for disabled toilet and nurse call applications
-
Lexicomm AssistCall Weatherproof Call Button
- IP66 weatherproof call button with blue visual confirmation indicator
- Maximum 6 call buttons per line with last operated registering
- Can replace standard call button or pull cord in wet areas
-
Lexicomm AssistCall Weatherproof Cancel Plate
- IP66 weatherproof rating ideal for showers and wet areas
- Brushed stainless steel fascia with blue acknowledgement indicator
- BS 8300-2:2018 compliant with flush or surface mounting options
-
Sanipull Anti-Ligature Hygienic Pull Cord
- Cleanable vinyl construction preventing bacterial build-up unlike traditional string pull cords
- Anti-ligature safety with 8mm perforations every 15cm breaking at 13kg ± 1kg force
- 40-second installation with clamshell design for traditional pulls or ceiling fittings
-
Quantec Controller
- Controls addressable call system with power supply and device monitoring
- Includes 40 pre-set and 45 custom place names
- Multiple connectivity options including paging, DECT, printer and PC
-
Quantec-Pro Core Controller
- Supports up to 255 editable 24-character place names
- 16 zone and 16 group equations (double standard Quantec capacity)
- 2.5A power output with integrated battery backup
-
Quantec Network Splitter
- Six fused 400mA limb connections for field devices
- Protects against open and short circuit faults
- Supports up to 60 addressable devices per splitter
-
Quantec Programming Software & Lead
- PC programming tools for Quantec addressable call systems
- Windows XP, Vista, 7 and 8 compatible
- Includes USB memory stick and programming lead
-
C-Tec XFP & Quantec USB Programming Lead
- USB to RS232 programming interface
- 1.8m cable length for flexible positioning
- Compatible with XFP fire panels and Quantec controllers
-
Quantec Configurator
- Programs Quantec devices individually
- Windows PC compatible
- Includes all connection leads
-
Flush Mounting Bezel for a Quantec Controller
- Semi-flush mounting for Quantec controllers
- Slimline mild steel construction
- 456 x 293mm front face dimensions
-
C-Tec Shallow Glazed Stainless Steel Enclosure
- Brushed stainless steel construction with glazed door
- Compatible with XFP and Quantec control panels
- Optional camlock or electromagnetic lock available
-
Quantec-Pro Corridor Display
- High-contrast OLED display supporting 24-character place names
- Priority-based call management with urgency-responsive alerts
- HTM-compliant tones with adjustable volume and external sounder option
-
Quantec Corridor Display
- 16 character x 2 line backlit LCD display
- Available with or without integrated control buttons
- Priority call management with urgency indicators
-
Quantec Stainless Steel Corridor Display
- Brushed stainless steel vandal-resistant construction
- 16 character x 2 line backlit LCD display
- Priority call management with caller identification
-
Quantec Large Corridor Display
- Large 965mm x 163mm LED display for extended viewing distances
- Colour-coded call indication: red for calls, green for presence
- 16 character x 2 line multi-LED display
-
Quantec-Pro Display Interface
- RS232 serial interface for large corridor displays
- Connection monitoring with fault indication
- Standard UK double gang mounting
-
Quantec Display Interface
- RS232 interface for QT608CD1S large corridor display
- Connection monitoring with status feedback
- Standard UK double gang back box mounting
-
Quantec Overdoor Light
- Dual red and green LED visual indication
- Variable flash patterns for call urgency levels
- UK single gang back box mounting
-
Quantec Overdoor Light with Sounder
- Dual red and green LED indicators with urgency-sensitive alerts
- Integrated sounder with variable intensity sequences
- Standard UK 25mm single gang mounting compatibility