Emergency Systems
Showing 251–300 of 302 results
-
C-Tec NC807C Ceiling Pull Unit
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
-
C-Tec NC809DB Button Reset Point
- It mounts on a standard UK 25mm single gang flush or surface back box
- It can be used to remotely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on the same zone
- It is designed for use with C-TEC's 800 Series Call System
-
C-Tec NC809DB/SS Button Reset Point in Stainless Steel
- Compact 87 x 87 x 24 mm design that mounts on a standard UK single gang back box
- Provides audible and visual indication when a call is acknowledged to reassure users
- Can be used as part of an accessible toilet alarm system to cancel calls from inside the WC
-
C-Tec NC809DBBT Accessible Toilet Reset Point with Sounder
- Allows calls from the NC807C ceiling pull unit to be cancelled from inside the toilet
- Provides visual and audible indication to the user that their call has been acknowledged and help is on the way
- Can be mounted on a standard UK single gang back box and is also available as part of the NC951 accessible toilet alarm kit
-
C-Tec NC809DM Magnetic Reset Point
- The NC809DM can be used to remotely cancel standard calls from the 800 Series Call System
- It requires a separately available NC803M magnetic reset key to operate the magnetic reset target
- The device mounts on a standard UK 25mm single gang flush or surface back box
-
C-Tec NC883D 12V Relay Unit
- Can be directly triggered from the call system's signal lines, provided the unit is supplied with +12V and -V power
- Typically used to switch extra low voltages, but can also switch mains voltages when following the guidelines in the instructions
- Incorporates a high-intensity LED that illuminates red when the relay is active, and includes a white "write-on" area for personalizing the unit
-
C-Tec NC888D Remote Sounder
- Connects to multi-zone 800 Series Call Controllers, Master Indicator Panels, or Switchable Sounders
- Indicates Standard calls with a constant tone and Emergency calls with a pulsing tone
- Limit of two remote sounders per hosting device
-
C-Tec NC889ERM Multi-Purpose Call Latch Module
- Includes a red reassurance LED that illuminates when a call is made
- Provides an onboard magnetic reset facility for cancelling calls
- Offers multiple wiring options via the device's colored leads, making it ideal for applying 800 Series call point electronics to custom-made switch assemblies
-
C-Tec NC894DKB Isolatable Monitoring Point, Button Reset
- It can be used to monitor any device with a normally open or normally closed switch
- It has an isolation keyswitch that temporarily turns off the device's monitoring function when in the isolated position
- It triggers a standard call when activated, making it suitable for monitoring fire exits, drug cupboards, store rooms, and other similar applications
-
C-Tec NC899IRR Keyswitch Reset Point
- Momentarily turning the keyswitch to the "ISOLATE" position resets the call
- The keyswitch must be returned to the "ON" position after reset, as leaving it in "ISOLATE" will disable the NC302RXC receiver's emergency call function
- The reset point mounts on a standard UK 25mm single gang flush or surface back box
-
C-Tec NC917L Standard Call Push with Protruding Button, No Reset, No Remote
- The red LED confirms when a call has been made
- It requires a separate reset point to cancel calls
- It mounts on a standard UK 25mm single gang flush or surface back box
-
C-Tec NCP-13 Anti-Bacterial Wipe Clean Pull Cord Accessory Pack
- The cord has integral properties that can help prevent the spread of infections such as MRSA, E.coli, C.diff, and Norovirus
- The pack is easy to clean using a cloth and mild detergent
- It is compatible with a wide range of ceiling pull units from various manufacturers
-
C-Tec QT616 Quantec Infrared/Radio Fall Sensor
- Transmits up to 10m line-of-sight and has RF coverage dependent on the Quantec receiving device used
- Includes a Karabiner clip and lanyard for easy attachment
- Can be programmed to generate different call levels and include a unique user ID/name
-
C-Tec Stainless Steel Emergency Assistance Alarm Kit
- High-quality brushed stainless steel construction for enhanced durability and aesthetics
- Complete single zone emergency assistance alarm kit with all necessary components
- Simple pull cord activation system for reliable emergency response
-
Disabled Toilet Alarm 1-4 Zone Kit
- Complete disabled toilet alarm system for 1, 2, 3 or 4 toilets/areas
- 4 zone controller supplied with all versions allowing for future expansion
- Controller can be powered by either 12V DC or 240V AC
-
Disabled Toilet Alarm Control Panel
- Designed to meet the requirements of BS8300
- 1-4 zone capability (1 zone per disabled toilet)
- Simple 3 wire operation for all field devices
- Zone LED indication
- System silence & reset options
-
Disabled Toilet Alarm Pull Cord
- Designed to meet the requirements of BS8300
- Ceiling mounted pull cord used to generate an alarm activation
- 2.4m cord length
-
Disabled Toilet Alarm Remote Indicator
- Designed to meet the requirements of BS8300
- Wall mounted device which during an alarm activation will give an visual & audible
alert - Can be installed on other toilet alarm systems
-
Disabled Toilet Alarm Remote Reset
- Designed to meet the requirements of BS8300
- Wall mounted push button which is pressed to cancel an alarm activation
- Can be installed on other toilet alarm systems
-
Disabled Toilet Alarm Replacement Cord and Handles (No Junction Box)
Spare Disabled Toilet Alarm Pull Cord & Handles
-
-
DPL 9050 Pager For Wireless Disabled Toilet Alarm
- Easy to use.
- Hand programmable.
- Out of range indicator.
- Time, date and alarms message time stamps.
-
DPL Wireless Disabled Toilet Alarm Beacon/Sounder Unit
- Easy Installation
- Complies with British Standards
- Repeater/Booster Available
- Simple, effective design
-
DPL Wireless Disabled Toilet Alarm Ceiling Pull Cord
- Easy Installation
- Complies with British Standard
- Single and Multi Pull Variations
- Paging Facilities Available
-
DPL Wireless Disabled Toilet Alarm Kit – Red Reset Key
Enter a brief description of your product here. This description will be displayed on product list pages.
-
DPL Wireless Disabled Toilet Alarm Pocket Pager
- Full Text DisplayÂ
- Rechargeable Batteries
- No Maximum number of Pagers per System
-
DPL Wireless Disabled Toilet Alarm Reset Point
- Easy Installation
- Complies with British Standards
- Single button Reset from alarm status
- Repeater/Booster available
-
DPL Wireless Pager Signal Booster Unit
- Can be powered from existing DC powered equipment on site or from mains supply.
- Supplied with aerial, plug in power adaptor & full instructions.
- Frequency selectable.
- Pager Transmit baud rates selectable.
-
Globex Standard Evacuation Chair
- Lightweight design at just 9.5Kg
- Folds flat for easy wall mounting
- Telescopic handle with automatic non-pinch clips
-
Globex Standard Plus Evacuation Chair
- Lightweight carry evacuation chair at just 11Kg
- Folds flat for easy wall mounting
- Includes carry facility for going upstairs
-
Globex Multi Evacuation Chair
- Versatile for both upstairs and downstairs transportation
- Fixed four-wheel operation for stability
- Includes carry facility for overcoming obstructions
-
Globex Spiral Evacuation Chair
- Suitable for spiral staircases
- Stainless steel construction
- Requires two operators for safe evacuation
-
Globex Stair Climber Evacuation Chair
- Telescopic handle for easy manoeuvrability
- Power controlled high resistance belts for secure movement
- Lockable rear wheels for stability
-
Evacuation Chair Standard Operator Training for 6-24 Delegates
- Certificated trainer and operator training course
- Packages suitable for 6, 12, 18 or 24 delegates
-
Hark Stainless Steel Disabled Toilet Alarm System c/w Battery Back Up
Function meets aesthetics with the Hark Stainless Steel Disabled Toilet Alarm System, complete with pull cord, reset button and indicator.
-
HobWatcher Automatic Hob Isolator System
- Automatic 10-minute timer prevents unattended cooking fires
- 7.5KW load capacity with full double pole isolation
- Quick 15-minute installation replacing standard hob isolator
-
-
Hydrosense Conventional Water Detection Control Panel
- Multi-zone water leak detection (2, 4, 8 zones available)
- Linear and point detection with Hydrowire and probes
- Battery backup with comprehensive fault monitoring
-
Hydrosense HS Conventional Repeater Panel
- Hydrosense HS repeater panel to show alarm infromation in additional location.
- Available in 2, 4 or 8 zones sizes.
- Optional integral PSU.
-
Hydrosense HS Conventional Water Detection Hydro-Probe
- Point leak detection for Hydrosense HS water detection system.
- Ideal for areas where moisture is permitted.
- Drip tray and floor.
-
Hydrosense HS Conventional Water Detection Hydro-Probe Junction Box
- Interfaces Hydro-Probe with HS panel field wiring.
- 1 Hydro-Probe per junction box.
- Housed in attractive polycarbonate encosure.
-
Hydrosense HS Conventional Water Detection Hydro-Wire
- Consistent leak detection along the total length of cable.
- Available in 5 and 10 metre lengths (other lengths on request).
- Simple connection and termination.
- Aesthetically attractive.
-
Hydrosense HS Hydro-Wire Connection Interface
- Interfaces Hydro-Wire with HS panel field wiring.
- 1 Hydro-Wire length per junction box.
- Housed in attractive polycarbonate encosure.
-
-
MayDay Lone Worker Alarm
- Dual countdown timers with audible and visual alerts
- Integral 100dB piezo sounder with battery backup
- Keyswitch arming with OK button reset function
-
Single Zone Call Controller With Relay & Optional Onboard Battery Backup
- A single zone call controller c/w a 12V 140mA PSU.
- Optional standby battery.
- Onboard relay.
- Compatible with C-TEC's entire range of 800 Series Call System components.
- Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
- Includes a volume adjustable sounder and a link-selectable Call Accept/Reset button.
-
Single Zone Call Controller With Stainless Steel Enclosure
- A single zone call controller c/w a 12V 250mA PSU and link-selectable Mute/Reset button.
- Fully compatible with C-TEC's entire range of 800 Series Call System components.
- Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
- Stainless steel enclosure.
-
STI 6200-KS-CHR Evacuation Chair Theft Alarm
- It has proved highly effective in helping prevent theft, misuse or vandalism of evacuation chairs.
- Mounts easily next to protected device.
- 95/105 dB warning alarm when activated.
-
VoCALL CFEAODI Emergency Assist Overdoor Indicator
- Provides an audible and visual signal to indicate the area where assistance is required
-
VoCALL CFEAPULL Emergency Assist Pull Cord Unit
- Positioned so that its readily accessible from the WC or bath (where applicable).