Emergency Systems
Showing 97–120 of 302 results
-
Lexicomm ViLX-ACR Assist Call Repeater
- 2.8” TFT touch screen colour display.
- Connects to System Expanders or TMS3 Master stations.
- Aesthetically pleasing stainless finish.
- No local power required.
-
SigTEL Line Tester
- Allows cable faults to be checked and cleared prior to equipment connection
- Includes all of the test cables and connectors you need
-
Lexicomm ViLX-ILB Type B Refuge Point With Integral Induction Loop
- Hands free full duplex operation
- Integral Induction Loop (AFILS)
- Flush or surface mount
- Braille enhanced Call Button
- Stainless Steel as standard
-
Lexicomm ViLX-IPB2 Weatherproof Type B Refuge Outstation
- IP66 cased Hands free full duplex operation.
- Surface mount.
- Fully Monitored to BS 5839-9:2021.
- Braille enhanced call button.
-
Lexicomm ViLX-OSC Combined Type A and B Outstation
- Compact design
- Ruggedised handset
- High Volume Ringer
- Status LED
- 20mm cable gland knock-out
-
Baldwin Boxall Omnicare Type B Green Disabled Refuge Remote
- Provides two-way, hands free, speech steered communication.
- Self-powered from ring circuit, no local power source is required. Automatic battery backup is provided by the control panel in the event of a mains power failure.
- Green finish (also available in stainless steel BVOCECPG).
- Volt free contact, active when occupied. To operate over-door lamps, silence speaker/sounder, etc.
- Stainless steel ‘press to call’ button.
- Calls can be reset either by of the key-switch on the remote unit or at the master control panel.
- Option to be permanently ‘active’ if required.
- Reset from either remote unit using the key switch or via the master control panel.
- All outstations are in a loop circuit from control panel(s).
- A link to the fire detection system prevents hoax disabled refuge calls. This feature can be completely, or partly, overridden.
- Surface mounting unit (can be flush mounted using a bezel).
-
SigTEL Disable Refuge System Anti-Tamper Stainless Steel Enclosure
- An attractive flush-mounting tamper-resistant cabinet for housing an ECU-4 or ECU-8 master controller
- Helps ensure controllers remain operational at all times by reducing the risk of vandalism
-
Lexicomm ViLX-EX8 8 Line System Expander Panel
- Expand TMS system with an additional 8 lines.
- Fully Compliant to BS 5839-9:2021.
- Integrated Assist Call with acknowledge meeting BS 8300-2:2018.
- Integral 1.2A PSU.
- Inbuilt networking.
-
-
VoCALL 5 Emergency Voice Communication Control Panel
- Capability of running outstations or emergency assist alarms.
- Simple cabling enables direct connection to outstations.
- Steel flush mount cover option for challenging environments.
-
Lexicomm ViLX-Commander Assist Call Master Station
- Touchscreen panel PC with solid state drive.
- Integrated telephone handset.
- Full status indication.
- Extensive logging of all calls and faults.
- Simple importation of site plans and drawings.
-
Lexicomm ViLX-EBZ Flush Mount Stainless Steel Bezel for ViLX-ACM-8 and ViLX-EX8
- Brush stainless bezel for Lexicomm assist call master station or expander.
- Provides a professional finish.
-
Lexicon ViLX-BSS-G Green Surface Surround for ViLX-OSB-G
- Green surface surround for Lexicon green type b outstation.
- suitable for surface mount installation.
-
Vox Ignis ViLX-LBZ-1 | VoCALL to Lexicomm Type B Easyfit Bezel
- Stainless steel bezel for replacing older, larger square VoCALL Type B refuge points.
- Fits a new Lexicomm Type B outstation to the existing VoCALL Type B backbox.
- Bezel only; Lexicomm Type B outstation sold separately.
-
Hikvision DS-QAZ1325G1T-EY/EU | 25W Network Horn Speaker | PoE, IP67 Anti-Corrosion, Two-Way Audio
- 25W power output with 124 dB maximum sound pressure level
- IP67/IK10 weatherproof rating with anti-corrosion protection
- PoE+ powered with built-in 64GB storage and two-way audio
-
Identi-Leak IL-CONV | Conventional Water Leak Detection Panel | 2-8 Zones, 72Hr Backup
- Available in 2, 4 and 8 zone configurations for scalable protection
- Up to 72 hour battery backup with up to 50m cable or 20 probes per zone
- Mobile communicator compatible for instant remote leak and fault alerts
-
Identi-Leak IL-FC | Fixing Clips for Water Detection Cable | Secure Floor Mounting
- Screw fixing design for secure cable and wiring installation
- Compatible with detection cable, probes and interface wiring
- Supplied in packs of 100 for comprehensive system coverage
-
-
Identi-Leak IL-MINI-2 | 2 Zone Water Leak Detection Panel | 230V, Battery Backup
- Compact 2-zone panel for residential and small commercial applications
- Supports up to 20m cable or 8 probes per zone using combined interface
- Battery backup provides 24/7 protection with fully monitored circuits
-
Identi-Leak IL-SB | Water Leak Sounder Beacon | Blue Visual Indicator, Low Profile
- Combined audible and visual alarm with integrated blue beacon
- Low-profile design for unobtrusive yet effective installation
- Clear "Water Leak" branding ensures immediate identification of alarm type
-
Identi-Leak IL-SS | Water Leak Voice Sounder | Clear Spoken Message
- Low profile design with clearly identifiable blue beacon
- Available with or without beacon for flexible installation requirements
- Easily identifiable with clear "Water Leak" branding on device
-
-
Identi-Leak IL-WDC-KIT Cable Zone Kit | Water Detection | 5m / 10m, Surface Interface & Link
- Complete cable detection zone with interface and terminator included
- Available in 5 m or 10 m cable lengths for flexible coverage
- Surface-mount interface with bright blue LED for leak indication
-
