Automatic Extinguisher Systems

Single area extinguishing panel with 3 conventional detection zones and dual extinguishing outputs
Approved and certified to EN12094-1, EN54-2 and EN54-4
2.6A PSU with secure event logging for 1000 events and dynamic colour LCD

Kentec Sigma XT Extinguishing Control Panel

Three detection zones with flexible zone combinations
Built-in extract fan control functionality
EN12094-1, EN54-2 & EN54-4 approved

£438.16 (inc VAT: £525.79)

In Stock

SKU: K11031M2

Kentec Sigma XT Ancillary PCB

24V DC powered boxed ancillary board
Two-wire serial RS485 connection with additional power cores
Volt-free relay outputs for remote subsystem control

Kentec Sigma XT+ Multi-Area Extinguishant Control Panel

Multi-area control - 1 to 4 extinguishant areas
Dual extinguishant outputs per area with main/reserve configuration
EN12094-1, EN54-2 & EN54-4 approved

Premier EX Pro Automatic Extinguishing Panel

Combined fire and extinguishing control panel
4 x 20 LCD display with countdown timer
EN54 parts 2 & 4, EN12094 part 1 approved

Premier EX Pro Output Expansion Relay PCB

Expansion board with either 3 or 8 voltage-free changeover relay contacts
Mounted inside Premier Ex Pro panel

C-Tec EP203 Automatic Extinguisher Panel

Three zone panel
128 x 64 pixel display
EN54-2/4 certified

£260.55 (inc VAT: £312.66)

Low Stock

SKU: EP203

C-Tec EP203 System Line Terminator

Terminates release output
Compact design
Active LED indicator

£20.08 (inc VAT: £24.10)

Low Stock

SKU: EP214

C-Tec EP203 Output Expansion Relay Board

Five relay contacts
Mounts inside EP203
Volt free relays

£70.35 (inc VAT: £84.42)

Low Stock

SKU: EP212

Kidde Commercial NC Series Conventional 3 Zone Extinguishing Panel

Kidde Commercial

Three configurable fire zones supporting up to 32 devices each
Networkable version available with support for up to 32 nodes including conventional and addressable panels
Modern design with an intuitive user interface

Haes Esprit-G Single Flood Area 3.4A Extinguishant Release Panel

Haes

Single flood area extinguishant control
Large graphical display interface
EN12094-1, EN54-2 & EN54-4 approved

£437.75 (inc VAT: £525.30)

Low Stock

SKU: ESG-1002

Kentec Sigma XT+ Extinguishant Coincidence Unit

Dual extinguishant outputs with main/reserve facility
EN12094-1, EN54-2 & EN54-4 approved
Two fully monitored coincidence inputs

£460.07 (inc VAT: £552.08)

Low Stock

SKU: K21001M2

Advanced ExGo Three Zone Automatic Gas Extinguishing Panel

Advanced

Three zone conventional detection with single flood area
Backlit 128 x 64 LCD display with digital countdown
EN12094-1, EN54-2, EN54-4 & EN54-13 approved

£542.00 (inc VAT: £650.40)

Low Stock

SKU: EX-3001

Kentec Sigma SI Extinguishant Status Indicator

BS EN12094-1 certified when used with Sigma XT control equipment
High brightness LED indication with detailed panel status
Countdown timer shows time remaining until release

C-Tec EP203 Economy Status Unit

Three LED indicators
Auto/manual keyswitch
Compact design

£61.47 (inc VAT: £73.76)

Low Stock

SKU: EP211

Kentec Sigma ZSi | ZXT Extinguishant Status Indicator | 6 LEDs, Remote Indication, Optional Control

Monitored RS485 data bus, up to 1200m
Expandable to 7 status units per system
Monitored door interlock and hold inputs

Kentec Syncro Si Addressable Extinguishant Status Unit

Reduced installation costs
Loop powered & wired directly onto either detection loop
Optional mode select keyswitch
Protected dual action manual release switch option
Robust, high quality enclosure
Only compatible with Apollo protocol Syncro XTand Syncro XT+ control Panels
Weatherproof version available

C-Tec EP203 Remote Status Unit

Remote system status display
Manual release button
Auto/manual keyswitch

Premier EX Pro Remote Status Indicator (Repeater)

Compact repeater for EX-Pro system
Maximum of 10 per system
Connects via RS485

£153.13 (inc VAT: £183.76)

Low Stock

SKU: EX-RSI

Advanced ExGo Remote Status Indicator (RSI) | Extinguishing System Repeater | Display Only or Manual Release Options

Advanced

Four model options from display-only to full manual release with mode select
RS485 network connectivity supporting up to 7 indicators per ExGo control panel
Compact 190mm x 235mm x 45mm enclosure with surface or semi-flush mounting

Zeta CP4 Gas Extinguishing Call Point

EN54-11 approved resettable manual call point in yellow
Patented spring-free mechanism mimics break glass feel
High visibility reflective flag indicator for alarm condition

£10.62 (inc VAT: £12.74)

Low Stock

SKU: ZT-CP4/Y

Zeta Gas Abort Blue Manual Call Point

Gas abort manual call point in blue housing
Single pole changeover

£14.00 (inc VAT: £16.80)

Low Stock

SKU: ZT-CP3/B

Sigma Extinguishing Hold Off Unit with Green or Red Button

Kentec Sigma XT Extinguishant Hold Off

Compatible with all EN approved Kentec extinguishing panels
Shrouded push button prevents inadvertent operation
Holds extinguishant release countdown when activated

£58.74

C-Tec EP203 Hold/Abort Button