Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional
- Photo-electric detection for smouldering fires
- Two-wire polarity insensitive supply
- Operating range -20°C to +60°C
Filters
Apollo Series 65 Conventional Heat Detector
- Wide operating voltage range 9V to 33V
- Multiple temperature variants for different applications
- Dual thermistor network with rate of rise detection
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
Apollo Orbis Conventional Optical Smoke Detector
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
Apollo Orbis Conventional Optical Smoke Detector, Non-Latching
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
Eaton Conventional Enhanced Optical Smoke Detector
- EN54-7 certified optical smoke detection
- Conventional non-addressable system compatibility
- IP40 environmental protection rating
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).