Fire Alarm Detectors
Showing 51–100 of 447 results
-
Patol EOL Terminator Box for DDL/DIM28
- Fault monitoring for open/closed circuit detection
- Multiple material options (stainless steel, aluminium, ABS, polycarbonate)
- IP65/IP66 rated enclosures for environmental protection
-
Patol EOL Terminator Box with Test Key Switch for DDL/DIM28
- Stainless steel construction
- IP65/66 ingress protection
- Fire & fault test switches
-
Patol LDM-519-LP SIL 2 Certified Analogue Linear Heat Controller
- SIL 2 certified
- Adjustable alarm set point
- LED indication of status
-
Patol LDM-519-SEN-N Analogue Linear Heat Controller
- Two level alarm set points
- LED indication of status
- Wide dc supply operation
-
Patol Resettable Analogue Linear Heat Detection Cable
- Low smoke zero halogen
- Adjustable alarm set point
- Resettable operation
-
Patol Polycarbonate EOL Terminator Box for Analogue LHDC
- Polycarbonate construction
- IP66 rated
- Easy installation
-
Patol ABS EOL Terminator Box with Fire & Fault Test Key Switch for Analogue LHDC
- ABS construction
- IP66 rated
- Fire & fault test key switch
-
Talentum Intrinsically Safe (IS) IR2 Flame Detector
- High immunity to false sources
- Tolerant of fumes and dust
- Suitable for Zone 0, 1, or 2
-
Talentum IR2 Flame Detector
- Highest immunity to false sources
- Tolerant of fumes and dust
- Detects flames through glass
-
Patol Stainless Steel L Bracket for LDHC
- Available in 30, 70 or 210mm sizes
- 20mm wide
- Stainless Steel grade 304
-
Patol P Clip with Neoprene Insulator
- Stainless steel LHDC P Clip with rubber protection
- 3mm internal diameter
-
Patol 150mm Stainless Steel Cable Tie – Pack of 100
- Stainless steel construction
- High tensile strength
- Corrosion resistant
-
Patol Polycarbonate Junction Box for LHDC
- Durable polycarbonate construction
- IP66 rated for dust and water protection
- Designed for linear heat detection cables
-
Fyreye Ultra-Violet Flame Detector
- Low profile shape
- Solar blind with electronic filter to prevent false alarms
- High immunity to electrical noise and RF interference
-
Zeta 30P Triple IR Flame Detector
- Suitable for non-hazardous areas
- Triple IR spectrum for longer distance detection & high false alarm immunity
- Typical applications include warehouses, waste disposal facilities & storage facilities
-
Zeta EX UV/IR or Triple IR (IR3) ATEX Approved Flame Detector
- Approved to ATEX by DNV for explosion-proof applications
- Choice of UV/IR or Triple IR spectrums
- Typical applications include offshore oil & gas, petrochemical & storage tanks
-
Hochiki Conventional Flame Detector
- Class 1 performance with range up to 25m
- Robust and slim design
- Approved by LPCB & VdS
-
Hochiki Industrial IR3 Infra-Red Flame Detector
- Unaffected by convection currents, draughts or wind
- Tolerant of fumes, vapours, dust and mist
- Responsive to a flame up to 25 m away
-
Hochiki Adjustable Mounting Bracket for IFD Flame Detector
- Adjustable mounting bracket for IFD flame detectors
-
Apollo Intelligent Base Mounted Flame Detector
- Responds to stationary flames with no flicker
- Sensitive to UV radiation emitted by flames during combustion
- Compact flame detector which fits into Discovery or XP95 bases
- Loop-powered
-
Apollo Intelligent Dual IR Flame Detector
- Sensitive to low-frequency, flickering infra-red radiation
- Operates with Apollo XP95 or Discovery digital protocol
- Discriminates between flames and spurious radiation sources
-
Apollo Intelligent IR3 Flame Detector
- Detects low-frequency flickering infrared radiation
- Operates effectively even with contaminated lens
- Compatible with Apollo XP95 and Discovery protocols
-
-
Apollo Orbis Deep TimeSaver Base
- Designed for easy installation of fire detection systems
- Compatible with Orbis detectors for enhanced performance
- Robust construction ensures durability in various environments
-
Apollo Orbis Sav-Wire TimeSaver Base
- Designed for easy integration with Orbis fire detection systems Robust construction for reliable performance Simplifies installation process for enhanced efficiency
-
Apollo Orbis TimeSaver Heated Base
- Maintains stable operating temperature for reliable detector performance
- Designed for use in extreme temperature conditions
- Compatible with Orbis fire detection systems
-
Apollo Orbis TimeSaver Relay Base
- Facilitates efficient communication between detectors and alarm systems
- User-friendly design for quick installation
- Reliable performance in fire detection applications
-
Firebeam Xtra Reflective Beam Detector
- 160 metre range
- Motorised alignment
- Low-level control
-
Firebeam BLUE Bluetooth Enabled Reflective Beam Detector
- Wireless Bluetooth app control eliminates wired controllers
- 160 metre range with motorised self-aligning head
- VdS approved (G221060) to EN 54-12:2015 standard
-
Fireray Hub Detector
- Motorised Auto-Alignment™ with laser assistance
- Detection range 8-120m with reflector configurations
- Building Movement Tracking™ compensation
-
Fireray Hub Reflective Beam Detector
- Detection range up to 120m with four reflectors
- Motorised Auto-Alignment™ technology
- Connects up to 3 detectors per system controller
-
Kidde Commercial Conventional Standard Base
- Easy twist and lock mechanism for detector installation
- Large rear cable entry for straightforward wiring
- Selectable locking mechanism to prevent unauthorized removal
-
Kidde Commercial Conventional Standard Diode Base
- Integrated diode for enhanced functionality
- Easy twist and lock mechanism for detector installation
- Robust design with clear terminal markings for secure wiring
-
Kidde Commercial Conventional Surface Base
- Large rear cable entry for easy installation
- Multiple conduit entry points for flexible cabling options
- Compatible with all NC-Series conventional detector bases
-
Kidde Commercial Conventional Relay Base
- Common first-fix mounting base for all white NC-Series detectors
- Single potential free contacts for easy external function control
- Selectable detector locking mechanism protects against unauthorised removal
-
Kidde Commercial Conventional Dual Relay Base
- Common first-fix mounting base for all white NC-Series detectors
- Dual potential free contacts for easy external function control
- Selectable detector locking mechanism protects against unauthorised removal
-
Kidde Commercial Conventional Reflective Beam Detector
- Adjustable sensitivity with four selectable levels for diverse applications
- Wide operating voltage range with low current consumption
- Intelligent microprocessor-based decision making for fire and fault statuses
-
Hochiki ESP Addressable Smoke Detector
- High performance photoelectric chamber eliminates ionisation sensors
- Removable chamber design for easy cleaning and maintenance
- Twin LEDs with 360° visibility in three colour options
-
Fyreye MKII Addressable Combined Smoke & Heat Detector
- Combined smoke and heat A1 detection
- 8 LEDs for 360° visibility
- EN54 parts 5 & 7 certified with LPCB approval
-
Fyreye MKII Addressable Optical Smoke Detector
- 8 LEDs for improved, 360° visibility
- Remote LED output
- Addressed with dip switches or hand-held programmer
-
CAST-PRO Smoke Detector
- Advanced algorithms for reduced false alarms
- Two detection modes for customisable sensitivity
- Onboard short circuit loop isolator for enhanced safety
-
CAST Optical Smoke Detector
- A high-quality smoke detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Smart algorithms help reduce false alarms
- Onboard short circuit loop isolator
-
Fike Sita ASD Addressable Multipoint Detector
- Multi-mode detector offering 6 detection modes
- Available with integral sounder and strobe
- Available in white or black finish
-
Nittan Evolution PY Addressable Optical Smoke Detector
- Replaces EV-P from September 2024
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-
Nittan Evolution EV-DP Dual Optical Detector
- Dual Optical Technology reduces false alarms
- Evolution FSK protocol
- EEPROM Addressed (Programmer)
- RIL and Base Control Outputs
-
Apollo XP95 Optical Smoke Detector
- Photo-electric light scatter detection principle
- Compatible with XP95, Discovery and CoreProtocol systems
- Unaffected by wind or atmospheric pressure
-
Hochiki ESP Addressable Heat Detector
- Dual detection with fixed temperature and rate of rise elements
- User selectable modes with panel-controlled operation
- LPCB and VdS approved to classes A1, B and C
-
Fyreye MKII Addressable Rate of Rise Heat Detector
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Fixed Heat Detector
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Nittan Evolution H2 Addressable Heat Detector
- Replaces EV-H-A1R & EV-H-CS from September 2024
- Choice of A1R or CS heat classes
- Backward compatible with EV-H-A1R & CS
- Evolution FSK protocol