Fire Alarm Detectors
Showing 151–200 of 447 results
-
-
-
-
25mm ABS Quick Release Airline Adaptor & Valve Kit
- 25mm quick release airline kit.
- Gives the opportunity to close the system off.
-
-
25mm or 3/4 Inch White Aspirating Pipe Clip
- ASD pipe clip.
- Suitable for 25mm or 27mm (3/4") pipework.
- Finished in white ABS plastic.
-
-
-
-
25mm Red Capillary Kit with Conical Air Sampling Point
25mm Red Capillary Kit with Conical Air Sampling Point
-
25mm Red Capillary Kit with Conical Air Sampling Point / Tee
25mm Red Capillary Kit with Conical Air Sampling Point / Tee
-
-
25mm Red Capillary Kit with Flush Air Sample Point / Tee
- 25mm Red Capillary Kit with Flush Air Sample Point / Tee
-
25mm Sight Glass Condensation Drain
- Help remove condensation from aspiration pipework.
- Suitable for 25mm pipework.
-
-
-
-
27mm ABS Quick Release Airline Adaptor & Valve Kit
- 27mm quick release airline kit.
- Gives the opportunity to close the system off.
-
27mm Red Capillary Kit with Conical Air Sampling Point
27mm Red Capillary Kit with Conical Air Sampling Point
-
27mm Sight Glass Condensation Drain
- Help remove condensation from aspiration pipework.
- Suitable for 27mm or 3/4" pipework.
-
-
3/4 (27mm) Red Capillary Kit with Flush Air Sample Point
3/4 (27mm) Red Capillary Kit with Flush Air Sample Point -
-
-
-
-
-
30 or 100cm Flexible Connector 25mm White Aspirating Pipe Fitting
- Flexible connector available in 30 or 100cm sizes.
- Suitable for 25mm ASD pipework.
- Finished in white ABS plastic.
-
90 Degree Tee 25mm White Aspirating Pipe Fitting
- 90 degree tee fitting.
- Finished in white ABS plastic.
-
90 Degree Tee 27mm or 3/4 Inch Grey Aspirating Pipe Fitting
- 90 degree tee fitting.
- Finished in grey ABS plastic.
-
-
Hochiki ACD-EN Addressable Multi-Sensor | Smoke, Heat & CO Detector
- 24 EN54-approved operational modes combining smoke, heat, CO and COHb detection
- SMART algorithm for reduced false alarms with automatic environmental adaptation
- Up to 10-year CO cell life with full monitoring and end-of-life warnings
-
Hochiki ESP Addressable Weatherproof Heat Detector
- IP67 rated for external use
- Dual heat detection elements (fixed temperature and rate of rise)
- ESP analogue addressable protocol
-
ESP FIREbeam XTRA Analogue Addressable Beam Smoke Detector
- 7-70 m standard detection range
- Extensions kits available to enhance detection range up to 160m
- Fully compatible with the Hochiki ESP analogue addressable protocol
-
Infinity ID2 Detector With Optional Integral Sounder
- 4 types of detector available
- All available with optional integral sounder
- Remote LED output
-
Black Infinity ID2 Detector With Optional Integral Sounder
- Black plastic moulding to meet aesthetical requirements
- All available with optional integral sounder
- 4 types of detector available
-
Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
-
AlarmSense Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
-
AlarmSense AlarmSense Heat Detector
- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
-
Apollo Alarmsense Integrating Optical Smoke Detector
- Responds Well to Slow Burining Smouldering Fires
- 360 Degree Visibility of LED's
- Reduces False Alarms
- Quick Simple Installation
-
Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional
- Photo-electric detection for smouldering fires
- Two-wire polarity insensitive supply
- Operating range -20°C to +60°C
-
Apollo Series 65 Conventional Heat Detector
- Wide operating voltage range 9V to 33V
- Multiple temperature variants for different applications
- Dual thermistor network with rate of rise detection
-
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
ActiV Mounting Base
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter
- C4408D diode and C4408 non-diode bases available*
- Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
-
-
Anti Ligature Smoke Detector Base Assembly
- 1mm² fire rated rated wiring
- 4 gold plated contacts
- Anti-contraband and tamper covers
- Besa box spacing for ceiling attachment
-
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.