Fire Alarm Detectors
Showing 251–300 of 452 results
-
Apollo Flame Detector Weather Shield
- Protects against water ingress.
- Protects sensor from direct sunlight.
-
Apollo Flameproof Intelligent IR2 Flame Detector
- ATEX certified for use in hazardous areas
- High sensitivity with class 1 detection capability
- Compatible with Discovery and XP95 protocols
-
Apollo Intelligent Duct Smoke Detector
- Operates in Air Speeds of 0.5m/s to 20m/s
- Transparent Cover to View Detector Head LED
- Integral Smoke Test Port
-
Apollo Intelligent Flameproof IR3 Flame Detector
- ATEX certified for hazardous environments
- Compatible with Discovery and XP95 protocols
- 90º field of view with up to 40 m coverage
-
Nittan EVC-IR | Conventional Dual IR Flame Detector | Class 1 (25m), Dual Wavelength
- Dual wavelength and flicker frequency sensing for false alarm reduction
- 100-degree supervision angle with 17m coverage at full angle
- 360-degree omni-ring LED indication with self-test glass contamination monitoring
-
Apollo Marine Isolating Base
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
- High-brightness LED
- Detects wiring short-circuits
- Minimises disruption from short-circuits
-
Apollo Orbis Conventional Optical Smoke Detector
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Conventional Optical Smoke Detector, Non-Latching
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Duct Detector
Key Features
- For use with Series 65 or Orbis detectors.
- Operates in air speeds of 0.5m/s to 20m/s.
- Transparent cover to view detector head LED.
- Integral smoke test port.
- Volt-free contacts.
-
-
Apollo Orbis Timesaver Diode Detector
- Designed for seamless integration with Orbis systems
- Simplifies installation and enhances detector performance
- Ensures reliability and compatibility with various fire alarms
-
Apollo Orbis TimeSaver Sav-Wire Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo Series 65 12V DC Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Diode Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 Sav-wire Base
- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
-
Apollo XP95 High Temperature Heat Detector
- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 I.S. Mounting Base
- Universal XPERT card addressing
- One-way fit design
- Only accepts intrinsically safe detectors
-
Apollo XP95 Intelligent Deep Base
Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.
-
Apollo XP95 Intelligent Heater Base
The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.
-
Apollo XP95 Intelligent Isolator
- Patented short-circuit detection technology
- Automatic restoration when fault cleared
- Compatible with XP95, Discovery and CoreProtocol systems
-
Apollo XP95 Intelligent Isolator Base
This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.
-
Apollo XP95 Intelligent Mounting Base in White or Black
- XPERT Addressing.
- One way fit of detector.
- Locking feature to prevent unauthorised detector removal.
-
Apollo XP95 Isolating Base
The XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.
-
Apollo XP95 Multisensor Detector
- Sensitive to a wide range of fires
- Well suited for environments such as hotel bedrooms
- Unaffected by wind or atmospheric pressure
-
VESDA-E VEP/VEU/VES Filter Cartridge
- Smart on-board filter with dust count tracking and remaining life monitoring
- Effective filtration and optical protection with clean air barriers
- Field replaceable design for minimal maintenance downtime
-
VESDA Filter Cartridge
- Easy swap replacement filter for minimal maintenance downtime
- Two stage filtration system with 99% particle removal efficiency
- Compatible with VLC, VLF, VLP and VLS VESDA detectors
-
Aspirator For VESDA VLF (LaserFOCUS) Aspirating Smoke Detector
- Replacement aspirator for the VESDA VLF (LaserFOCUS) ADS
-
Baffles For IAS Aspiration Detector
- Baffles for IAS aspiration detector.
- Version available to suit most point detectors.
-
Base for Intrinsically Safe Flame Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Base for Intrinsically Safe Smoke Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Detector Base
- Compatible with all MKII range of detectors
- 3 different types of base available
-
CAST Detector Base
- The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
- It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
- The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator
-
Dust Filter for FIRElink 25 or 100 Aspiration Detectors
- Compatible with FIRElink 25 and FIRElink 100 ASD units.
-
Eaton CAB300 Intelligent Addressable Standard Base
- First fix base.
- Loop integrity switch.
- Multiple cable entry points.
-
Eaton Cooper CAH330 Addressable Heat Sensor
- Addressable heat sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
Eaton Cooper CAP320 Addressable Optical Sensor
- Addressable optical sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
Eaton Cooper CAPT340 Addressable Photo Thermal Dual Sensor
- Addressable photo thermal ‘Dual’ sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
EatonConventional Detector Base (CDBB300)
- Quick and Easy Install
- Seprate Zone in and Zone Out Terminals
- Stand off Fixing Feature
- Selectable Detector Locking
- Accepts Side Entry Surface Cables
-
FAAST LT-200 Standalone Aspirating Smoke Detector
- High sensitivity LED Detection Chamber specially designed to cover Class C.
- Single & Dual channel version available.
- Provides pre-alarm functionality for graduated alarm thresholds.
- A single device covers up to 2,000m2 according to national design regulations.
-
Fike Sita ASD Detector Mounting Base, Pack of 5
- Mounting bases for the Fike Sita ASD addressable detectors.
- Sold in packs of 5.
-
Fireray 3000 End to End Infrared Optical Beam Smoke Detector
- Allows for 2 detectors per system controller.
- Range 5 to 120 metres, configurable per set of detectors.
- Integral laser alignment in receiver.
- 2-wire interface between controller and receiver.
- Separate fire and fault relays per detector.
-
Fireray 3000 Exd Flameproof Optical Beam Smoke Detector
- Separate transmitter and receiver unit certified to Exd.
- Allows for 2 detectors per system controller.
- Range 10 to 80 meters, (33ft to 262ft) configurable per set of detectors.
- Integral laser alignment in receiver.
-
Fireray One Auto-Aligning Beam Detector
- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
-
Fyreye Addressable Rate Of Rise Heat Detector
- Rate of rise and fixed heat detection at 57°C
- Twin LEDs for enhanced alarm indication
- DIFT approved, EN54 parts 5 & 7 compliant
-
Fyreye Extra Analogue Addressable Optical Smoke Detector
- Addressable optical detector for Zeta MK1 legacy addressable systems
- Twin LEDs to improve alarm indication
-
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.