Fire Alarm Detectors
Showing 451–500 of 535 results
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
-
Mounting Bracket For VESDA-E Aspiration Detectors
- Mounting bracket for VESDA-E aspiration detectors.
- Compatible with the VEP, VES, VEU and VEA ASDs.
-
Nittan Evolution Detector Mounting Base
- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution Detector Mounting Base with SCI Shorting Link
- Includes a shorting link to allow loop continuity testing
- Allows for ease of installation cable testing
- Low profile
-
Nittan Evolution Detector Mounting Base With Short Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution DIN Rail Mounting Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan UB-4 Standard Detector Base
- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Obscuration Test Filter for FFE Fireray Beam Detectors
- Replacment obsuration test filter for the Fireray range of beam detectors.
-
Apollo Orbis Conventional Heat Detector
- Wide range of heat detector classes for various conditions
- Rate-of-rise and static temperature detection capabilities
- Open-web casing for improved air flow and temperature measurement
-
Orbis Intrinsically Safe (IS) Galvanic Barrier
The Orbis (IS) Galvanic Barrier is installed in the safe area and ensures system integrity. -
Orbis Intrinsically Safe (IS) Heat Detector
- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) Multisensor Detector
- Reduces false alarms.
- Sensitive to fast burning, flaming fires.
- Improved sensitivity to black smoke.
- Compensation for slow changes in sensitivity.
- Algorithms for reliability of alarm.
-
Orbis Intrinsically Safe (IS) Optical Smoke Detector with Optional Flashing LED
- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- Wide angle optics respond well to a wide range of fires
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Prism For Fireray Reflective Infrared Beam Detectors
- Replacement single reflective prism for use with the Fiureray range of reflective beam detectors from FFE.
-
Prism Heater For Fireray Reflective Prisms in White or Black
- Ultra slim heating pad.
- Designed to prevent the build-up of condensation.
- For use in temperature controlled storage areas and cold environments.
-
Protective Cage for Fireray One
- Protective cage for the Fireray One beam detector.
- Suitable for use with either 1260-000 back box or to a flat surface.
-
Reflective Detector Ceiling Mount for Fireray One or Fireray 5000
- Ceiling mounting bracket for FFE reflective detector heads.
- Suitable for Fireray One or Fireray 5000.
-
Reflector Adjustment Bracket for 1 or 4 Prisms
- Prism plate and adjustment bracket for 1 or 4 prisms.
-
Reflector Wall Bracket for Fireray Prisms in White or Black
- Surface mount plate for Fireray prisms.
- Hole pattern suitable for either 1 or 4 prisms.
- Available in white or black.
-
Replacement Dust Filter for Kidde Stratos Nano, Stratos Micra 10, 25 & 100
- Compatible with Nano, Micra 10, Micra 25 and Micra 100.
- Compatible with Senator Nano, 10, 25 and 100.
- Compatible with LaserSense Nano, 10, 25 and 100.
-
Sampling Chamber For VESDA-E VEP & VEU Aspiration Detectors
- Replacement sampling chamber for VESDA-E aspiration detectors.
- Compatible with the VEP and VEU ASDs.
-
Series 65 Conventional Duct Smoke Detector
- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
System Sensor Addressable Mounting Base with Isolator
- Low profile (26mm)
- Low Current consumption (100 µA)
- Up to 99 isolators per loop
-
System Sensor B501AP Addressable Mounting Base
- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
The Blazer: Automatic Aspirating Maintenance System
- Reduces filter replacement
- Reduces the wear and tear of the ASD
- Stops the transport and lifting of vacuums and compressors
- Reduces call outs caused by flow faults
- Lowers the overall cost to maintain
-
Universal Ceiling Mount for Fireray 5000, 3000, Prism or Universal Bracket
- Universal ceiling mount for the Fireray 5000, Fireray 3000, Fireray prism or Fireray universal bracket.
- Supplied with 2 x mounting plates and 1 x blank cover plate.
-
Vesda 855 In-line Filter Element, Sold in packs of 4
- Suitable for all Xtralis Aspirating Smoke Detectors.
- Improved detector longevity in applications with high levels of air-borne contamination.
- Reduces maintenance intervals, thus reducing total cost of ownership.
- Requires no additional pipe fi ttings thus reducing cost of installation.
- Improved aesthetics.
- Vertical or horizontal mounting.
- Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors.
-
VESDA High Level Interface HLI
- Direct access and monitoring of VESDAnet system
- Seamless data transfer from your VESDAnet to your PC
- Easily configured using Xtralis configuring and monitoring software packages
- Designed for small or large networks
- VHX-0210 includes modem support for remote notification & interrogation
-
VESDA LCD Programmer
- User friendly menu system
- Supports multiple languages
- Single point access to entire VESDAnet system
- Alarm and fault simulation
- Shows wiring order
- Locates communications failures
- Password security
- Hand held or remote mounting
- Automatic Logoff when inactive
- Backlit LCD screen
-
Vesda VEA Sampling Points
- Two different types, standard and surface mount.
- Available in black or white.
- Full supervision.
- Automated cleaning by the detector.
-
Vesda Xtralis 9 Pin Serial Lead
Enter a brief description of your product here. This description will be displayed on product list pages. -
Xtralis OSID Emitter
- 150m maximum detection range
- Dual wavelength LED detection
- 90° field of view coverage
-
Vesda Xtralis OSID Acrylic Test Filter – Pack of 10
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Vesda Xtralis OSID Emitter Spare Alkaline Battery
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Vesda Xtralis Power Supplies
- Available in three sizes: 0.5 A / 7Ah, 0.5A / 14 Ah and 2 A / 38 Ah
- Temperature compensated charging to maximize battery life
- Designed to blend in with Xtralis detectors
- Knockouts designed to line up with Xtralis detectors
- External LED indication on 220E and 250E
- Internal LED indication on 215E
- Relay outputs for connection to the general-purpose input for fault monitoring.
- 230 Vac only
-
VESDA VLI Intelligent Filter
- Intelligent monitoring system with automatic replacement indication
- Drastically extends detector operational life in harsh environments
- Advanced clean-air barrier technology for consistent sensitivity
-
VESDA VLI Secondary Foam Filter
- Secondary foam filtration removes remaining contaminants after first stage
- Reduces nuisance alarms and prolongs detector life significantly
- Easy replacement design with simple screw-mounting system
-
Vesda Xtralis Refrigerated Storage Sampling Kit
- Enables the ASD pipe to be installed, inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the time.
- Suited for facilities with and without ceiling cavities
- Eliminates the need for expensive HDPE (high density polyethylene) pipe inside the Refrigerated Storage facility
- Eliminates the need for costly access equipment hire for on-going service/maintenance
- Eliminates the need for heat tracing
- Less prone to blockage due to icing
- Provides a generally more robust ASD installation for these unique environments
- Provides considerably improved aesthetics
- Minimizes the need for “Back Flush” systems
- Offers all round cost savings
-
VESDA-E VEA Filter Cartridge
- Smart on-board filter with dust count tracking and remaining life monitoring
- Effective filtration and optical protection with clean air barriers
- Field replaceable design for minimal maintenance downtime
-
Xtralis In-Line Filter
- Compatible with metric (25mm OD) and imperial (27mm/1" OD) pipes eliminating the need for pipe adaptors
- Requires no additional pipe fittings thus reducing cost of installation
- Reduces maintenance intervals, thus reducing total cost of ownership
-
VESDA-E STX Power Supply Unit
- Available in 0.5 or 2.0 amp sizes.
- Choice of matt block or silver finish.
- Designed to blend in with VESDA-E detectors.
- Knockouts designed to line up with VESDA-E detectors.
-
VESDA-E VEA Addressable Multi-way Interface, Pre-wired & Pre-addressed
- Pre-wired OEM interface assembly
- Pre-addressed pipe relays as per client specification
- Supporting the major addressable fire alarm protocols
- Full functional and 24 hour soak test prior to delivery
- Easy installation reducing overall completion time
-
Wagner Titanus Micro Sens With Optional Room Identification
- The primary alarm can be set to sensitivity levels as high as 0.1 % obs./m.
- This air sampling smoke detector’s 40 to 50m-long pipe system can have up to eight air sampling points (5 with ROOM·IDENT).
- The TITANUS MICRO·SENS® has a wide range of options, so it can be customised to any number of situations.
- A second detector module can be incorporated to create a dual detector dependency configuration.
- Special versions are available for deep-freeze facilities (temperatures as low as -40 °C) and noise-critical areas (to 23 dB (A)).
- The plug-and-play system makes the air sampling smoke detector quick and easy to install.
- Maintenance work can be performed without entering the protected area.