Fire Alarm Detectors
Showing 401–450 of 535 results
-
Fireray One Auto-Aligning Beam Detector
- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
-
Fireray Reflector Long Range Ceiling Mount
- Long range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
- For use with four reflectors.
-
Fireray Reflector Short Range Ceiling Mount
- Short range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
-
Four Prism Plate For Use With FFE Universal or Adjustment Bracket
- Four prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
Fyreye Common Base
The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.
-
Fyreye Deep Common Base
Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.
-
Fyreye Diode Base
The Fyreye diode base is used on systems that do need line integrity on head removal. This would include all conventional systems that mix detectors & call points on the same line.
-
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Detector Base – Black
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Diode Base
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Diode Base in Black
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Isolator Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
-
Fyreye Relay Base
The Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Obscuration Test Card Kit For Beam Detector
- Manufacturer: Gent by Honeywell
- Obscuration Test Card Kit
- For Use With Beam Detectors
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
Hochiki CDX Conventional Mounting Base
- Integral remote indicator output
- Low profile, only 8 mm
- Rugged design and electronics free
-
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki CDX Conventional Photoelectric Smoke Detector
- Removeable High Performance Chamber
- Remote Indicator Output
- Low Profile Design
- Available in White
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki DIN Mounting Box Small or Large
- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
ICAM IAS / ILS Coarse Filter Replacement Filter Element, Pack of 10
- Replacement coarse filter for ICAM IAS or ILA units.
- Sold in packs of 10.
- Available in Black or White.
-
ICAM IAS / ILS Fine Filter Replacement Element, Pack of 10
- Replacement fine filter for ICAM IAS or ILA units.
- Sold in packs of 10.
-
ICAM ILS Dual Channel Air-Sampling Smoke Detector
- Dual channel smoke detection
- Laser air-sampling smoke detection
- Up to 18 holes per channel (Class C)
-
Intelligent Auto-Aligning Beam Detector
- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified
-
Kidde Airsense – Dust Separator Cartridge
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kidde Airsense – Stratos-HSSD Dust Filter
- Stratos-HSSD Dust Filter Cartridge is for the Stratos-Standard HSSD Detector.
-
Kidde Airsense Dust Filter for Stratos-Quadra
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kidde Replacement Filter for HSSD2 and ModuLaser
- Compatible with both Modulaser and HSSD2.
- Additional sponge to improve functionality and usability.
-
Zeta Long-Range Flame Simulator for Flame Detector Testing
- Extremely long range fire simulating (<30m for Triple IR(IR3) or <15m for UV/IR)
- Safe testing without the need to ignite a dangerous real flame fires
- Suitable for both hazardous area and non-hazardous areas
-
Marine Intelligent Base Mounted UV Flame Detector
- Responds to stationary flames with no flicker
- Sensitive to UV radiation emitted by flames during combustion
- Compact flame detector which fits into Discovery Marine base
- Loop-powered