Fire Alarm Detectors
Showing 301–350 of 447 results
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Eaton Conventional Enhanced Optical Smoke Detector
- EN54-7 certified optical smoke detection
- Conventional non-addressable system compatibility
- IP40 environmental protection rating
-
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Hochiki DCD-AE3M / DCD-CE3M Marine Approved Combined Heat Detector
- Electronic linear heat detection
- Fixed 60°C and 90°C versions available
- Wide voltage range (9.5 ~ 30 V dc)
- Approved by LPCB
- Approved to MED by GL
- GL Type approval
-
Hochiki DIN Mounting Box Small or Large
- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
ICAM IAS / ILS Coarse Filter Replacement Filter Element, Pack of 10
- Replacement coarse filter for ICAM IAS or ILA units.
- Sold in packs of 10.
- Available in Black or White.
-
ICAM IAS / ILS Fine Filter Replacement Element, Pack of 10
- Replacement fine filter for ICAM IAS or ILA units.
- Sold in packs of 10.
-
ICAM ILS Dual Channel Air-Sampling Smoke Detector
- Dual channel smoke detection
- Laser air-sampling smoke detection
- Up to 18 holes per channel (Class C)
-
Intelligent Auto-Aligning Beam Detector
- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified
-
Kidde Airsense – Dust Separator Cartridge
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kidde Airsense – Stratos-HSSD Dust Filter
- Stratos-HSSD Dust Filter Cartridge is for the Stratos-Standard HSSD Detector.
-
Kidde Airsense Dust Filter for Stratos-Quadra
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kidde Replacement Filter for HSSD2 and ModuLaser
- Compatible with both Modulaser and HSSD2.
- Additional sponge to improve functionality and usability.
-
Zeta Long-Range Flame Simulator for Flame Detector Testing
- Extremely long range fire simulating (<30m for Triple IR(IR3) or <15m for UV/IR)
- Safe testing without the need to ignite a dangerous real flame fires
- Suitable for both hazardous area and non-hazardous areas
-
M6 Nut (for fitting clip to end of threaded rod)
M6 Nut (for fitting clip to end of threaded rod)
-
M6 Rod adaptor (for fitting clip to side of rod)
M6 Rod adaptor (for fitting clip to side of rod)
-
M8 Nut (for fitting clip to the end of threaded rod)
M8 Nut (for fitting clip to the end of threaded rod)
-
M8 Rod adaptor (for fitting clip to side of rod)
M8 Rod adaptor (for fitting clip to side of rod)
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Marine Series 65 Mounted UV Flame Detector
The Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
-
Morley IAS MI-FHSE-S2 Fixed Heat Detector 58C
- Tri colour LED offering red, green and amber colour
- Rotary decade address switches 0 - 159
- Pure white colour to complement modern buildings
- 100% mechanical and electrical backwards compatibility
- New base design to complement the detector
-
Morley-IAS MI-PSE-S2 Intelligent Optical Smoke Detector
- New mechanical platform with revolutionary chamber offering improved false alarm immunity.
- Tri colour LED offering red, green and amber colours.
- Pure white colour to compliment modern buildings.
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Combined Optical Smoke & Heat Detector
- Optical Smoke and 54°C (A1R) Heat Sensors in one housing.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality
-
Kidde Commercial Conventional Optical Smoke Detector
- Programmable smoke sensitivity levels for tailored detection
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility for easy status monitoring
-
Kidde Commercial Conventional Heat Detector
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility with a 360° viewing angle
- Three programmable operating levels for versatile applications
-
Kidde Commercial Conventional Multisensor Detector
- Integrated photoelectric and heat detection technology
- Programmable smoke sensitivity levels for enhanced adaptability
- All-round LED visibility for easy status indication
-
Nittan Evolution Detector Mounting Base
- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution Detector Mounting Base with SCI Shorting Link
- Includes a shorting link to allow loop continuity testing
- Allows for ease of installation cable testing
- Low profile