Addressable Panels

• Enable/disable controls.
• Group isolate to disable I/O across network.
• For use to start/enable a class change.
• Trapped and un-trapped key switches available.
• Control of multi-sensor/device sensitivity mode change.
• Simple to install and configure.

• 16 Zone requires - 2 x 12V 3.2Ah VRLA connected in series
• 32 Zone requires - 2 x 12V 7Ah VRLA connected in series

• RS232 or RS485 communications card

• Replacement spares pack for the CIE-A-200 panel.

• Allows a pair of 12ah batteries to be used with CIE-A-200 or CIE-A-400 panel.

• Allows CIE-A-200 to be flush or recess mounted.

• Internal printer kit for Morley ZX5e panel
• Provides 40 character printer output

• Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
• Full colour printing.
• Available in a range of standard enclosures to suit any applications.
• Bespoke sized units can be made upon request.
• Choice of Red, Green or Yellow LED’s.
• Available with or without controls.

• Matches design & colour scheme for standard Sigma CP/XT & Syncro AS control panel ranges.
• Compatible with Syncro & Taktis fire panels.
• Easy to install.
• Front loading printer for quick and easy paper changes.

• 4 Monitored Detection Zone Inputs
• 2 Monitored Sounder Outputs
• Direct Replacement for Conventional Control Panel for integration in to an addressable System

• 6 Individually Fised and Monitored Sounder Outputs
• Fault and Operated Indications
• Common Footprint to other Syncro I/O
• Compatible with Syncro AS Panels

• 8 Volt Free Changeover Relay Contacts
• Common Footprint to Other Syncro I/O
• Compatible with Syncro AS Panels

• Matching design & colour scheme for Kentec new style control panel range.
• Easy to install.
• Incorporates Kentec's 'Quick Fit' lid & equipment chassis.
• Front panel mounted status LED indication.
• Space for 3.2Ah batteries.
• Choice of power supplies.

Semi Flushing Collar for M2 Sized Enclosure 

• 24 programmable LEDs.
• Up to 16 x 24 way Addressable Ident can be connected to each fire panel.
• Programmable flashing or steady states.
• Red, yellow or green indications/ options.
• Common Fire, Fault and Disabled indication.
• Customisable label identification tags.

• High Integrity Protocol
• Simple 2-wire Loop Connection
• Repeaters Share Network Connection
• Flexible Configuration Option

• 16 Channels
• Simple two-wire Connection to Control Panel
• Full Cause and Effects
• Compatible with Syncro AS Panels

• Semi Flushing Bezel for M1 Sized Enclosure

Semi Flushing Bezel for M3 Sized Kentec Panels

• 20 or 60 zone LED dispay card