Fire Alarms
Showing 1345–1368 of 2001 results
-
Apollo XP95 I.S. Heat Detector
- Intrinsically safe for hazardous environments
- Linear temperature detection 25°C to 90°C
- XP95 native digital communication protocol
-
Apollo XP95 I.S. Galvanic Barrier
- Single channel loop-powered isolated barrier
- SIL3 safety integrity level certification
- ATEX, IECEx, FM and UL approved for hazardous areas
-
Apollo XP95 I.S. Protocol Translator
- XP95 and Discovery compatible communication
- Available in single or dual channel configurations
- Loop-powered device with transparent operation
-
Hochiki Intrinsically Safe Conventional Rate of Rise Heat Detector
- Twin fire LEDs for 360° viewing
- Electronics-free mounting base
- ATEX classification for intrinsic safety
-
1 Gang 25mm Deep Patress Box
1 Gang 25mm Deep Patress Box for use with the Single Gang Emergency Light Test Switch (CMA110).
-
10 Inch Intrinsically Safe Gong Bell
Enter a brief description of your product here. This description will be displayed on product list pages.
-
140 or 160m Range Extension Kit For Firebeam Xtra
- Range extension kit for the Firebeam Xtra.
- Available with eitehr 140 or 160m range.
-
2-Way Programmable Relay Card For Advanced MxPro 5
- Each output individually programmable.
- Cost effective against ancillary hardware.
- Each output 30V AC/DC, 1 Amp rating.
-
-
3 Prism Long Range Kit For Fireray Reflective Infrared Beam Detectors
- Additional 3 prism kit to extend range of Fireray One to 120m.
-
ACT 1345 Sound Level Meter
- Wide dynamic range from 30 to 130dB
- IEC651 Type 2 and ANSI S1.4 Type 2 compliant
- A and C frequency weightings
-
ACT 1414 24V Spike Suppressor
- Protects fire alarm system from induced AC and nearby lightning
- Decouples induced AC from every alarm cable connected to the control panel
- Clamps the 24VDC supply against spikes
-
ACT 230MSF 230V EMI RFI Mains Filter
- Prevents false alarms from EMI/RFI interference
- Lightning protection for security equipment
- 3 amp maximum current rating
-
ACT 2323 230V Mainspike Suppressor
- Provides up to 4,500 Amp continuous spike protection across live, neutral and Earth.
- Protects against nearby lightning causing false alarms and system malfunctions.
- Protects all security and fire alarm panels, CCTV cameras, access control equipment and security lighting.
-
-
ACT 415B Premium Multimeters Test Leads
- Premium test leads to suit most multimeters.
- Replacement leads for ACT/6000.
- Moulded PVC constuction with highly flexible, tangle resistant silicone cable.
- 4mm right angle plugs.
- Insulated test probes - gold plated.
- CAT IV rated.
- Overall length 1.2m.
-
ACT 418 Professional Multimeters Test Leads
- Professional test leads to suit any multimeter.
- Suitable for for ACT/6000.
- Constructed of highly flexible silicone cable.
- Retractable 4mm Plugs.
- Fully Insulated Probes with Attachable Crock-Clips.
- Overall length 1.2m.
-
ACT 6000 Alarm Engineers Autoranging Digital Multimeter
- Fully autoranging.
- Both AC and DC voltage measurement.
- Three ranges are provided for current measurement of either AC or DC current.
- Simple operation.
-
ACT 612 6V or 12V Intelligent Battery Tester
- Test SLA, GEL & FLOODED.
- For 6V & 12V battery models.
- Simple Operation.
- DC Voltage and Ah Capacity Results.
- When to Recharge or Replace.
-
ACT Battery Tested Labels, Roll of 250
- Each roll contains 250 labels
- Insertions for Temperature, Volts, Ah Readings, User Initials and Date Tested
-
ACT CPS3 Fire Alarm Control Panel Suppression Kit
- Protects metal fire alarm control panels from EMI, RFI and nearby lightning.
- Recommended to fit this kit as standard on all take-overs.
-
Addressable Maxitone Sounder Red or White
- Available in Red Or White
- 2 Available Tones
- Addressable
- IP65 Ingress Protection
-
Adjustable Wall Bracket For The Firebeam & Zeta Beam Detector
- Dual axis swivel joints mean total flexibility in aligning beam and reflectors.
- High quantiy steel consruction.
-
