Fire Alarms
Showing 101–150 of 1944 results
-
Hochiki DCD-AE3M / DCD-CE3M Marine Approved Combined Heat Detector
- Electronic linear heat detection
- Fixed 60°C and 90°C versions available
- Wide voltage range (9.5 ~ 30 V dc)
- Approved by LPCB
- Approved to MED by GL
- GL Type approval
-
Kentec Sigma CP Conventional 2, 4 or 8 Zone Panel
- Fully certified to BS EN54-2 and BS EN54-4
- 2, 4 or 8 version zones
- Surface and Flush Mounting Options
-
Large Property Fire Alarm Kit — Battery (Grade F1)
A complete, fully wireless battery-powered fire alarm kit for three-storey homes and larger properties. -
M2 3A Fused Spur Fire Alarm Isolator Keyswitch
- Double pole key operated switch
- 13A fuse fitted as standard
- Neon indicator
- Printed "FIRE ALARM"
- Knock outs in all sides and base
- Fitted earth terminal in base capacity 2.5mm²
-
Pink Sleeving For Functional Earths
- High-grade thin wall PVC
- Continuous 100m coils
- Self-extinguishing flammability
-
Premier EX Pro Output Expansion Relay PCB
- Expansion board with either 3 or 8 voltage-free changeover relay contacts
- Mounted inside Premier Ex Pro panel
-
SmartCell Panel Communications Module V2
- Multi-network cellular connectivity (2G/3G/4G)
- Remote SMS and email notification capability
- Internal SmartCell panel integration
-
Solo 814 6m Smoke & Mains Heat Detector Test Set
- Smoke & heat detector testing plus head removal kit
- 6m reach
- Aerosol based tester canisters
-
System Sensor M5A-RP02FF-K013-01 | Addressable Manual Call Point | Flush, Flexi, Built-in Isolation
- Built-in isolation for loop integrity protection
- Flush mount with flexible (resettable) operating element
- EN54-11 approved with Advanced Protocol embedded
-
Advanced MxPro 5 – 8 Loop Panel
- Expandable from 2 to 8 loops
- Advanced graphical LCD user interface
- Compatible with AdvancedLive for secure monitoring
-
C-Tec EP203 Automatic Extinguisher Panel
- Three zone panel
- 128 x 64 pixel display
- EN54-2/4 certified
-
Eaton Flexi BiWire or Conventional Panel
- Configure zone wiring to work as either a conventional or two-wire system
- Allows the connection of an existing conventional system to a BiWire system
- Compatible with two-wire and conventional EN 54-23 certi ed visual alarm devices (VADs)
-
Eaton MRIAD Intelligent Addressable Loop Connected Remote Indicator
- Loop powered.
- Soft addressed.
- Integral short circuit Isolator.
- Single address.
- High visibility LED.
- Can be programmed to monitor multiple remote sensors.
-
Elmdene STX 24V DC STX Power Supply, Maximum 17Ah Batteries
- EN54 PSU with choice of 2, 5 or 10A output
- Enclosure fits up to 2 x 17Ah 12V batteries
-
EMS FireCell Hardwired Network Card for Syncro AS Panel
- Up to 64 nodes supported for extensive system scalability
- High integrity protocol ensures secure operation against short or open circuit faults
- Simple 2-wire loop connection, fault-tolerant design, and support for open-ended networks make it ideal for retrofit applications
-
-
Gent NANO-24 | Single Loop Addressable Fire Panel | Compatible with S-Quad & S-Cubed
- Single loop supporting 127 addressable devices
- Compatible with S-Quad and S-Cubed loop-powered devices including EN54-23
- USB commissioning tool for offline or online configuration
-
Haes Esento Excel Sav-Wire or Conventional Panel
- 2-12 zones
- Individually selectable Twin Wire zones
- Network up to 8 control panels
-
Haydon HAY-FIRE-ISO | Double Pole Fire Isolation Switch | F4A Fuse, 80A Surge Rating
- Supplied with 2 keys for secure isolation
- Fuse fully disconnects supply in OFF position
- Compact ABS enclosure for easy panel-side mounting
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Large Property Fire Alarm Kit — Mains (Grade D1)
A complete mains-powered fire alarm kit for three-storey homes and larger properties. -
Notifier NFXI-OPT Opal Addressable Smoke Detector
- Built in short circuit isolation.
- New advanced Opal protocol allows mapping of the loop for precise fault location using isolators.
- Tri colour LED offering red, green and amber colours.
- Rotary decade address switches.
-
SmartCell Ancillary Box | Enclosure for External Comms Card
- External housing for SmartCell communications cards
- Compatible with SmartCell CIE fire control panels
- Compact dimensions: 275mm × 150mm × 78.5mm
-
Solo 822 6m Smoke & Cordless Heat Detector Test Set
- Smoke & heat detector testing plus head removal kit
- 6m reach
- Aerosol based tester canisters
-
Advanced 1.5A, 3A or 5A Boxed Power Supply With Battery Charging
- EN54-4 certified fire alarm power supply
- Available in 1.5A, 3.0A and 5.0A outputs
- High efficiency switch mode technology
-
-
EMS FireCell Syncro AS Radio Network Communicator
- Efficient power usage with low current consumption.
- Built on proven and reliable EMS technology with cutting-edge components.
- Allows up to 16 RNCs per network, compatible with FireCell Syncro AS, Syncro, and Taktis Control Panels.
-
Esento Eclipse Conventional or Save-Wire Panel
- 2 or 4 zones
- False alarm management
- Twin Wire selection
-
Evacuator Synergy RF Base Station with First Aid
- Independently tested to ETSI-300-220-1 standards.
- Completely wireless operation with a simple 'plug and play' installation.
- 40 addressable zones for efficient emergency management.
-
Fike Twinflex Pro 2, 4 or 8 Zone Fire Alarm Panel
- 2 wire system (detectors, sounders & call points wired on the same zone wiring)
- Available in 2, 4 or 8 zone version (4 zone can be expanded to 8)
- LCD display allowing zones to be labeled (“Ground Floor”, “1st Floor”, etc)
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
-
KAC Indoor Single Pole Keyswitch
- Indoor keyswitch with single pole relay.
- Option of 2 or 3 position keyswitch.
- Option for key to be trapper or un-trapped.
-
Medium Property Fire Alarm Kit — Mains with Wireless Interlink (Grade D1)
A complete mains-powered fire alarm kit for two-storey homes (typically 2–3 bedrooms), with wireless interlink included. -
Notifier PRL-LED-EN | 2-Loop Intelligent Addressable Fire Alarm Control Panel | 64 Zone, Opal Protocol, Networkable
- 2-loop intelligent addressable system with Opal protocol
- Up to 636 loop devices (159 detectors + 159 modules per loop)
- Networkable up to 16 panels controlling 10,000+ devices
-
SAP CAST 1 Loop Sprinkler Panel
- Monitors up to 255 sprinkler flow switches
- Up to 16 assignable sprinkler zone indicators
- Attractive flush or surface mountable design
-
SmartCell Wireless Dual Smoke & Heat Detector Only
- Flexible detection; smoke and/or heat
- Unique design
- Inbuilt locking mechanism
-
Solo 823 9m Smoke & Cordless Heat Detector Test Set
- Smoke & heat detector testing plus head removal kit
- 9m reach
- Aerosol based tester canisters
-
Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call Point
- Reliable single action manual call point for surface and flush mounting
- Dual, tri-colour status indicators offers 180° alarm visibility
- Tamper resistant design with resettable or frangible element
-
C-Tec EP203 Output Expansion Relay Board
- Five relay contacts
- Mounts inside EP203
- Volt free relays
-
Eaton Cooper MBG817 Weatherproof Addressable Manual Call Point
- Weatherproof manual call point suitable for outdoor applications.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Fast fit clip on front cover.
- High visibility status LED.
- Wide range of accessories.
- Heavy duty terminals.
-
Eaton xDetect EFXD02002 | 1-2 Loop Mini Addressable Fire Panel | Touchscreen
- 1-2 loop addressable control panel with integrated emergency power supply
- Intuitive 7-inch colour touchscreen with adaptive status-based display
- Industry-leading cybersecurity with future-ready BMS and IoT connectivity
-
EMS FireCell Syncro 4 Way Conventional Detection Zone Module
- 4 monitored detection zone inputs
- 2 monitored sounder outputs
- Volt free fire contact
- Volt free fault contact
-
Evacuator Synergy RF Call Point
- Now supplied with the extended life “Blue Battery pack”
- Evacuator Synergy RF manual call point
- 40 addressable devices
-
-
Fyreye MKII Addressable LED Remote Indicators
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Isolatable Timer Relay | 24V DC with Key Switch | Adjustable Delay (0-5 Mins) | Red Boxed
- Adjustable 0-5 minute timer delay with visual LED indication
- Keyswitch isolation prevents unwanted activation during testing
- Dual trigger inputs: 24V DC or fire alarm bell circuit
-
Kentec Sigma CP-A AlarmSense 2, 4 or 8 Zone Panel
- Apollo AlarmSense 2-wire control panel
- Available in 2, 4 or 8 zone sizes
- Available in Surface or Flush Mounting Options
- Auxillary power supply
-
Large Property Fire Alarm Kit — Mains with Wireless Interlink (Grade D1)
A complete mains-powered fire alarm kit for three-storey homes and larger properties, with wireless interlink included. -
Marine Series 65 Mounted UV Flame Detector
The Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
