Fire Alarms
Showing 251–300 of 1944 results
-
EMS FireCell FC-2X-AT-FR-FB-S-99 | 2X-A Touchscreen Repeater | Network Card Included, Small Cabinet
- 7" touchscreen interface providing intuitive navigation and enhanced user experience compared to standard jog dial control
- Network repeater panel with fire brigade controls and FC-2010-2-NB network board pre-fitted
- Compact small cabinet design (409 x 285 x 154 mm) ideal for high-visibility monitoring locations
-
Evacuator Synergy+ Base Station, Mains Powered
- First Aid Call function for immediate assistance.
- Mesh Radio connectivity with a 2km line of sight range.
- Mains Powered for reliable and continuous operation.
-
Fyreye MKII Addressable Optical Smoke Detector
- 8 LEDs for improved, 360° visibility
- Remote LED output
- Addressed with dip switches or hand-held programmer
-
Hochiki ESP Addressable Blue Manual Call Point with SCI
- Fast response
- Integral short-circuit isolator
- Bi-coloured status LED
-
IP65 Weatherproof 24V Power Supply
- IP65 rated PSU suitable for outdoor applications.
- Optional battery charging.
- Options fault outputs.
-
JSB FX2200 2 or 4 Zone Conventional Panel
- 2 or 4 zones panels
- Flexible, high specification system
- Simple “one-shot” auto-reset user test facility
-
Kentec Syncro Si Addressable Extinguishant Status Unit
- Reduced installation costs
- Loop powered & wired directly onto either detection loop
- Optional mode select keyswitch
- Protected dual action manual release switch option
- Robust, high quality enclosure
- Only compatible with Apollo protocol Syncro XTand Syncro XT+ control Panels
- Weatherproof version available
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
SmartCell Wireless Door Holder in Black or White
- Combines industry-proven mechanics with SmartCell wireless technology
- Quick and easy installation with individual addressing at the SmartCell Control Panel
- Fully controlled by the fire system, operating on the 868 MHz European harmonized frequency band
-
Wisualarm Wi-Fi Smoke Alarm
- Split-spectrum sensor technology
- Loud sound output over 85 dB(A) at 3 meters
- Notifications sent to mobile phones through wireless network
-
XTR2 AJAX-ADAP | XTR2 Adaptor for Ajax Smoke/Heat Detectors
- Only AJAX-approved test adaptor for EN54 detector range
- Compatible with XTR2 cup — enables smoke and heat functional testing
- Quick-fit design replaces standard XTR2 membrane with no tools required
-
Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional
- Photo-electric detection for smouldering fires
- Two-wire polarity insensitive supply
- Operating range -20°C to +60°C
-
-
C-Tec EP203 Remote Status Unit
- Remote system status display
- Manual release button
- Auto/manual keyswitch
-
Eaton CBG370S | Intelligent Addressable Call Point | Surface/Flush Mount, Built-in Isolator
- Soft addressed with integral short circuit isolator for simplified commissioning
- Fast fit clip-on cover with dual function test key for rapid installation
- Surface or flush mounting with IP42 protection and BESA rear fixing
-
EMS FireCell Radio Hub
- Smart Cluster Technology for efficient wireless communication
- Internal diversity aerials for enhanced signal reception
- Dual-band 868MHz operation with support for up to 504 wireless FireCell devices
-
Evacuator Synergy+ Battery Pack, 4.5v
- Ideal replacement for Evacuator Synergy+ wireless devices
- Approximately 3 years lifespan in standby mode
- Specifically designed for the Evacuator Synergy+ Range
-
Fyreye MKII Addressable Fixed Heat Detector
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Identifire 12 or 24V Single Gang Power Supply
- Works at 12 or 24 V dc selectable via link.
- Consistent Identifire design.
- Can be surface or flush mounted.
- Bright green LED power indicator.
- PCB cover to protect users from mains voltage.
-
Infinity ID2 Detector With Optional Integral Sounder
- 4 types of detector available
- All available with optional integral sounder
- Remote LED output
-
JSB FX2200 Conventional Fire Repeater Panel
- Flexible, High Specification System
- Simple Auto-Reset User Test Facility
- Class Change and Programmable Fire/Fault Relay
- Third Party Approved
-
SmartCell Lite Wireless Survey Kit | Site Survey Tool in Flight Case | Includes Control Panel, 1 Device, Battery Pack & Access Pole
- Complete survey solution in portable flight case
- Includes panel, detector, battery pack and access poles
- Cost-effective wireless site assessment
-
Solo 230 | Ajax Head Removal & Survey Tool
- Specialist Ajax fire detector removal tool — reduces ladder use
- Compatible with Solo access poles for ceiling-height reach
- Supports removal, replacement and survey workflows
-
System Sensor Low Profile Addressable Optical Smoke Sensor
- Low profile System Sensor optical smoke detector.
- Revolutionary chamber offering improved false alarm immunity.
-
Wisualarm Mains Smoke Alarm with 9V Battery
- Split-spectrum sensor technology
- Built-in replaceable 9V battery back-up
- Hardwire and wireless interconnection up to 24 units
-
ADP324-FR 24V DC Power Supply Unit
- 24V DC 500mA switch mode power supply
- Microprocessor controlled with battery monitoring
- Twin independent switched outputs
-
Apollo Discovery Optical Smoke Detector
- Photo-electric detection ideal for slow burning and smouldering fires
- Five EN54 approved response modes for flexible sensitivity settings
- Digital communication compatible with Discovery, XP95 and CoreProtocol systems
-
C-Tec XFP501/PSU | Replacement Power Supply Unit | 24V 3A, For XFP Panels
- 24V 3A switch mode power supply
- EN54-2/4 LPCB third-party certified
- Compatible with full C-TEC XFP panel range
-
CAST-PRO Smoke Detector
- Advanced algorithms for reduced false alarms
- Two detection modes for customisable sensitivity
- Onboard short circuit loop isolator for enhanced safety
-
EMS FireCell FC-000-HUB | Radio Hub Programming Lead | 1.75m Length
- Dedicated programming lead for EMS FireCell radio hubs
- 1.75m cable length for flexible installation access
- Compatible with the full FireCell range of radio hubs
-
Evacuator Synergy+ Call Point
- Up to 3 years Battery Life for prolonged reliability
- Totally wire-free operation with Mesh Radio connectivity
- Combined Sounder and Strobe for effective alerting
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
-
Kentec Sigma CP-R Conventional 2-8 Zone Repeater Panel
- Two-Wire Serial Connection
- Up to 7 Panels Per System
- Full Control Over Main Panel
- 1.2mm Mild Steel Construction
-
Premier EX Pro Remote Status Indicator (Repeater)
- Compact repeater for EX-Pro system
- Maximum of 10 per system
- Connects via RS485
-
Smartcell Wireless Survey & Demo Kit
- SmartCell survey and system demonstration kit
- Supplied in a durable flight case
- Includes wireless control panel with mains charger
- Includes six wireless SmartCell devices
-
System Sensor Addressable Indoor Manual Call Point
- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
Testifire TESTIFIRE-FA-001 | XTR2 Heat Detector Adaptor | For Testifire XTR2 Systems, Field Maintenance
- Dedicated heat detector adaptor for XTR2 systems
- Designed for field maintenance and compatibility with XTR2 test heads
- Single-function adaptor — heat only, no smoke or CO capability
-
Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
-
Wisualarm Wireless Interconnected Module
- Compatible with Wisualarm mains powered alarms
- Wireless interconnected with maximum of 24 WisuLink RF devices
- RF mesh interconnected architecture
-
Advanced ExGo Remote Status Indicator (RSI) | Extinguishing System Repeater | Display Only or Manual Release Options
- Four model options from display-only to full manual release with mode select
- RS485 network connectivity supporting up to 7 indicators per ExGo control panel
- Compact 190mm x 235mm x 45mm enclosure with surface or semi-flush mounting
-
Dycon DX24 1, 2 or 3 Amp Magnetic Fire Door Holder Power Supply
- 24V DC switched-mode power supply.
- 1, 2 or 3 amp models available.
-
EMS FireCell Radio Cluster Communicator
- Smart cluster technology
- 32 radio channel selection
- Up to 31 FireCell devices per RCC
-
Evacuator Synergy+ Call Point with First Aid
- Up to 3 years of battery life for prolonged reliability.
- First Aid Call function integrated for swift emergency response.
- Totally wire-free operation with mesh radio connectivity, ensuring compliance and ease of use.
-
Fike Multipoint ASD Head Removal Tool
- Head removal tool for the Twinflex ASD and Sita ASD addressable detectors
- Compatible with Solo extension poles
-
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
-
Morley-IAS MI-PSE-S2 Intelligent Optical Smoke Detector
- New mechanical platform with revolutionary chamber offering improved false alarm immunity.
- Tri colour LED offering red, green and amber colours.
- Pure white colour to compliment modern buildings.
-
Nittan Evolution H2 Addressable Heat Detector
- Replaces EV-H-A1R & EV-H-CS from September 2024
- Choice of A1R or CS heat classes
- Backward compatible with EV-H-A1R & CS
- Evolution FSK protocol
-
Notifier PRL-LED-EN-1 | Intelligent Addressable Fire Alarm Control Panel | 1 Loop, 64 Zone, Networkable
- Single loop intelligent addressable fire alarm control panel
- Supports up to 159 detectors and 159 modules per loop
- Networkable up to 16 panels controlling over 10,000 devices
-
QuickZone 2 or 4 Zone Conventional or Sav-Wire Panel
- 2 or 4 zones.
- DIL selectable conventional or twin-wire (savwire) set up.
- Class change and alert inputs.
- Fire and fault relays.
- 2 monitored sounder circuits.
- 1 Amp switch mode PSU.
- Space for up to 3.2Ah batteries.
- False Alarm management.
- Approved to EN54 2 & 4.
- 3 year warranty.
-
Red 25mm ABS Aspirating Pipe 2.4 Metre Length
- 2.4 metre length of 25mm diameter red ABS pipe
- Manufactured to EN 54-20 standard for aspirating systems
- Compatible with all major ASD systems including VESDA