Fire Alarms
Showing 51–100 of 1944 results
-
C-Tec XFP Addressable Fire Alarm Panel
- LPCB certified to EN54-2 & 4 for compliance assurance
- Multiple protocol compatibility options (Hochiki ESP or Apollo XP95/Discovery)
- Scalable loop configurations from 1-2 loops and 16-32 zones
-
Eaton CAP320 | Addressable Optical Smoke Sensor | Fastest Smoke Response, 360° LED Visibility
- Integral short circuit isolator - no separate isolator base needed
- Auto (soft) addressing for fast loop commissioning
- Drift compensation maintains sensitivity as the chamber collects dust
-
Economy Fire Alarm Mains Safety Isolator Switch (Surface or Flush)
- Compliant mains safety isolator keyswitch for fire alarm systems.
- Meets the reuirements of BS 5839 Pt.1 2013.
- Double pole isolation (both live & neutral supply is switched).
-
EMS FireCell Syncro AS 1 Loop Networkable Panel & Radio Hub Kit
- FireCell starter kit with 1 loop networkable Syncro AS panel and radio hub
- Ideal starting kit for non-networked FireCell system
-
GEMINI Battery Powered Fire Alarm
- All-in-one unit with integral call point, battery and 105dB sounder
- Battery powered with 12 month life expectancy and fault monitoring
- Expandable system linking up to four units together for larger coverage
-
Hispec HSA/BC/10 | Battery Operated Carbon Monoxide Detector | 10 Year Lithium Battery, Electrochemical Sensor, 85dB Alarm
- Built-in test and hush/silence buttons
- Dual BS EN 50291 approval for domestic and leisure use
- Rapid alarm response at high CO levels
-
Infinity iD2 System Configurator
- Build complete Infinity iD2 systems with compatible panels, detectors and sounders
- Add a fully configured system, or simply choose the components you need
- Add installation accessories and maintenance essentials all in one place
In Stock
This item is not available to purchase online.SKU: infinity-system-configuratorRead more
Infinity ID2
Infinity ID2 System Configurator
Build a complete Infinity ID2 system by selecting the required components below. Compatible items only. Alternatively, choose only the components...
-
Infinity8 Conventional Fire Alarm Panel
- Optional 24V aux supply (4-8 zone versions only)
- Optional non-latching zone
- Fault relay can be configured as 2nd fire relay
-
Kentec Sigma XT Ancillary PCB
- 24V DC powered boxed ancillary board
- Two-wire serial RS485 connection with additional power cores
- Volt-free relay outputs for remote subsystem control
-
Kidde NC Series 2-8 Zone Conventional Fire Panel
- Supports up to 1280 devices
- Intuitive user interface with no language kit required
- Networkable up to 64 zones
-
Medium Property Fire Alarm Kit — Battery (Grade F1)
A complete, fully wireless battery-powered fire alarm kit for two-storey homes (typically 2–3 bedrooms). -
SmartCell Wireless Control Panel (No Comms Module) | 24V
- Fully wireless — no cabling required
- Supports up to 64 devices across up to 16 zones
- EN54-2, EN54-13 and EN54-25 certified
-
SmartConnect Touchscreen 1 Loop Addressable Fire Alarm Panel
- 4.3 inch colour touch screen display
- Remote monitoring via a desktop PC or smartphone via the cloud
- Full cause & effect programming via front panel or PC
-
Solo 809 6m Smoke Detector Test Kit
- Smoke detector testing kit only
- 6m reach
- Aerosol based tester canisters
-
White 2 Core Standard Fire Resistant Cable (1.5mm)
- 1.5mm core diameter.
- Sold in 100m reels.
- Fastest standard fire cable to prepare for termination.
- Easy to install and superb working flexibility.
- Suitable for Zone 1 and Zone 2 hazardous area use.
- Retains multiple fire safety certificates.
-
Advanced MxPro 5 – 1 Loop Panel
- Single loop driver card with 2 onboard sounder circuits
- 20 programmable zonal LEDs and 25 system LEDs
- Compatible with AdvancedLive for secure monitoring
-
Apollo Discovery Marine Sounder Visual Indicator Base
- It is possible to set individual control of the sounder and visual indicator
- Volume and tone settings can be selected from the control panel
- Electronic bell tone
- IMO 1A tone included
-
Bull Site Evac Standalone Site Alarm
- Industry standard construction alarm
- Easy activation with large push button
- Durable ABS plastic for construction sites
-
Cranford Controls Remote Indicator With Optional Back Box
- Flush or surface mount variants available.
- Designed to fit to a single gang deep back box.
- Multiple language text option available.
- Custom legend available on request.
- IP66 weatherproof version available.
-
Elmdene STX 24V DC STX Power Supply, Maximum 7Ah Batteries
- EN54 PSU with choice 1, 2 or 5A output
- Enclosure fits up to 2 x 7Ah 12V batteries
-
EMS FireCell Gateway Kit
- Adds wireless FireCell devices to any Apollo XP95 protocol panel
- Complete starter kit — includes detectors, sounder bases, callpoint and radio loop module
- Batteries included — no additional hardware required to get started
-
Esento 12 Zone Repeater Panel
- 12 zone fully functional or passive operation
- Intuitive controls with silence, resound, and reset functions
- Programmable inputs and outputs for enhanced adaptability
-
Fike TwinflexPro2 2, 4 or 8 Zone Fire Alarm Kit
- TwinflexPro2 contractor kit available with 2, 4 or 8 zone panel
- Cost effective starting point for your Twinflex system
-
Fire Alarm Mains Safety Isolator Switch
- Safely isolate mains supply
- Ensures mains supply is only isolated by authorised persons with key
- Meets BS 5839 Part1 2002
- Available in Red or White
-
Kentec Sigma XT+ Multi-Area Extinguishant Control Panel
- Multi-area control - 1 to 4 extinguishant areas
- Dual extinguishant outputs per area with main/reserve configuration
- EN12094-1, EN54-2 & EN54-4 approved
-
Medium Property Fire Alarm Kit — Mains (Grade D1)
Complete mains-powered Grade D1 fire alarm kit for medium-sized domestic properties, including two-storey homes. Includes interlinked smoke and heat alarms with sealed ten year battery backup, plus carbon monoxide protection as standard. -
Noburn VFP-415ERD | Platinum Standard 60 Cable | 4 Core, 1.5mm², Red, 100m
- 4 core & CPC, 1.5mm² red sheath, 100m drum
- LPCB & BASEC certified to BS 7629-1 Standard 60 and BS 5839-1 Clause 26.2d
- Low smoke zero halogen (LSZH) with fire-resistant silicone insulation
-
Solo 811 6m Smoke Detector Test & Removal Set
- Smoke detector testing & head removal kit
- 6m reach
- Aerosol based tester canisters
-
Ziton ZP730-2P Addressable Optical Detector
- Responds to slow burning fires.
- EN54-7 and CPR certified.
- Analogue sensing - reduces false and unwanted alarms.
-
Advanced MxPro 5 – 2 Loop Panel
- Expandable from 1 to 2 loops
- Advanced graphical LCD user interface
- Compatible with AdvancedLive for secure monitoring
-
Apollo Marine Isolating Base
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
- High-brightness LED
- Detects wiring short-circuits
- Minimises disruption from short-circuits
-
Bull Site Evac Wireless Linkable Site Alarm
- Stand-alone or linked option available
- Easy activation with large push button
- Includes flashing 110 decibel sounder
-
Cranford Controls Weatherproof Remote LED Indicator
- IP66 weatherproof protection for external installation environments
- Compatible with conventional and addressable fire detection systems
- High contrast LED with wide area illumination for clear status indication
-
Dycon EN54-4 Certified 24VDC 1.5A, 3A or 5A Power Supply
- Microprocessor controlled operation and protection.
- On-demand battery charging and load output current sharing.
- Battery impedance monitoring.
- Automatic output reconnection after short circuit fault.
- No user-serviceable fuses, outputs protected by electronic E-fuses.
-
EMS FireCell Syncro AS Lite Standalone 1 Loop Panel
- Zonal LED indicators for clear visual status
- Stores 500 last events in an event log for comprehensive monitoring
- Powerful cause & effect programming for versatile customization
-
Fyreye Extra Analogue Addressable Optical Smoke Detector
- Addressable optical detector for Zeta MK1 legacy addressable systems
- Twin LEDs to improve alarm indication
-
Gent Xenex Conventional Panel
- 2, 4 or 8 zone conventional panel from Gent
- Up to 8 conventional sounder circuits
- One-man test and commissioning features
-
Haes Fire Alarm Isolate Switch
- Complies with the recommendations of BS 5839 Pt 1 & BS EN60669
- Suitable for surface or recess fitting
- Low profile lid (15mm)
-
Infinity ID2 2, 4, or 8 Zone Fire Alarm Kit
- Intelligent device identification on 2-wire system
- Built-in sounders and flashers on all detectors
- No end-of-line devices required
-
Kentec Syncro AS Lite 1 Loop Addressable Panel
- Single loop analogue addressable panel with multi-protocol support
- Cost-effective solution for smaller standalone installations
- EN54-2 and EN54-4 certified with 3A power supply
-
Premier EX Pro Automatic Extinguishing Panel
- Combined fire and extinguishing control panel
- 4 x 20 LCD display with countdown timer
- EN54 parts 2 & 4, EN12094 part 1 approved
-
Red 2 Core Enhanced Fire Performance Cable (1.5mm)
- 1.5mm core diameter available
- Fastest enhanced fire cable to prepare for termination
- Easy to install and superb working flexibility
- Twisted cores to provide high level data protection
- Full size CPC (Earth Core)
- Meets 'Enhanced' standards requirements
-
Small Property Fire Alarm Kit — Mains with Wireless Interlink (Grade D1)
A complete mains-powered fire alarm kit for single-floor homes, flats and bungalows, with wireless interlink included. -
Solo 812 8.2m Smoke Detector Test & Removal Set
- Smoke detector testing & head removal kit
- 8.2m reach
- Aerosol based tester canisters
-
Advanced MxPro 5 – 4 Loop Panel
- Expandable from 1 to 4 loops
- Advanced graphical LCD user interface
- Compatible with AdvancedLive for secure monitoring
-
C-Tec BF562 24V EN54-4 Switch Mode PSU
- EN54-4/A2 certified by LPCB and VdS
- User customisable via BF423 configurator
- Available in 1.5A, 3A and 5A output ratings
-
C-Tec CFP AlarmSense 2, 4 or 8 Zone Panel
- Apollo AlarmSense panel
- Available 2, 4 or 8 zones
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones
-
Eaton Conventional Remote Fire Alarm Indicator Beacon
Key Features
- Two-wire and conventional systems
- High visibility LED
- Fits on to a standard, single gang back box
- Aesthetically pleasing
- Quick and simple to install
- Wide viewing angle for increased LED visibility
- Discreet design for incorporation into any decor
- Easy to maintain / service
-
EMS FireCell Syncro AS Networkable 1 or 2 Loop Panel
- Zonal LED Indicators for clear status visualisation
- Stores 500 last events in the event log for comprehensive monitoring
- Powerful and versatile cause & effect programming for customisable control
-
Evacuator Site Master Alarm With Break Glass or Push Button Activation
- Self contained battery operated site alarm.
- Push Button or Break Glass Activated.
- Combined Sounder Strobe.
- Extremely loud 11odB sounder.
- Easily linked units for larger applications.
- ABS moulded plastic casing for durability.
- Manufactured in the UK.