Fire Alarms
Showing 1801–1850 of 1944 results
-
SmartConnect Multi-Loop Card Module
- Designed to EN54 requirements
- Supports up to 250 addresses
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit status indications
- Time saving AUTO-LEARN facility
- 450mA max load (at 20 ohms loop resistance)
- Double address detection
-
SmartConnect Multi-Loop Gas Detection Module
- Each SCM-4-20 module has 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop Panel
- Quick Connect Din Rail Mount
-
SmartConnect Multi-Loop Multi-Input Module
- Designed to EN54 Part 2
- Each input is monitored for open & short circuits
- Extensive front unit status indications (See Datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
- Each input can be configured as either Alarm or Supervisory
-
SmartConnect Multi-Loop Multi-Relay Output Module
- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop Repeater
- 4.3” colour touch screen display
- 8032 event log entries
- Up to 64 panel peer-to-peer network
- 13 status LED indicators
- 5 function button controls
- Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
- Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
- Network can we wired in either a bus or a ring topology if a redundant path is required
- 8 password protected access accounts available (1 admin level, 7 user level)
- Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
- Low power consumption
- Small enclosure
-
SmartConnect Multi-Loop RS485 Network Module
- Designed to EN54 requirements
- Peer-to-peer networking
- Comprehensive cross network cause & effects
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Extensive front unit status indications (See datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
-
SmartConnect Multi-Loop TCP/IP Module
- Designed to EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Remote control via the cloud
- Responsive web interface
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit indications
- Quick and simple to install
-
Soft Pack Document Holder
- Incorporates eyelet hanging point for secure fixing.
- Roomy A4 capacity.
- Screen printed front panel for easy identification.
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos Open Area Beacon with Isolator
- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
Sounder Active EOL For Advanced MxPro 5
- For use with EN54-13 Compliance.
- Supports device removal.
- For use with all MxPro 5 series control panels.
-
Spare Controls Enable Key for Fike TwinflexPro & TwinflexPro 2 Panels, Single Key
- Spare controls enabled key for Fike TwinflexPro & TwinflexPro2 panels.
- Sold individually.
-
Spare Glass For MR20640 Break Glass Key Box
Enter a brief description of your product here. This description will be displayed on product list pages.
-
-
Stainless Steel Cable Tie Tensioner, Black Sideways Style
- Manual tensioning and cutting tool for stainless steel ties.
- Suitable for steel ties up to 7.9mm wide and 0.3mm thick.
-
-
Haes AOV Smoke Vent Control Panel
- Single zone conventional or Twin Wire detection circuit
- Vent status indications & controls
- 3A, 5A or 10A integral PSU
- High spec versions include all available inputs & outputs in a single, off the shelf unit (see Technical Specification)
- False alarm management mode included in all models
-
STI Integral Call Point Protective Cover
- Basic call point protection.
- Complies with BS5839-1:2017.
-
STI ReSet Call Point Replacement Key
- Black plastic STI reset key.
- Sold individually or in packs of 10.
-
STI Stopper Service & Silence Pin
Enter a brief description of your product here. This description will be displayed on product list pages.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs
-
Sycall Reset/Test Key – Set of 10
- Spare reset keys for Sycall manual call points
- Sold in packs of 10
-
SyCALL SY-FMP01 Flush Mounting Plate, Single or Pack of 10
- Bezel to flush mount SyCALL manual call points.
- Sold in packs of 10.
- Sold Individually.
-
Zeta Flush Mount Bezel for CP4 Series Manual Call Points
- Bezel to flush mount Zeta CP4 series indoor manual call points
- Sold Individually
-
Sygno-fi Wireless Translator Module in White or Black
- Loop powered or via external power supply unit.
- Mesh expander technology programmable for redundant path to the translator.
- Site programmable via internal keypad, or via wireless or wired PC connection.
- Full system programming capability from the translator.
-
Sygno-fi Wireless Expander Module in White or Black
- Compatible with Sygno-fi translator and conventional translators.
- Up to 32 wireless field devices per expander.
- Requires external power supply unit.
-
Sygno-fi Wireless Conventional Expander Module in White or Black
- Compatible with wide range of conventional and addressable systems.
- External PSU powered.
- Devices are fully monitored for alarm and fault.
- Dual channel redundancy.
- Long communication range (≅ 1 km in open air).
-
Sygno-fi Wireless Optical Detector in White or Black
- Advanced dual optical chamber design.
- Dual channel redundancy.
- Long communication range (≅ 1 km in open air).
- 10 year battery life.
- Utilises standard low-cost lithium battery technology.
-
Sygno-fi Wireless Heat Detector in White or Black
- Programmable for rate of rise (A1R) or high temperature (BS).
- Dual channel redundancy.
- Long communication range (≅ 1 km in open air).
- 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Sygno-fi Wireless Multi-Sensor Detector in White or Black
- Advanced dual optical chamber design.
- Multiple operating settings.
- Advanced drift compensation.
- Dual channel redundancy.
- Long communication range (≅ 1 km in open air).
- 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Sygno-fi Wireless Indoor Manual Call Point
- Indoor call point for Sygno-fi wireless system.
- Resettable element.
- Supplied with protective covber.
- Dual channel redundancy.
- Long communication range (≅ 1 km in open air).
- 10 year battery life.
- Utilises standard low-cost lithium battery technology.
-
Sygno-fi Wireless Sounder Base in White or Black
- 32 tones settings (primary and secondary for alert and evacuation), selectable via onboard dip switches.
- 4 volume levels.
- 5 year battery life (including 10 seconds weekly test).
- Utilises standard low-cost lithium battery technology.
-
Sygno-fi Wireless Sounder VAD Base in White or Black
- 32 tones settings (primary and secondary for alert and evacuation), selectable via onboard dip switches.
- 4 volume levels.
- 3rd party approval to EN54-3 and EN54-25.
- Choice of Red or White flash colour.
- Available in White or Black plasic housing.
- 5 year battery life (including 10 seconds weekly test).
- Utilises standard low-cost lithium battery technology.
-
Sygno-fi Wireless Base Sounder Cover
- Blanking cap for Sygno-fi wireless base sounder or combined base sounder & VAD.
- Designed for use when no detector is required.
-
Sygno-fi Wireless Wall Sounder in Red or White
- 32 tones settings (primary and secondary for alert and evacuation), selectable via onboard dip switches.
- On site adjustable volume settings.
- Available in Red or White body colours.
- Waterproof certified to IPX5.
- 5 year expected battery life including weekly test.
- Utilises standard low cost lithium battery technology.
-
Sygno-fi Wireless Wall Sounder VAD in Red or White
- 3rd party approval to EN54-3 (type B) and EN54-23.
- 32 tones settings (primary and secondary for alertand evacuation), selectable via onboard dip switches.
- On site adjustable volume settings.
- Silent sounders setting for beacon only use.
- Waterproof certified to IPX5.
- 5 year expected battery life including weekly test.
-
Sygno-fi Wireless Input Module
- Input circuits are fully supervised for alarm and fault conditions (utilising eol resistors).
- 10 year battery life.
- Utilises dual low cost lithium battery.
-
Sygno-fi Wireless Output Module
- Output circuits are fully supervised for alarm and fault conditions (utilising EOL resistors).
- Change over relay and 12/24V output functionality.
- 5 year expected battery life (application dependent).
- Utilises dual low cost lithium battery.
-
Sygno-fi Wireless Remote Indicator
- Programmable remote LED to signal fire, alarm or fault.
- 5 year battery life.
- Utilises standard low cost lithium battery technology.
-
Sygno-fi Wireless Dongle
- Wirelessly connect the PC to the translator.
- Communication range up to 200m in open air.
- Utilises standard low-cost alkaline AA battery technology.
-
Sygno-fi Wireless Survey Kit with Optional Tablet
- One man radio survey for Sygno-fi wireless system.
- Determines required quantity & location of transponders & expanders.
- Optional Android tablet to run required app.
-
Syrex Intrinsically Safe Sounder Beacon
- Sounder Only, Beacon Only and Sounder Beacon Options Available
- Rated for Category 1
- Choice of Lens Options
- Weatherproof to IP65
-
System Sensor Addressable Mounting Base with Isolator
- Low profile (26mm)
- Low Current consumption (100 µA)
- Up to 99 isolators per loop
-
System Sensor BR Deep AV Base
- Deep base suitable for System Sensor AV range
- Supplied with B501AP base
- Available in red or white