Fire Alarms
Showing 793–816 of 2000 results
-
Fyreye MkII Addressable Sounder Control Module With Isolator
- This is not a loop powered device and an adequate 24Vdc input (with battery backup) is needed.
- Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
- Equipped with short circuit line isolator
-
Gent S-Quad Addressable Detector with Voice
- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Solo 460 Cordless Heat Detector Heat Unit Only
- Cordless, battery-powered heat detector tester — no cables or trailing leads
- Compatible with fixed temperature, rate-of-rise and combination heat detectors
- Head unit only — order Solo 461 for complete kit with batteries and charger
-
CAST-PRO CO Fire + Smoke + Heat Multisensor with Sounder & White VAD
- Multiple functionality in a single device
- Advanced algorithms for enhanced detection
- Compatible with C-TEC's ZFP CAST protocol
-
Fike Twinflex Input Output (I/O) Module
- Provides an interface between ancillary equipment and Twinflex zone
- Zone powered
- Mains rated relay contacts
-
Morley MAx 2 Loop Addressable Panel
- 2 loop panel.
- 7” touch screen display.
- 750mA loop capacity.
- Networkable up to 64 panels or 128 loops.
-
Nittan Evolution Combined Optical Smoke & Heat Detector
- Optical Smoke and 54°C (A1R) Heat Sensors in one housing.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Solo 200 Universal Detector Removal Tool
- Rotating colour-coded heads for different detector shapes and sizes.
- Suitable for use on angled ceilings.
- Lightweight.
- Compatible with Solo access poles.
- Lifetime warranty.
-
Fyreye MKII Addressable Detector Base
- Compatible with all MKII range of detectors
- 3 different types of base available
-
Fyreye MkII Addressable Zone Monitoring Unit with S/C Isolator (loop powered)
- This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
- Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
- Equipped with short circuit line isolator
-
Morley MAx 4 Loop Addressable Panel
- 4 loop panel.
- Expandable to 8 loops.
- 7” touch screen display.
- 750mA loop capacity.
- Networkable up to 64 panels or 128 loops.
-
Solo 240V or 110V Mains Heat Detector Tester
- Suits fixed temperature and rate of rise and combination detectors up to 194°F / 90°C.
- Set detectors into alarm within seconds.
- Safe for use at low level or at heights.
- Rapid activation times.
- Lightweight and simple to use.
- Designed for use at height and at angles.
- Supplied with 5m / 16ft cable (additional 5m / 16ft cable available).
-
Eaton BWEXTR24V | BiWire Ultra External Relay Module | 24V Output, IP66 Weatherproof
- 24V DC switching: 1A contact rating for low voltage loads
- IP66 weatherproof enclosure for indoor/outdoor installation
- EN54-18 certified for BiWire Ultra fire alarm systems
-
Morley ZXSe Analogue Addressable Panel
- Multi-protocol.
- Modular concept.
- Simple, robust design to EN54 Parts 2 & 4.
- Intuitive to use.
-
Red 27mm (3/4″) ABS Aspirating Pipe 45 Degree Elbow
- 3/4" (27mm) ABS 45 degree elbow in red
- Suitable for aspirating smoke detection systems
- Compliant with BS 5391 Part 1 and EN54-20
-
Solo 370 Lithium Ion Battery Pack For Solo 365 Smoke Test Head
- Rechargable battery for Solo 365 smoke test head.
- USB connection.
- Fast charge time – 120 minutes.
-
Apollo MiniDisc Remote Indicator
- Small and discrete remote indicator
- Compatable with with Apollo XP95, AlarmSense or Series 65 detectors
-
Morley-IAS DX Connexion 1 Loop Addressable Panel
- Single loop addressable panel from Morley-IAS.
- Multi-protocol support (XP95, ESP or System Sensor).
- All programming can be done via panel and/or software.
- Networkable with other DX Connexion panels.
-
Solo 371 Smoke Generator For Solo 365 Smoke Test Head
- Field replaceable part.
- Easily fits within Solo 365.
-
Infinity ID2 Remote LED Indicator, Wall Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Morley-IAS DX Connexion 2 Loop Addressable Panel
- 2 loop addressable panel from Morley-IAS.
- Multi-protocol support (XP95, ESP or System Sensor).
- All programming can be done via panel and/or software.
- Networkable with other DX Connexion panels.
-
Solo 372 ASD Adaptor For Solo 365 Smoke Test Head
- Adaptor fitted to Solo 365 in place of the standard clear cup.
-
White 25mm ABS Aspirating Pipe 45 Degree Elbow
- 25mm ABS 45 degree elbow in white
- Suitable for aspirating smoke detection systems
- Compliant with BS 5391 Part 1 and EN54-20
-
Infinity ID2 Remote LED Indicator, Ceiling Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop