Fire Alarms
Showing 1551–1600 of 1944 results
-
Fuse Kit For Fire Alarm Engineers
- Boxed kit of most popular fire alarm panel fuses
- Includes a total of 120 fuses
-
Fyreye Common Base
The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.
-
Fyreye Deep Common Base
Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.
-
Fyreye Diode Base
The Fyreye diode base is used on systems that do need line integrity on head removal. This would include all conventional systems that mix detectors & call points on the same line.
-
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Detector Base – Black
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Zeta Standard Protocol Addressable Input/Output Module
- Loop powered
- Equipped with short circuit line isolator
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
-
Fyreye MKII Diode Base
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Diode Base in Black
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Hand Held Programmer Tool
- 2 LED indications. One to indicate that the unit is charging, the other one indicates the status of the detector`s remote LED output.
- Battery Charge state indicator
- Auto-Off when the programmer is not operated for two minutes
- External Reset Funtion
- 20x4 Character LCD Display
-
Fyreye MKII Isolator Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
-
Fyreye Relay Base
The Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Obscuration Test Card Kit For Beam Detector
- Manufacturer: Gent by Honeywell
- Obscuration Test Card Kit
- For Use With Beam Detectors
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
Gent Square Replacement Glass (Pack of 10)
- For use with the "Old Style" Square Gent Call Points
- Dimensions: 68 x 62 x 2mm
- Manufacturer: Gent by Honeywell
-
Gent Vigilon Call Point Cover
Key Features
- Manufacturer: Gent by Honeywell
- Designed for use with the Gent Vigilon Call Points
- Hinged Design For Access To Call Point Element
- Made from Polycarbonate Plastic
- Helps prevent accidental & malicious alarm activations
-
Gent VS-KEY Spare Door Key for Vigilon & Compact Panels
- Spare door key for Gent Vigilon & Compact panels.
- Available individually or in packs of 10.
-
Gent XENS-SPARES Spares Pack For Xenex Panels
- Spare pack for Gent Xenex panels.
- Includes EOLs, battery link, screws and fuses.
-
Gent: Call Point Test Key – Pack of 10
Key Features
- Gent - Call Point Test Key - 14112-10 (Pack of 10)
- This is a replacement Test Key for Gent Manual Call Points.
-
GeoFire Weatherproof Door Holder
- Robust steel construction
- 1200N holding force
- Sealed against water ingress
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
Haes 134 Access Control Keys, Sold In Pairs
- Access control keys for Haes control panel.
- Sold in pairs.
-
Haes 4 Way Sounder Circuit Extension Card
- Four monitored sounder circuits
- Compatible with existing sounder circuits
- Includes fault monitoring relay
-
Haes 8 Way Output Card For Conventional Panels
- 8 x switched -ve outputs
- 8 x volt free changeover relay outputs plus 8 x switch -ve outputs
- Common or zonal operation
-
-
Haes BRISOL-R Boxed Isolate Relay
- 8 amp double pole relay.
- Contacts rated at 250v ac.
- Isolate key switch.
- Isolated LED indicator.
- Option to use key switch to energise the relay.
-
Haes BRLDA Lockdown Alert Alarm Pulsing Relay
- Provides pulsing or continuous alert of the impending lockdown of a building.
- 8 amp double pole relay.
- Use with existing re control panel.
- Key switch activation.
- Alarm status LED indicator.
- ON & OFF pulsing times independantly programmable up to 15 seconds for truly customised ringing pattern.
- Suitable for surface or flush fitting.
-
-
Haes Excel-EN Network Card
- Network up to 8 control panels
- Add up to 8 repeater panels to the network
- Card also includes 6 programmable switch -ve outputs
-
Haes Fire Alarm Panel 107 Spare Barrel Keys (Pair)
Spare 107 Key for Haes Fire Alarm Panel Keyswitch -
Haes LOCK801 Replacement Lock Assembly & Keys for Haes Control Panels
- Replacement lock assembly for Haes control panel.
- Included a pair of 801 keys.
-
Haes Replacement Keyswitch Assembly For Esento Evoque, Excel, Eclipse Esprint & Fusion
- Replacement / spare key and lock
- Ideal for Haes fire alarm panel doors
- Old part number: SWK107WIRED
-
Heatshrink Crimp Terminal Butt Connectors, Pack of 100
- High quality crimp terminals.
- Adhesive heat shrink insulation.
-
High-Quality 316 Grade Stainless Steel Cable Ties – Packs of 100
- High quality Stainless Steel cable ties.
- Standard in 316 grade stainless steel.
- Sold in packs of 100.
-
Hispec Mains Smoke & Heat Detector With Interconnect
- Contains both a smoke chamber & a heat sensor.
- 10 year rechargeable lithium battery back up.
- Interconnectable with up to 20 units over 8m max.
- Fast Fix base included.
-
Hispec Mains Smoke & Heat Detector With RF Pro Wireless Interconnect
- Contains both a smoke chamber & a heat sensor.
- Wirelessly interconnect up to 20 detectors
- 10 year rechargeable lithium battery back up.
- Loud 85dB alarm.
- Fast Fix base included.
-
Hispec Mains Smoke Detector Detector With Interconnect
- Optical smoke detector.
- 10 year rechargeable lithium battery back up.
- Interconnectable with up to 20 units over 8m max.
- Fast Fix base included.
-
Hispec Mains Smoke Detector Detector With Interconnect, 9V Battery & Fast Fix Base
- Optical smoke detector.
- 9v Battery Backup included.
- Interconnectable with up to 20 units.
- Fast Fix base included.
- Hush feature.
- Loud 85dB alarm.
- Test button
- Tamper proof.
-
Hispec Mains Smoke Detector With RF Pro Wireless Interconnect
- Optical smoke detector.
- Wirelessly interconnect up to 20 detectors
- 10 year rechargeable lithium battery back up.
- Loud 85dB alarm.
- Fast Fix base included.
-
Hispec Mains Sounder
- Ideal for general signalling and fire use.
- General signalling tone options.
- 10 tones (user selectable).
- Two stage alarm.
- Automatic synchronisation.
- Alert and alarm function.
- Improved tone clarity, reducing confusion.
-
Hispec Mains Strobe Light
- Fire alarm Visual Indicator Device (VID).
- Connects directly into a Hispec fire alarm system via the WHITE low voltage interconnect cable.
- Ideal for general signalling.
- Designed to give a visual warning if a Hispec alarm system has been triggered
BESA box mountable. - Red flashing LEDs.
-
Hispec Wireless Control Unit
- Wireless control unit.
- One button with three functions - Test, Locate & Silence.
- Control up to 19 alarms.
- Powered by a 10 year sealed lithium battery.
- Control up to 19 alarms.