Fire Alarms
Showing 1401–1450 of 1726 results
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
Howler Call Post
The Howler Call post is a tough, powder-coated backboard that comes with statutory signage, mounting holes and fixings suitable for each type of Howler Alarm.
-
Howler SA01 Site Alert With Strobe
- Standalone site alarm
- LED visual strobe & 100dB @ 1m sounder
- Ability to link 20 units together with a 2 core cable
- Powered from 9V battery (included)
- IP55 rated
- Howler branded (the leading name in site alarm)
- 2 year warranty
-
Hush ActiV Grade C Stand-Alone Domestic Fire Alarm Kit
- Grade C fire detection
- Monitored for faults
- 72-hour standby battery
-
Hyfire Economy Single Loop 16 Zone Control Panel
- Economy Hyfire control panel.
- 16 zonal LEDs.
- Available with option keyswitch.
-
Toccare Mini Lite Half Loop Touch Screen Control Panel
- A totally touch screen panel with easy to use interface.
- The panel takes 2 x 12v 7amp batteries
- Compact & convinient enclosure.
- Supports up to 15 repeater panels.
- 4 on-board relays and 2 sounder circuits.
-
Hyfire HFW-W2W-01 Wireless Translator Module
- Hyhire wireless translator module.
- Gateway between Hyfire wireless devices & control panel.
- Loop powered.
- Compatible with up to 7 expander modules.
-
HyFire HFW-EM-01 Wireless Expander Module
- Wireless signal expander for Hyfire system.
- Compatible with dynamic, static and conventional translators.
- IP protection for mounting in challenging environments.
- Capability for 32 wireless field devices per expander.
-
Hyfire HFW-PA-05 Wireless Dual Optical Smoke Detector
- Advanced dual path optical chamber design.
- Internal algorithm processing optimises performance.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire HFW-TA-05 Wireless Heat Detector
- Hyfire wireless heat detector.
- Multiple sensitivity settings.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire Static Wireless Sounder Base
- Wireless operation with 150m range
- 32 sounder tones with dual volume levels
- 3 year battery life with standard lithium batteries
-
-
Hyfire HFW-SBCW-05 Base Sounder Cover Plate
- Blanking cap for Hyfire sounder or sounder/beacon bases.
- Compatible with HFW-BS-05 or HFW-BSB-05 bases.
-
Hyfire HFW-PB-01 Spare Primary Batteries, Pack of 10
- Primary battery cell for Hyfire Static devices.
- Sold in packs of 10.
-
Hyfire HFW-SB-01 Spare Secondary Batteries, Pack of 10
- Secondary battery cell for Hyfire Static devices.
- Sold in packs of 10.
-
ICAM IAS / ILS Coarse Filter Replacement Filter Element, Pack of 10
- Replacement coarse filter for ICAM IAS or ILA units.
- Sold in packs of 10.
- Available in Black or White.
-
ICAM IAS / ILS Fine Filter Replacement Element, Pack of 10
- Replacement fine filter for ICAM IAS or ILA units.
- Sold in packs of 10.
-
ICAM ILS Dual Channel Air-Sampling Smoke Detector
- Dual channel smoke detection
- Laser air-sampling smoke detection
- Up to 18 holes per channel (Class C)
-
Identifire 12 or 24V Single Gang Power Supply
- Works at 12 or 24 V dc selectable via link.
- Consistent Identifire design.
- Can be surface or flush mounted.
- Bright green LED power indicator.
- PCB cover to protect users from mains voltage.
-
Identifire 24 or 12V Auxiliary Relay
- Flush or surfaced mounted options Mains voltage switching capability.
- 4 x 20 mm knockouts for surface and glanded cable entry.
- Terminals to allow daisy chaining of multiple units.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
- Bright LED indicating unit activation.
- Consistent look and feel to all other Identifire products.
-
IdentiFire Remote LED Indicator With Optional Buzzer
- Very bright, easily visible LED.
- Suitable for use on both conventional and addressable alarm systems.
- Available as flush or surface mounted option.
- Available with optional buzzer.
-
Identifire TriTone Conventional Sounder
- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
Identifire Wide Voltage Relay
- Wide Voltage range for multipurpose use.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
- Terminals to allow daisy-chaining of multiple units.
- Flush or surface mounted options.
-
Infinity ID2 Remote LED Indicator, Ceiling Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Infinity ID2 Remote LED Indicator, Wall Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Intelligent Auto-Aligning Beam Detector
- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified
-
IP65 Weatherproof 24V Power Supply
- IP65 rated PSU suitable for outdoor applications.
- Optional battery charging.
- Options fault outputs.
-
IS FlashDome Intrinsically Safe Beacon
- Intrinsic safe certified beacon.
- Suitable for zones 0, 1 or 2.
- IP66 rated.
-
Isolatable Timer Relay | 24V DC with Key Switch | Adjustable Delay (0-5 Mins) | Red Boxed
- Adjustable 0-5 minute timer delay with visual LED indication
- Keyswitch isolation prevents unwanted activation during testing
- Dual trigger inputs: 24V DC or fire alarm bell circuit
-
JSB FX2200 2 or 4 Zone Conventional Panel
- 2 or 4 zones panels
- Flexible, high specification system
- Simple “one-shot” auto-reset user test facility
-
JSB FX2200 Conventional Fire Repeater Panel
- Flexible, High Specification System
- Simple Auto-Reset User Test Facility
- Class Change and Programmable Fire/Fault Relay
- Third Party Approved
-
-
KAC ENscape Sounder Conventional Sounder Shallow Base Only
- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
-
KAC Indoor Single Pole Keyswitch
- Indoor keyswitch with single pole relay.
- Option of 2 or 3 position keyswitch.
- Option for key to be trapper or un-trapped.
-
-
KAC Plastic Resettable Element For Call Points
- Compatible with the New Type KAC Call Points (See related products)
- Enables the call point to be reset after alarm is activated
- Yellow indicator on plastic element indicates to user that the call point has been activated.
-
KAC SC087 Spare Keys for 3 Position Keyswitch, Pack of 6
- Replacment keys for KAC 3 position keyswitches.
- Sold in packs of 6.
-
Kentec Sigma XT Ancillary PCB
- 24V DC powered boxed ancillary board
- Two-wire serial RS485 connection with additional power cores
- Volt-free relay outputs for remote subsystem control
-
Kentec B3225 | Replacement Cabinet Lock | Fits Sigma CP, XT & Syncro AS Enclosures
- Compatible with Kentec panels ending M1, M2, L2, H2, F2, M3, H3, D3, M4
- Complete barrel and key assembly set with model 801 key
- Mini camlock design for Kentec and Syncro panel cabinets
-
Kentec Conventional Panel Enable Key
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Economy Software Download Lead
- Universal compatibility with Syncro, Solo and Solex panels
- Essential for panel programming and commissioning
- Works with Loop Explorer configuration software
-
Kentec Fire Alarm Documents Box
- Matches design & colour scheme for standard Sigma CP/XT and Syncro AS control panel ranges.
- Easy to install.
- Key Lockable.
- Designed for versatility.
- Choice of small or large capacity enclosure.
-
Kentec Fire Alarm Panel Spare Key Set
- Spare keys for control panels
- Compatible with Sigma, Taktis, Syncro
- Pack of five keys
-
Kentec Sigma CP Sav-Wire Two-Wire Fire Alarm Panel
- Two-wire version saves installation time and wiring costs
- Available in 2, 4 or 8 zones to suit a range of installation sizes
- Fully certified to BS EN54-2 and BS EN54-4
-
Kentec Sigma CP-R Conventional 2-8 Zone Repeater Panel
- Two-Wire Serial Connection
- Up to 7 Panels Per System
- Full Control Over Main Panel
- 1.2mm Mild Steel Construction
-
-
Kentec Vision Window Retrofit Tamper Resistant Vision Window
- 2 minutes to fit on site.
- Kit available from stock.
- Colour to match standard Control Panel ranges.
- Special colours available on request.
- Fits any M2, H2, M3, H3 and M4 sized control panel.
- Attractive design.
- Key lockable.
-
Kentec Vizulinx Alarm Management Gateway In Optional Enclosure
- Monitor fire alarm activity on your workstation or device.
- Receive alerts by email, SMS or pager.
- Easy user subsription function - opt in/out via text.
- Defined message notification for manager, engineers or building occupiers.
- Compatible with Modbus protocols.
- Configuratruion through embeded web server.
- Quick setup, user friendly operation.
- Internal memory event log.